Boat fishing opens up horizons that are not available from shore, allowing you to reach the deepest and most promising points of the reservoir. It is in such conditions that when the sonar shows a sharp drop in depth or a flooded driftwood that the first thing comes to the fore. plumbIt's a technique that requires not only the right location, but also specialized equipment that can withstand the vertical jerks of large fish.
Many beginners make the mistake of trying to use regular jig rods, which often prove to be too long or soft to work effectively in the vertical plane. Spinning for sheer fishing It has to have a special margin of strength and rigidity, allowing you to literally pull the predator from the depths, not allowing him to escape into the driftwood. Understanding the physics of the process and the specifications of the tackle is the key to stable catches.
In this article, we will discuss in detail why the length of the rod plays a critical role, what test is necessary to work with heavy lures and how to properly equip the gear for maximum efficiency. You will learn about the nuances of choosing coils, fishing lines and baits, which are ideal for vertical flare.
Features of the choice of spinning for vertical flare
The main thing about plumb fishing is that it's not just a throwing rod, it's a vertical wiring and a cut. In classical jig fishing, the spinning should have a parabolic long-range casting system, but it's not the case here. You need a tool that allows you to feel every touch with the bait of the bottom and react instantly to the bite. So, rod-line It is moving towards Extra Fast (superfast).
The second critical parameter is the test, because fishing is often done at great depths with strong currents, the weight of the baits can reach 60-80 grams or even higher. Using a spinning test with an inappropriate test will lead to the fact that you simply can not control the game of bait or, worse, break the form when you cut. vertical-wiring.
⚠️ Warning: Never use rods with a dough below the required weight of the bait. Overload the form when working vertically leads to breakage not only of the top, but also the klum due to the critical angle of bending.
The length of the rod is another parameter that is radically different from shore or classic boat models: for comfortable work in the plumb, the optimal length is from 1.5 to 1.9 meters. Longer whips will interfere with the control of the boat, get confused in gear and create excess sailing in the wind, which reduces sensitivity.
The optimal length of spinning for fishing in a plumb from a small PVC boat is 1.6-1.8 meters. This allows you to work comfortably with one hand without touching the sides and equipment.
Test and construction: technical requirements for the rod
When choosing spinning-test For steep fishing, you need to focus on the depths and currents in your area. For medium depths of 10-15 meters, rods with an upper limit of 40-50 grams are quite suitable, but if you plan to hunt on deep eyebrows or on rivers with strong currents, where the jet blows the line into the arc, you will need a more powerful tool.
Strike. Extra Fast So the rod is only running at the top, and the comet is staying stiff, and that's a very fast cutoff, which is critical when you use a wicker line that doesn't stretch very much, and the soft rods lose because they swallow the rod, and the hook may not actually penetrate the predator's hard mouth at great depths.
Consider the main parameters of the choice depending on the fishing conditions:
- 🎣 Light class: test up to 20 g, length 1.5-1.6 m - for shallow water and perch catching.
- 🎣 Middle class: test 20-50 g, length 1.7-1.8 m - a universal option for perch and pike.
- 🎣 Heavy class: test 50-100+ g, length 1.8-2.0 m - for deep-sea trolling in a plumb and a strong jet.
Graphite (carbon) provides the necessary rigidity and minimal weight, which reduces the fatigue of the brush when playing monotonous bait. Fiberglass models are too heavy and inert, their use in steep fishing is not advisable, unless you are looking for a budget option for rare trips.
Coil and line: creating a harmonious gear
Choosing a coil for plumb The most common use of non-essential coils is because they are more common to most anglers and allow easy tension adjustment. The size of the spools should match the power of the rod: for average tests, the optimal model size is 2500-3500 according to the Shimano classification.
Particular attention should be paid to the gear ratio. For vertical wiring, high-speed coils with a gear ratio of 5.5:1 or higher are preferred, which allows you to quickly select the slack of the fishing line after a predator jerks or quickly raise the bait into the upper layers of the water. Low-transmission traction coils are less convenient here, because they slow down the rate of fishing.
As a working line, the uncontested leader is the wicker cord. The monophilic line stretches very hard, and at a depth of 10-15 meters you simply do not feel the careful poking of the perch. A wicker cord It has zero tensile strength, high tensile strength and excellent sensitivity. The diameter of the cord is matched by the weight of the bait: for a test up to 40 g, the cord #0.8-#1.0 according to the Japanese classification will fit.
The friction brake of the coil should be perfectly adjusted. In steep fishing, the cut-off often occurs by a sharp swing of the rod upwards, and if the friction is pulled, you can easily break the lip of the fish or the fishing line itself. If it is too weak, the predator will go into the driftwood.
