Fishing with nets is traditionally associated with the presence of a boat, whether it is an PVC inflatable boat or a reliable metal boat. networking It can also be done from shore, if you know the right technique and the specifics of the water body, and it requires a lot of physical training, a lot of ground knowledge and a lot of safety, but it can actually get fish in places that are hard to reach.
Coast fishing has its own unique features that radically distinguish it from the classic fishing from the water. squirt, loaders and correctly calculate the flight trajectory of the tackle. Successful installation of the network from the shore is possible only in the presence of a gentle, uncluttered bottom and the absence of a strong current at the fishing site. Ignoring these factors can lead not only to the loss of expensive equipment, but also to serious injuries.
In this article, we will go through all the nuances of the process, from choosing the right gear to the technique of extracting it, you will learn how to prepare the place, what are the methods of throwing and what mistakes are most often made by beginners. fishing net It is a serious tool that requires a responsible approach and compliance with the law.
Selection of tackle and preparation for fishing from the shore
The first and most important step is to choose the right one. networkFor coastal fishing, heavy structures with powerful cargo rebounds designed to work from motorboats are categorically not suitable. gillnet The weight of the gear should be minimal so that the angler can throw it at the desired distance by hand or with the help of auxiliary devices.
Special attention should be paid to cargo and floating rebounds. The ruzils should be removable or light enough not to weigh the structure when casting. The floats are chosen bright and with good buoyancy, so that you can visually monitor the position of the tackle in the water. reed-netting, which have a specific design that facilitates their staging in overgrown places without the use of a boat.
In addition to the network itself, you need to prepare additional equipment. anchor Or heavy rocks to fix the edges of the tackle, and a strong tether cord. Don't forget cut-proof gloves, because working with the netting cloth requires caution, and you should also prepare a catch tank in advance and a place to dry the tackle after fishing.
⚠️ Note: Before fishing, make sure that netting is legal in the area, and many regions have strict restrictions on gear types, fishing seasons, and even a complete ban on net fishing for recreational purposes.
Selection and analysis of the installation site
The success of shore fishing depends 80 percent on the right location. Unlike boat fishing, where you can adjust your position, from shore you are limited to your range. The ideal place is a gentle, shrub-free, tall-tree-cleaned shore. Having overhanging branches or tall grass will make it impossible to cast normally and, most importantly, safely extract gear.
The bottom of the reservoir should be smooth, without sharp changes in depths, driftwood and dense aquatic vegetation. Chatches. If the net gets tangled by a snag at the bottom, it's almost impossible to pull it out without going into the water, and the risk of tearing an expensive canvas is one hundred percent. Visually assess the surface of the water: the absence of whirlpools and ripples often indicates hidden obstacles under the water.
It's also important to consider the direction of the wind and the current. The wind is always thrown at the wind or at a slight angle to make the net spread out in the air and lay down on the water correctly. If there's a strong side wind, the network can blow away before it touches the water, which will lead to overflow. The current must be weak, otherwise the network will simply fold up and fall into harmony, losing its catchability.
Technique of casting nets from the shore
There are several basic ways to install a network from the shore, and the choice depends on the width of the reservoir and the type of gear. squirrelOne end of the network (with loads) is tied to a heavy load or anchor, which is thrown into the water, while the network is carefully placed in rings or in a special box, so as not to get confused when unrolling.
The second is for lighter gear, and it involves hand casting. The fisherman takes the net at one end, spins it overhead, and sends it into the water with a powerful motion. This requires good physical shape and coordination. It is important that the net travels along a gentle trajectory and falls on the water with a flint, not a lump. thrower or slingshots for the delivery of goods over long distances.
The third option is to install a fording net, where the depth allows, the angler enters the water, gradually unwinding the net and fixing its ends with stakes on the shore, which is the most reliable method in terms of installation quality, but requires special equipment (vagabond) and appropriate water temperature.
