Fishing from a swimming facility opens up completely different horizons for the angler, which are not available when angling from the shore. The ability to approach any point of the reservoir, anchor above a promising brow or slowly drift over a flooded bucket changes the requirements for tackle. fishing-rod Often differs from the classic coastal version not only in length, but also in the design features of the handle and ring weighting.
In limited space, the deck, whether spacious boat Or a compact PVC boat, a long rod becomes more of a hindrance than an assistant. Maneuvering the tackle requires compactness, high sensitivity and the ability to catch trophies almost vertically, and understanding these nuances will allow you to assemble a tackle that will turn every outing into a productive fishing trip.
It is a mistake to think that any short rod is suitable for a boat, and the specificity of boat fishing dictates its harsh conditions in terms of dough, formation and materials of the rings. The optimal length of the rod for most boat technicians is from 1.8 to 2.4 meters.This ensures the perfect balance between control of the fish and ease of transportation.
Criteria for choosing a boat fishing rod
The first and most important thing about the gear is the length of the gear, and unlike onshore fishing, which often requires sticks of 3.6 meters or more to throw far away, you don't have to throw it far away. You're already at the catching point. So, rod It is becoming a standard for fishing comfortably even in high winds or when in a tight cockpit.
The second critical aspect is the rod test and its sensitivity. Boat fishing often involves the use of heavy feeder feeders or massive jig heads on the current. The rod must have sufficient safety margin to lift the fish from the depths without using a lift, which can be uncomfortable on the boat, but the form must remain informative.
The material of the rings also plays a role, especially if you plan to use wicker cords. Fluorocarbon inserts (SiC) or type rings Gold Concept They provide better sliding and resistance to abrasive wear. On a boat, the load on the rings increases when vertically fished, so you should not save on fittings.
ā ļø Note: When choosing a rod, pay attention to the length of the handle. For a boat, models with a shortened handle or no komla part are ideal, so that the lower edge does not rest on the side or seat when working with a tackle.
Types of tackle: from spinning to onboard fishing rod
The range of fishing gear used by the boat is varied, but all gear can be classified by method of fishing, and the choice of the specific type depends on the target fish and the conditions of the reservoir.
- š£ Flight fishing rods - specialized gear of small length (0.6-1.2 m), designed for fishing in plumb on the current, they are often equipped with a nod and are designed for catching bream, gusters or sazan.
- š£ spinning - For the boat choose models up to 2.1 m long with a fast formation (Fast or Extra FastThis allows for sharp cutting and forced catching, preventing the fish from escaping into driftwood.
- š£ trolling rods These are powerful, large dough sticks designed to wiring large wobbles at depth, with reinforced rings and a powerful comb section.
Special attention deserves multiplier In boat fishing, especially when trolling or jigs from great depths, the use of a multiplier coil is often preferred over a non-inertial one, which provides better traction and bait control.
For lovers of bottom fishing there are specialized feeder They differ from the classics in a more rigid form and often have a removable handle, which allows them to be compactly stored in a funduke, which allows you to effectively catch on a strong current, where conventional gear blows into the arc.
Equipment and installation: the specifics of the boat version
Equipping a boat rod requires a special approach to the selection of coil and forest material. Since the fishing distance is usually not more than 20-30 meters, the requirements for winding and flight range are reduced, but the requirements for strength increase.
The coil must have a reliable friction brake, as the dragging often occurs "upside down." The size of the 2500-4000 spoole according to Shimano classification is universal for most tasks.
āļø Checking the equipment before exit
The main cord is usually a wicker, which is not stretchable, which is critical for short-range bites and hard-cut deep-season, and is used less frequently, mainly for fishing with caution or in conditions where stealth is important.
| Type of catch | Recommended length | Test (g) | Type of coil |
|---|---|---|---|
| Onboard (bream, sazan) | 0.6. 1.2 m | 20 ā 60 | Inertial/non-sustainability |
| Jig from the boat | 1.8.2.1 m | 10 ā 40 | Uninertial/Multiplier |
| trolling | 1.9 - 2.4 m | 30 ā 150+ | Multiplier |
| A sheer glitter | 1.5 - 1.8 m | 10 ā 30 | Multiplier/Unintelligence |
It is important to properly adjust the gear before the start of fishing. Balancing rods and coils in boat conditions come to the fore, since it takes a long time to hold the tackle in your hands, and the amplitude of movements is limited.
Tactics of catching in the plumb and on the flow
Boat Fishing on the current requires constant control of the boat, and using an anchor or anchor cable allows you to lock the boat with your nose against the current, which is the most convenient position for fishing, in which position the fishing rod is in front of the angler, and he can control several tackles at once.
When fishing in plumb depths, the technique of "playing" with bait is often used, and the rod is held in your hand, giving short strokes of the brush. nod In this case, it's the primary bait signaler, and it has to be matched to the weight of the bait so that it can straighten 30-40 degrees under the load.
If the current is weak or absent, the free drift method is effective, the boat moves slowly in the wind, catching large areas, in which case it is convenient to use short spinning or winter fishing rods with a coil, lowering the bait vertically or making short throws to the side.
Safety and ergonomics on board
Boat Fishing is not only fun, it's also a high risk. A mis-abandoned tackle can get entangled in the engine propeller, and a sudden jerk of a large fish can cause a fall overboard, so safety should be the number one priority.
Always use a safety rod for tackles. If you're fishing on an expensive tackle or at a depth where a cliff means losing a kilogram of cargo, tie the rod comet to the boat's design element. This elementary rule saves hundreds of fishing rods every year.
ā ļø Warning: Never place a fishing rod across the side so that the line hangs. When a fish jerks sharply or the fishing line is hooked on a stationary object when the boat moves, the rod can be torn from the hands or broken.
The ergonomics of the workplace are also important, and the fishing rods should be positioned so that you don't hit the motor, sonar or other gear when you fish. Cord-stands (holders) shall be securely secured and placed at an angle convenient for cutting.
Handling after fishing
The aquatic environment, especially salt water or water with a high content of minerals, aggressively affects the materials of the gear. After each fishing, you need to conduct an audit of the equipment. Fresh water washes away salt and dirt, preventing corrosion of metal parts.
Pay special attention to the coil. The timber-layer mechanism and the scooter need to be wiped with dry rags. If the coil has been submerged in water (which happens often on a boat), it is advisable to disassemble and lubricate it, or at least blow it with compressed air.
Check the rings. Micro-cracks on the inserts can rub expensive wicker cord. On boat gear, the wear of the rings is faster due to the use of heavier loads and frequent contact with the sides.
Frequently Asked Questions (FAQ)
Can I use a regular fishing rod to catch from a boat?
Theoretically, it's possible, but it's extremely inconvenient. Fly fishing rods have no rings or coils, which makes it impossible to maneuver fish at depth. For a boat, it's better to use a Bologna fishing rod or specialized spinning.
What is the optimal length of the fishing rod for a PVC boat?
For inflatable boats where space is limited, the best models are 1.8-2.1 meters long. Longer rods will constantly touch the water or get confused in equipment.
Do I need a boat ride when Iām fishing?
It's very difficult and risky to get fish, especially large ones, on board 40-50 cm without a lift.
Which line is better to choose: a wicker or a monophile?
For jig and trolling, it is definitely a wicker, it is more sensitive and stronger. For fishing on float gear or in clear water on careful fish, a monophilic fishing line or fluorocarbon is better suited.