The search for a reliable fishing or recreational vessel often leads a potential buyer to the products of the Novosibirsk plant Tonar, which has been holding a leading position in the market for many years, offering a wide range of products made of reinforced polyvinyl chloride. Official website The company serves as the main source of reliable information about technical specifications, configuration and current prices, avoiding misunderstandings when buying.
Unlike many homemade manufacturers who assemble boats in garage conditions, tonar It uses automated cutting and gluing lines, which ensures high sealability of the seams. Visiting the manufacturer's resource, you get access to a full catalog, which presents both budget rowing models and complex motor-running options with inflatable keel bottoms. factory-guarantee The ability to obtain service support are key advantages of buying from an authorized dealer or directly from the manufacturer.
In this article, we will discuss the range in detail, present a comparative table of popular modifications and give expert advice on choosing the best model for your tasks. Whether you plan to raft on rough rivers or calm fishing on the lake, a competent approach to studying the catalog will help you not to overpay for unnecessary options.
Advantages of buying from an official manufacturer
The inflatable boat market is saturated with offers, but buying directly from the plant or its authorized representatives has a number of undeniable advantages. quality control At every stage of production, Tonar strictly enforces gluing technology using time-tested adhesives and materials that are resistant to ultraviolet light and temperature changes.
The second important aspect is the full availability of certificateWhen you purchase goods from the official website, you get the product passport required to register with the GIMS (if required by law for this model) and issue a warranty, which protects the buyer from counterfeits, which are often found in retail chains with dubious reputations.
When ordering through the official website, always check the serial number of the product in the passport - it must match the number on board the boat.
In addition, direct contact with the manufacturer allows you to quickly resolve the issues of spare partsIf the valve is damaged or a repair kit is required during operation, the official dealer will be able to provide original components that will fit your model perfectly, while third-party resources often offer universal, but not always compatible analogues.
⚠️ Beware of duplicate sites that copy the design of official resources. Always check the domain name and contact details listed in the About or Contacts section.
Overview of the model range of boats Tonar
The plant’s product range can be divided into several key categories, each focused on a specific segment of the boating range, with classic rowing boats designed for calm water and small water bodies, which are simple, lightweight and affordable, making them an ideal choice for beginners.
The most complex and popular group are boats with inflatable keel bottom (BDB)These models, often denoted by an abbreviation NDMA In catalogs, they have excellent driving qualities, and the presence of a rigid transom and an inflatable keel allows you to install powerful engines and move comfortably even in the presence of a small wave, effectively dissecting the water surface.
Specialized models developed for specific operating conditions deserve special attention, such as reinforced bottom modifications for rocky shores or high-load variants for long expeditions. The choice of a particular model depends on the expected load and conditions of use.
- 🚣 Rowing models Lightweight, compact, ideal for transportation in the trunk of a passenger car.
- 🌊 Keel motor - provide high speed and stability, suitable for the installation of motors up to 18 hp.
- 🎣 Specialized - have additional mounts for sonars, fishing rods and other equipment.
Technical specifications and materials
The basis of durability of any boat tonar The official website provides detailed specifications stating that five-layer reinforced fabric is used for production. PVC This material has a high density, usually between 750 and 1100 g/sq.m., which provides exceptional tensile and puncture strength.
The design of the sides and bottoms also plays an important role, and most modern models use a pasted paiola (flooring) technology that creates a rigid platform and distributes the load. inflatable tubes They're divided into compartments, which ensures buoyancy even if one of the sections is damaged, and the valves used in the design are petal-like, which prevents air etching and allows the boat to be pumped up quickly.
Features of seams
All the seams on Tonar boats are laced together using two-component polyurethane adhesives, which ensures a monolithic bond that is as strong as the material itself, unlike crosslinking methods where microholes remain.
