The PVC boat, 370 cm long, is one of the most popular formats among fishermen and water enthusiasts. polyvinyl chloride It requires protection from sun, rain and mechanical damage, and here comes the awning accessory, which not only prolongs the life of the swimmer, but also makes it more comfortable to use. PVC 370What to look for when buying, and what models have earned the trust of water engines in 2026.

Many boat owners mistakenly believe that the awning is only for storage, but in fact it has several functions: protects against ultraviolet (which destroys PVC), prevents foliage and debris, and in camping conditions can serve as a temporary shelter from bad weather. accelerate the wear of the boat due to friction or condensationTherefore, their choice must be approached responsibly.

Why you need an awning for a PVC 370 boat: 5 key features

The awning is not just a case, but a multifunctional accessory. Let's consider the main tasks that it solves:

  • 🌞 Protection against UV radiationPVC loses its elasticity and cracks when exposed to the sun, and a high-quality awning blocks up to 95 percent of UV light.
  • 🌧️ WaterproofingEven if the boat is under a canopy, condensation or oblique rain can get in, and a water-repellent tent solves this problem.
  • 🍂 Garbage protectionLeaves, dust, bird droppings, all of which shorten the life of the boat and require regular cleaning.
  • 🚤 Convenience of transportationSome models of awnings allow you to transport a boat on the roof of the car without the risk of damage.
  • 🏕️ Temporary shelter on the hikeIn the folded conditions, the awning can be used as a canopy or a tent.

It's important to understand that cheap thin polyester awnings often don't do these things, like getting water through the seams or breaking through the wind, so the cost of quality savings is more expensive in the long run.

⚠️ Attention.: If you keep a boat outside in winter, a regular summer awning will not work. You need a model with reinforced seams and vents to avoid condensation and mold.

Types of awnings for PVC 370 boats: which one to choose?

All boat awnings PVC 370 It can be divided into three main categories by design:

  1. Bag cases They're the simplest and cheapest, they're suitable for storing boats folded down, and they don't protect them when they're disassembled.
  2. Cloak tents They're versatile, suitable for boats assembled and disassembled, usually with zippers or Velcro straps to fix.
  3. Frame tents A premium variant with aluminum or plastic arcs, providing maximum protection, but more expensive and heavier.

The awnings also differ in materials:

Materials Pluses Cons Average price (per m2)
Polyester 300D Light, breathing, not rotting. Weak resistance to mechanical damage 800–1200 ₽
Oxford 600D Durable, waterproof, UV protection Heavier than polyester, more expensive. 1500–2500 ₽
PVC fabric 100% waterproof, durability No breathing, condensation is possible. 2000–3500 ₽
Sheet Eco-friendly, resistant to abrasion Heavy, absorbs moisture. 1000–1800 ₽

For the boat. PVC 370 The best choice will be Oxford 600D It's a PU coating, and it's a balance between strength, weight and price. If you're on a budget, you can consider it. polyester 300DBut only for summer storage.

📊 What kind of awning material do you prefer?
polyester
Oxford
PVC
Sheet
I know.

Size and fastening: how not to make a mistake with the choice

One of the most common questions:What size awning is required for a PVC 370 boat?“It is important to consider not only the length but also the width of the boat as assembled and the height of the sides.

Standard parameters for a PVC 370 boat:

  • Length: 370-380 cm (with a margin for fastenings)
  • Width: 150-180 cm (depending on the model of the boat)
  • Height: 40–60 cm (for cape awnings)

When choosing, pay attention to:

  • 📏 Adjustable belts They allow you to fit the awning under a specific boat.
  • 🔗 Type of attachment: zippers, Velcro straps, buckle belts or a combination.
  • 🌀 Ventilation openings are required to prevent condensation.
⚠️ Attention.: If your boat is of a non-standard shape (for example, with high sides or a throng for an outboard motor), order an awning with a customized cut. Universal models may not fit well in such cases.

Measure the boat in assembled and folded |

Check the height of the sides (especially if there is a transom)|

Check for additional elements (seats, console)|

Leave a stock of 10-15 cm in length and width for ease of wearing-->

TOP-5 awnings for PVC boat 370 in 2026

Based on the reviews of water engines and tests, we have compiled a rating of the best awnings for boats with a length of 370 cm All models are tested in practice and have high scores in terms of price / quality.

  1. Fladen Pro Cover 380 (Oxford 600D, PU-coating)

    Best choice for year-round storage: reinforced seams, lightning around the perimeter, ventilation valves. Suitable for transom boats. Price: 5,800 RUB.

  2. Salmo Elite 370 (Polyester 300D with UV protection)

    Budget option for the summer season: light, fast drying, there are belts for fixing. Minus: not suitable for winter storage. Price: ~3,200.

  3. Koder Kover 375 (PVC fabric, frame)

    Premium model with aluminum arcs. Perfect for long parking on the street. Weight: 8 kg. Price: 12,500 RUB.

  4. Nerpa Tent-370 (Oxford 420D, domestically produced)

    The best combination of price and quality, with a window for inspecting the boat without removing the awning, price: 4,500 RUB.

