The trolling of predators in large bodies of water provides fishing opportunities that are not available in coastal or classical spinning fishing. PVCIt allows you to effectively capture vast areas, explore deep-sea bays and pits where trophy fish hide. However, the floating polyvinyl chloride has its own design features that dictate specific equipment and safety requirements.
Unlike metal or fiberglass boats, inflatable boards extinguish vibration, which makes the process of catching more delicate, but requires special attention to the attachment of equipment. squirrel-engine And the smart gear turns a compact inflatable boat into a powerful tool for catching pike, pike and catfish, and it's important to understand that success depends not only on luck, but also on technical preparation for getting on the water.
Modern materials allow you to create PVC vessels that can withstand severe loads and water turbulence, but ignoring the rules of operation can lead to emergency situations. In this article, we will discuss in detail all aspects of the organization of trolling, from the choice of sonar to tactical methods of wiring Wobblers at different depths. A critical safety parameter is the distribution of cargo and passengers weight strictly along the diametrical axis of the boat during movement.
Selection and preparation of PVC boats for trolling
The basis of successful fishing is a reliable boat. For trolling, models with a length of 3.2 to 3.8 meters with inflatable or rigid are optimally suited. keelThe inflatable keel provides better wave germination and course stability, which is critical when wiring baits. Hard floor (NDND or peel) is necessary for easy installation of spinning racks and leg fixation when working with tackles.
When choosing a transom, you should pay attention to the design of the transom. To install a motor with a power of more than 5 hp, the transom must be reinforced and rigidly connected to the cylinders. A weak transom under load will begin to "play", transmitting vibration to the hull and creating discomfort. Also important is the buoyancy margin: an overloaded boat becomes roller and is less controlled, especially when moving against the wind.
The cockpit requires a thoughtful approach, spaces for anchorings to keep them from getting tangled in the propeller, often using slats or perimeter fences to fix the gear, and the interior spaces to be protected from spray, which can be used for. spray-drink Or high-security cylinders.
⚠️ Warning: Never exceed the maximum load capacity specified in the product passport. When trolling, the weight of the engine, fuel, anchors, passengers and equipment is added, and exceeding the limit dramatically reduces the stability of the vessel.
Equipment: motor, sonar and navigation
The engine is the heart of your floating platform. PVC boat trolling is ideal for four-stroke engines with power from 5 to 9.9 hp. They are quieter, more economical and more environmentally friendly than two-stroke counterparts. electrorivator (engine emergency stop systems) is mandatory - the cable is attached to the fishing clothes, and when falling overboard, the engine stalls automatically.
Without a sonar, trolling becomes meaningless riding. For an inflatable boat, the best fits are compact side-scan models or classic sonar sensors that are attached to a transom or a temporary bracket. It is important to adjust the sensitivity of the device so that you can see not only the bottom relief, but also the thermocline, where the predator often stands.
Navigation is done using a GPS module built into the sonar or a separate handheld device. Tracks allow you to return to the verified points, and the "trolling control" function helps to maintain a uniform speed, which is a key success factor. wiring speeds usually vary from 2 to 5 km / h depending on the activity of the fish.
Use an external GPS antenna attached to the bow of the boat if the sounder is not catching the signal well due to the awning or low position of the sensor.
You can use lagas to control your speed, but experienced anglers often use GPS readings and bait behaviors. If a wobler starts to lose or surface, you have to slow down. The accuracy of course retention also depends on the quality of the motor and the availability of the vehicle. long-legIt allows you to raise the lower unit higher, improving streamlining.
Trolling gear and baits
Trolling gear should have a high safety margin. The rods are selected from 1.9 to 2.4 meters in length with a test of 20 to 60 grams. Short sticks are more convenient when caught in a limited cockpit space, as well as when using downriggers. The coils are preferable multiplier, with good traction and forester.
As the main line, a wicker cord with a diameter of 0.12-0.16 mm is used. It has no extensibility, which allows you to feel the most careful bites at long distances. A metal or Kevlar leash is necessarily installed in front of the wobbler, protecting the tooling from the pike teeth. The leash should be at least 20-30 cm long.
- 🎣 Wobbles-creaks: They have an active game of their own and create powerful vibrations, attracting a predator from a long distance.
- 🎣 Minnow: Require more delicate wiring, but often show the best result on passive perch and pike.
- 🎣 Deep-sea models: They have a large spatula and sink to 6-8 meters, working at the bottom.
Special attention should be paid to the coloring of baits. In clear water and in good light, natural tones that mimic feed fish work; in murky water or at depths, bright, acid colors and models with noise cameras are more effective. Experiments with the size and horizon of the wiring are key to finding a working combination on a particular day.