⚠️ Warning: Always check the condition of the wicker cord before each fishing, and scuffing and fretwork reduces strength by 50% and can cause the trophy to break off at the side of the boat.
Lures for sheer fishing: balance, splash or jig?
The range of lures for plumbing is quite wide, but each has its own specific application, the classic of the genre is vertical sequins, which, when lifted and lowered, make oscillatory movements, attracting a predator, and are effective at passive fish when slow, smooth play is required.
Jig lures, especially foamfish and silicone jig heads, dominate the catch of the pike. The foam, because of its buoyancy, rises above the bottom even when the wiring stops, which often provokes an attack. Active-playing silicone vibrotails are good at catching large areas and finding an active predator.
Balancers also find their way into the field, especially for bass and pike, and their horizontal game allows you to capture the space around the hole or the side of the boat, but for deep-sea fishing, balancers may be less effective because of the tees being swept by the line.
Below is a table to help you choose a bait depending on the conditions:
| Type of bait | The best predator. | Depth. | Feature of the game |
|---|---|---|---|
| Vertical splash | Sudak, Bersh. | Anything. | Planning, brilliance |
| Furfish | Sudak | Donna | Floating position, vertical position |
| Silicone vibrating tail | Pike, Perch. | Medium | Active tail vibration |
| Balancer | Perch, Pike. | Up to 10m. | Horizontal jerks |
The secret of the trickiness of the foam
Furfish are often impregnated with liquid attractants or salt. The porous structure of the material absorbs perfectly and retains the scent for a long time, creating a plume that attracts the perch from a long distance.
Search tactics and wiring technique
Success. plumb It depends 90 percent on the right location, you have to find a dip, a dip, a dump in a hole or a freestanding snag, and without a sonar or a navigator with a depth map, that fishing becomes a lottery, and when you anchor upstream from a perspective point, you start to catch the sector.
The wiring technique is to rhythmically raise and lower the tip of the rod. The swing amplitude can vary from 20 to 50 cm. After the swing, there is a pause during which the bait plans or falls to the bottom. It is at the pause that the bite most often occurs. The duration of the pause is selected experimentally: active fish likes a short cycle, passive - long fainting.
It's important to keep a constant eye on the horizon where the bait is, and the predator can stand in half water, and the bait's thud on the bottom will only scare him away, use the timeline of the fall or watch the fishing line to stop the bait in the right layer of water.
- 🎯 Search: Move along the sounder, marking points with the presence of fish or characteristic relief.
- 🎯 Cuttering: Stand so that the cast (lowering the bait) occurs against the flow or across the stream.
- 🎯 Tag: Start with aggressive play for search, then move on to smooth wiring.
The basic principle of tactics: if one point after 10-15 wirings no bites, change the place. Falling in the plumb is an active search, not waiting for one nickel.
Frequent mistakes and professional advice
One of the most common mistakes is to use a rod that is too long. Many anglers are used to 2.7-meter-long sticks and try to catch them from a boat, which results in the gear clinging to clothes, making it difficult to row or control the motor, and sensitivity is reduced by a large lever.
Another mistake is ignoring the weather, and in high winds, it's almost impossible to catch plumbing, the boat is demolished, the line is sailed, and the bait is lost, and in such cases it's better to go to bottom fishing for a throw or use heavier tools, sacrificing delicacy.
Professionals also advise that you keep safety in mind: Falling from a boat is often done standing or sitting in a high seat, which increases the risk of falling overboard when a large fish is cut sharply. Always have a hook extractor and a yawner on hand to minimize contact time with pike teeth.
⚠️ Warning: When fishing from a boat, always use a safety slip for a rod. A sharp jerk of a large pike or catfish can easily snatch the spinning from your hands, and it will instantly be at the bottom.
Frequently Asked Questions (FAQ)
Can I use spinning for jig in the fall?
Yes, you can, but there are nuances. Spinning should be quite rigid (Fast or Extra Fast) and have a margin of safety on the dough. Soft jig sticks will fall when cut at depth, and you lose a lot of fish.
How long should a spinning be for catching from an inflatable boat?
The optimal length for PVC boats is from 1.5 to 1.8 meters. Longer rods will rest on the sides, interfere with the work of oars and create discomfort when catching fish when you need to quickly bring it to the board.
Do I need a nod to spinning for sheer catch?
Classic spinning doesn't use nods because sensitivity is provided by a blank and a wicker line, but some anglers put soft nods on top to visualize careful bites when fishing on the current when the line is pulled into the arc.
☑️ Checking the gear before getting on the water
In summary, it can be said that plumb-fishing It's a specialized tool that requires a smart approach to choice and operation, and a well-chosen gear that fits the fishing conditions and the weight of the baits makes fishing fun and productive. Don't be afraid to experiment with wiring and tooling, and a trophy pike or pike will be your catch.