The important parameter is the load capacity and the number of seats. The table below compares popular models so you can navigate in size and capabilities.
| Model | Length (cm) | Width (cm) | Load capacity (kg) | Engine power (hp) |
|---|---|---|---|---|
| Tonar 220 | 220 | 110 | 220 | 2.0 |
| Tonar 280 NDLD | 280 | 130 | 350 | 5.0 |
| Tonar 320 NDLD | 320 | 145 | 450 | 9.9 |
| Tonar 360 NDLD | 360 | 160 | 600 | 15.0 |
Motors and additional equipment
The official website offers not only the boats themselves, but also a wide range of compatible equipment. mounted-engineThese engines are designed specifically for small-sized boats, and they are lightweight, low noise and fuel efficient, making them ideal fishing companions.
In addition to powertrains, the catalog features a variety of comfort-enhancing accessories, including soft back seats, bags with carry straps, remixes and pumps, and the availability of original accessories ensures that all elements will fit perfectly with the design of the boat.
When choosing a motor, it is important to consider maximum power allowedExceeding this parameter can lead to the destruction of the transom or loss of controllability on the water. For models with NDND, it is recommended to choose long-leg motors for better immersion of the propeller.
- ⚓ Anchoring devices - rings, leers and anchors of various scales for reliable parking.
- 🛡️ Protective elements - kilsons, timbers and linings on the bottom.
- 🔋 Electrical equipment - battery holders, transom wheels for ease of transportation.
⚠️ Attention: installation of the motor above the declared in the specifications cancels the warranty on the product and can be life-threatening.
Instructions for selection and purchase
The process of choosing a boat on the official website requires careful study of the specifications. First, decide on the number of people who will be in the boat at the same time, and add a stock of 50-70 kg on equipment. Then choose the type of bottom: flat for calm water, for wave and speed - necessarily keel.
☑️ Checklist before purchase
Then you have to pay attention to the package. Some models are sold in the basic version without a pump and bag, which allows you to reduce the price, but you will need to buy accessories separately. Other versions, labeled as "Lux" or "Kit", already contain everything you need to get on the water.
Ordering on an official resource is usually a form with contact details and delivery method. It is important to check the availability of goods in stock, as popular models in the season can be sold out.
The optimal choice for universal use is a model 320 cm long with NDNDD: it is still transportable in folded form, but already allows you to confidently walk with the engine.
Care, storage and safety on water
To the boat tonar After each use on salt water, the vessel must be thoroughly washed with fresh water to avoid corrosion of the accessories and the destruction of the adhesive seams. Drying should be carried out in the shade, as direct sunlight on the inflated boat can cause tissue to rupture due to air expansion.
Store the product in a dry room at a temperature not lower than -20 ° C and not higher than +40 ° C. Before long-term storage (winter) the boat should be cleaned of dirt, dried and slightly sprinkled with talc to avoid sticking together layers of PVC. It is recommended to fold in a free state, avoiding the formation of sharp cavities.
Water safety is priority number one. Always carry a life jacket by passenger number, anchor and repair kit. Even short-term watering requires checking the pressure in the cylinders and no visible damage.
How to keep a boat in the winter?
The boat should be washed, dried and folded into a bag, stored in suspension or on a shelf to eliminate the pressure of heavy objects, and the optimal storage temperature is room, but an unheated garage is allowed, as long as the temperature does not fall below critical values for PVC.
Can I seal the boat by myself?
Yes, small punctures can be repaired with a remix that comes with the kit, the surface is degreased, glue is applied, and a patch is put in the same material, and for serious damage, you should contact an authorized service center.
What glue is used for repairs?
For the repair of PVC boats, a special two-component polyurethane glue is used. Conventional household adhesives will not provide the necessary elasticity and water resistance of the seam, so their use is not recommended.
Do I need to register the Tonar boat in GIMS?
Registration is required for vessels weighing more than 200 kg (in running order) or with an engine powering more than 8 kW (about 10.8 hp). The exact weight of your model is indicated in the product passport. Most lightweight rowing models do not require registration.