The secrets of the Woblers' color
It's been observed that in sunny shallow waters, blue or green backed wobbles are better at simulating perch or roach. In cloudy weather or at deep eyebrows, the predator is more likely to attack contrasting orange, yellow or white baits, which are clearly visible in the dusk of the depth.
Downriggers and Outriggers: Empowering Opportunities
For serious trolling at depths of more than 4-5 meters, standard long-floating wobblers may not be enough. Downriggers come to the rescue, devices that allow you to lower the bait to a specified depth with the help of a cargo. For PVC boats, there are compact models that are attached to the board or transom without breaking the tightness.
The use of a downrigger allows you to bait strictly in the horizon of the fish, without overloading the rod with the weight of the cargo. When you peck the fishing line easily comes out of the clip, and catching is done in a standard way, which makes it possible to use light tackle to catch large fish at great depths.
Outriggers are used to breed gear sideways to avoid overlapping with multiple fishing rods at once. In an inflatable boat, telescopic racks are more commonly used that can be folded quickly, and they allow you to increase the catch area and present different lures to the fish at different distances from the board.
| Parameter | downrigger | Outrigger. | Gliderboard |
|---|---|---|---|
| Substantive function | Depthing the bait | Handling of tackles | Setting up gear |
| Applications for PVC | Possibly (compact models) | Widely applied | It requires caution. |
| Impact on speed | Increases resistance | Minimum | Average |
| Setup complexity | High. | Low. | Medium |
⚠️ Warning: When installing a downrigger on board an inflatable boat, make sure the mounting point is on a rigid element (stringer or jar) and not on a soft balloon, otherwise the device may damage the fabric or roll over.
Search and posting tactics
Trolling is an active search, and you should go along the dips, dumps, pit edges, and underwater highlands, and you should build a route so that the lures pass over an interesting terrain, and if you see fish on the sounder, but there are no bites, you should change the speed, the wiring horizon, or the type of bait.
There is a technique of lazy trolling, where the boat moves very slowly, almost under tension, which provokes a flaccid predator. Conversely, high-speed trolling (up to 7-8 km / h) can activate an aggressive pike or ass. It is important to constantly monitor the sonar readings and adjust the course.
☑️ Action plan for reaching the point
When fishing on the current, you need to consider the demolition of the boat. Going against the current allows you to better control the wiring horizon, but requires more power from the motor. Driving along the current saves fuel, but requires constant adjustment of the course so that the baits do not get confused. The best option is often to move across the current ("halsami").
The secret to trolling is constant experimentation. If the deep sea crotch doesn't work today, try a shallow minnow on a 40-50-meter vacation, maybe the fish is higher than the sounder shows.
Safety and rules of conduct in the water
An inflatable boat is more vulnerable to puncture than a rigid hull. Every time you go out, you have to have a visual inspection of the cylinders, the transom and the bottom. You have a refit, a pump and life jackets for every passenger, it's a requirement, not a recommendation. Life is more expensive than any fish.
When trolling, the gear is in a strained state, and if you hook or bite sharply, you can get a fish out or break the rod. All movements should be smooth. Particular attention should be paid to fixing the spinnings: falling expensive gear into the water and then overlapping the fishing line around the screw can lead to loss of the engine or a serious accident.
Weather is a must. In open water, the wind creates a wave that can be fatal for a small PVC boat, and if the wind is stronger, you should immediately stop fishing and head to shore, even if the pecking has just begun, and an inverted boat is a risk of hypothermia and loss of equipment.
What if the boat starts poisoning the air on the water?
Don't panic. If the bullying isn't critical, move slowly to the shore. If the balloon falls off quickly, inflate it with a pump (hand or foot). In case of emergency, use a sealer or even clothes, plugging the hole to warm to the land. Always have a spare camera or patches at hand.
How to properly store a PVC boat after the season?
The boat should be thoroughly washed with detergent, dried in the shade (not in the sun!) and folded in a free state. Do not store PVC in compressed form under heavy objects. The optimal storage temperature is from +5 to +20 degrees. Every six months it is recommended to lay the boat and blow the cylinders for inspection.
Can an electric motor be used for trolling?
Yes, electric motors with a capacity of 30 lb (pounds of thrust) and above are excellent for trolling at short distances and in places where ICE noise is prohibited. However, the range is limited by the battery capacity. For full-fledged trolling on large reservoirs, the electric motor is often used as an auxiliary for accurate positioning.
Which anchor is better for PVC trolling?
Optimal anchor-cat or folding anchors Denforth weighing 1.5-2.5 kg. They have good engagement and compact storage. the main thing is to use the anchor end with a bayrep and correctly calculate the length of the rope (at least 3-4 depths at the parking point).