☑️ Checklist before net throw
In any form of squashing, it is critical to ensure that quarry-cord It's got to be a little bit long, and it's got to be free, no knots, no loops, and once it's in the water, you have to give it time to dive and spread, and it usually takes 15 to 30 minutes, depending on the type of loader and the current.
Table: Comparison of installation methods
To better understand the differences between the methods of installation, we will look at their main specifications in a comparative table, which will help you choose the optimal strategy for specific fishing conditions.
| Method of installation | Equipment required | Complexity | Efficiency |
|---|---|---|---|
| A squirting squirt. | Load, cord, net. | Medium | High (at distance) |
| Hand-drive | Lightweight network | High. | Medium (small distance) |
| Ford installation | Stray suit, stakes. | Low. | Maximum |
| With a slingshot. | Powerful slingshot, cargo leader | High. | High (accuracy) |
Catch and recovery process
Removing a net from shore is a process that requires as much attention as setting it up: pulling the net slowly and evenly, without any sudden jerks, and the sharp tension can cause the fish to get scared and break out, or the net to break against hidden rocks. Sample It is made by hand, going through the rebounds and carefully releasing the fish that you find.
If the net is long, it makes sense to use two boxes: one for clean tackle, the other for catch and debris (algae, branches). The fish from the cell should be removed against the wool, freeing the gill covers. Large fish entangled in the canvas sometimes have to be carefully cut out of the net if it is severely stuck, but experienced fishermen try to avoid this, so as not to spoil the tackle.
It's important to remember safety when extracting. Wet rocks on the shore are slippery, and a strained net can suddenly slip and hit. Always keep your feet at a safe distance from the trajectory of the tackle. If you work in pairs, one person chooses the net, and the other helps to lay it and release the catch.
⚠️ Warning: Never wind a berth cord on your arm or body! With a sharp pull of the net or a strong current, the cord can tighten the loop, leading to severe injuries or even drowning. Keep the cord only in your hands, controlling tension.
Typical errors and safety techniques
One of the most common mistakes of beginners is to try to throw too heavy a net. It's not only inefficient, it's dangerous. The net can fail to make it, get entangled in the air and knock the angler off its feet. Always start with light tackles and short distances, gradually building up your skill. Also, often ignore bottom checks, which leads to constant hooks and time wasted.
Another mistake is not keeping the net properly after fishing, and wet nets rot quickly, especially if they are stacked in a pile. The net-cloth It needs to be thoroughly rinsed in clean water (especially if the fish was in salt water or dirty water) and dried in the shade. Direct sunlight destroys the structure of synthetic fibers, making the net brittle.
Safety techniques for shoreline networks should be iron. Always carry a sharp blade knife to cut a tangled cord quickly if necessary. Don't work alone on remote and wild shores where help may not arrive in time. Respect nature: don't leave behind line trimmings, bags and other debris.
Frequently Asked Questions (FAQ)
Can I put a net without a boat on a river with a strong current?
On rivers with strong currents, installing a net from shore is extremely difficult and often impossible, and the current will tear down the net without letting it spread, and create huge sailing, which can lead to the rig breaking off or the fisherman tipping over if he is in the water, which requires a boat or special engineering structures (barrels), the installation of which requires permits.
What is the optimal length of the net for throwing from the shore?
For manual casting or use with shore devices, the optimal network length is from 10 to 25 meters. Longer canvases (30-50 meters) is almost impossible to install from the shore without the use of mechanized means or boats, as there is a high risk of entanglement and uneven immersion.
Do I need to register the network if I put it on the shore?
Yes, the need to register a network does not depend on how it is installed (boat or shore), but on the laws of the region and fishing regulations. In most cases, amateur nets must be labeled with the owner's data, and their use is allowed only at certain times and in certain places.
How to cleanse the net of sludge and algae after fishing?
Fresh tin is easiest to remove by rinsing the net in running water. If the algae dries, you can soak the net in a container of water and add a small amount of vinegar or a special means to clean the nets. Mechanical brushing is only possible for rough nets, thin web can be damaged. The main thing is to let the net dry completely before storage.