  5. Intex Boat Cover (Polyester, universal)

    Suitable for Intex boats and similar models, light, but not designed for severe frosts, Price: 2,800 RUB.

When choosing, pay attention to manufacturer's warranty. For example, Fladen and Salmo The warranty is 2 years, and for domestic brands it is often limited to 1 year.

💡

Before buying, check if there is a case for storing the awning, which will extend its life by 20-30%.

Step by step instructions: how to properly wear and fasten the tent

Even the most expensive awning won't protect the boat if it's not installed correctly.

  1. Preparation of the boat

    Make sure the boat is PVC 370 Clean and dry. Remove the sand, the leaves and other impurities. If the boat is wet, the awning will cause mold to appear.

  2. Tent-laying

    Spread out the awning on a flat surface next to the boat. If the awning is bilateral, place it on the front side down (usually the side with the logo).

  3. Wearing a tent

    Carefully pull the awning on the boat, starting with the nose. If the awning is lightning, first fasten it by 2/3, then spread the cloth and zipped completely.

  4. Fixation

    Tighten all the straps and Velcro straps. Make sure the awning fits tightly, but don't pull over - this can warp the boat.

  5. Ventilation check

    Open the vents (if any) to prevent condensation from building up inside.

If the awning is fitted arch-frameFirst, assemble it separately, then put it on the boat and fix it.

What to do if the awning does not fit?

If the awning is too small, try the following:

1. Grease the edges of the boat with soapy solution (this will make it easier to slip).

2 Start putting on the awning from the stern, not the nose – sometimes this helps to evenly distribute the material.

3 If the awning is new and rigid, let it get used to the shape of the boat for 1-2 days.

If nothing helps, perhaps the awning is the wrong size – contact the seller for a replacement.

Care for the tent: how to extend the service life

The awning, like the boat itself, requires regular maintenance, and here are the basic rules that will help to preserve its properties:

  • 🧼 Cleaning.: Wash the awning with warm water with a mild detergent (no chlorine!). Use a soft bristling brush.
  • 🌡️ Suit: Always dry the awning before storing. The wet awning is covered with mold.
  • 🧴 ImpregnationOnce a season, treat the tent with a water-repellent spray (for example, Nikwax Tent & Gear SolarProof).
  • 🔧 RepairsSmall cuts can be sealed with special patches of the same material (sold in boat shops).

Keep the awning in a cover in a dry, ventilated room. Avoid direct sunlight - even UV-protected materials burn out over time.

⚠️ Attention.: Never wash the awning in the washing machine or use bleach. This destroys the water-repellent coating and reduces the lifespan by 2-3 times.
💡

Regular care of the awning increases its lifespan from 3-4 to 7-10 years, saving you money on replacement.

Frequent errors in the selection and operation of the tent

Even experienced water-engineers sometimes make mistakes that lead to premature wear of the awning or boat, and here are the most common of them:

  • ❌ Buying a closet awning This causes the material to become tense and torn apart by wind gusts.
  • ❌ Ignoring ventilation - an awning without valves or with poorly fixed zippers collects condensation, which leads to mold.
  • ❌ Storage of awning wet - even once left moist awning can be covered with fungus, which cannot be removed.
  • ❌ Off-season use of awning Summer models cannot withstand snow load, and winter models are too heavy for summer operation.

Another common mistake. mounting the awning to the boat with scotch or insulatingThis damages PVC and leaves sticky marks that are difficult to remove. Use only regular belts or special mounts.

Can I use the PVC 320 awning for the 370?

No, it's not recommended. PVC 320 It's too short, and the boat is not protected, and the tension of the material can cause tears, and it's better to pick up a tent with a margin of length. Fladen Pro Cover 380 It's good for a boat 370 cm.

Which awning is better: with lightning or on belts?

This depends on the operating conditions:

  • Tents. lightning It is more convenient for frequent use (for example, if you lower a boat every day).
  • Tents. strap-on They are more secure and better suited for long-term storage.

The best option is a combined model (lightning + belts), for example, Salmo Elite 370.

Do I need to remove the awning from the boat during transportation on the roof of the car?

Depends on the type of awning:

  • Bag cases and garment You can not remove them if they are well fixed.
  • Frame tents (for example, Koder Kover) it is better to remove - the arcs may be damaged in high winds.

In any case, check the reliability of the boat attachment to the roof - the awning should not hang out.

How to protect the awning from rodents in winter?

Rodents often spoil awnings, especially if the boat is stored in a garage or shed.

  • Use it. metal-trap Or ultrasonic scarbing.
  • Handle the tent spray-driven (for example, "Anti-Girlzon").
  • Keep the tent in. tight-cover It's made of thick fabric.

Do not use poisons – they can damage the material of the awning.

Can I sew a tent for a PVC 370 boat on my own?

Theoretically, yes, but it requires expertise and special materials.

  • Oxford 600D or PVC fabric (Sold in shops for tourists).
  • Strong. polyester And a sewing machine with a zigzag function.
  • Furniture: zippers, Velcro straps, buckle belts.

Without experience, the seams can disperse at the first wind, so it is better to buy a ready-made awning or order tailoring from professionals.