Summer is not only a time of rest by the water, but also a time when the predator changes its habits, going from the shore to deep brows and underwater plateaus. It is during this season that fishing for spinning from a boat becomes most effective, allowing you to catch hard-to-reach areas of the reservoir, where you simply can not get bait from the shore.
But successful fishing requires not just a boat, but also a specific training of equipment, and you will have to adapt your usual coastal techniques to the conditions of pitching, wind and limited space. Horizontal wiring In deep water, it becomes a key success factor when the sun warms the upper layers of water, driving the fish into cool pits, and proper preparation for the summer season can turn a routine outing into a trophy hunt.
In this article, we will discuss all the nuances, from the choice of the boat to the intricacies of animation jig on the flow. trolling It can be as sporty as the active cast, and it can be a good way to make a cockpit comfortable with spinning. Summer fishing is full of surprises, and only the one who is ready for them goes home with a full cage.
Selection and preparation of floating craft for spinning fishing
The first thing that a fisherman who is planning a summer fishing trip from the water has to do with choosing the right boat. For spinning fishing, PVC inflatable models with hard floorboard or inflatable bottoms are often the ideal option, providing the necessary stability in throwing and catching, which is critical for safety and comfort. Metal boats, or Kazankas, are also popular, but their noise can deter a cautious predator in hot, quiet weather.
The key to choosing is the width of the body and the presence of a spacious cockpit. You should be comfortable getting up, cutting and maneuvering the spinning without touching the sides. Load capacity The weight of the motor, fuel, anchor, sonar and several people in the sum should not exceed the permissible norms. The overloaded boat becomes unstable and dangerous, especially when the wind gusts or wave.
And the anchor system, too, is that you need at least two anchors to be able to catch the point effectively, one on the bow and one on the stern, so you can stretch across the current or the wind, and this allows you to lock the boat in the right position without using a motor that scares the fish away with its noise.
⚠️ Warning: Never tie the anchor tile to a transom or non-loading structural elements. Always use an anchor snag or a leer, otherwise the boat may flip or pull under water when hooked.
Equipment of spinning for fishing from the board
Boat spinning is very different from shore-based spinning. Because the range of the throw often fades into the background (you can get close to the snag), the first one is the sensitivity and power of the catch. The optimal length of the rod is from 1.8 to 2.1 meters. Longer forms in the boat create unnecessary inconveniences, cling to tackles and interfere with motor control.
The rod test must match the baits and fishing conditions used. Summer fishing for a pike at depths often requires weights of 20 to 60 grams to break through the thermocline and reach the bottom. Strike. The rods are preferable to fast or ultrafast, which provides a clear cut at a long distance vertically and good sensory when nipping. The hard form also allows you to force the fish to catch, preventing it from going into driftwood.
The coil must be reliable and contain a sufficient supply of cord. The wicker cord, 0.12-0.16 mm in diameter according to the Japanese classification (PE 0.8-1.0), is the standard for jig fishing. It does not stretch, passing each bait touch to the bottom, and has a high burst load. Monophile fishing line is used less often, mainly for wobblear fishing, where its extensibility is important for the cushion of jerks.
Use fluorocarbon leash 1-1.5 meters long, even if you are not afraid of pike teeth, it is less noticeable in clear summer water and protects against sharp shells at the bottom.
An important element of equipment is the correct selection of fittings. Carbines, turntables and winding rings should be of high quality, from proven brands like Owner or DecoyIn summer, the load on the tackle increases due to the activity of large fish, and cheap fittings can cause the loss of the trophy.
Navigation and fish search: sonar and GPS
Modern boat fishing is unthinkable without a sonar, and it becomes the eyes of the fisherman, allowing you to see the bottom relief, the presence of driftwood, the brows, and of course the fish itself. In summer fishing, the GPS module is critical, and it allows you to save the coordinates of the catch points (to point) and return to them the next time you go out.
When looking for a predator in the summer, you should pay attention to the thermal separation of water, or thermocline. Fish often stand strictly in a certain horizon, where the water temperature is most comfortable for them. Side scanning. (SideVü/DownVü) provides an opportunity to study the structure of the bottom in detail at a distance of up to 100 meters to the side of the boat, finding individual sunken trees or stones.
Navigating the depth map (kartplotter) allows you to plot your route in advance, planning out the catches of the prospective areas, and you can see where the dump ends and the watering begins, which is a classic pike parking spot, and without navigation, finding fish becomes a chaotic wander that rarely yields stable results.
| Parameter | For small rivers | For large reservoirs | For the lakes. |
|---|---|---|---|
| Sensor frequency | 200 kHz (details) | 50/83 kHz (depth) | Mid-frequency |
| Radiation power | Up to 500 watts. | 1,000 watts. | 600-800 W. |
| The need for GPS | High. | Critical | Medium |
| Type of card | Detailed navigation | Batimetric | Normal contour |
Secrets of echo sounder setup
Many anglers don’t know that sensitivity needs to be reduced when fishing in shallow water to remove unnecessary illumination from the bottom, and it’s also worth turning off Auto mode and adjusting the depth range manually to see the terrain details more clearly.
Tactics of fishing and choice of baits in summer
Summer fishing tactics are dictated by the behavior of the fish. In the heat, the predator often becomes passive during the day and becomes active at dawn or sunset. The main method of searching is to fan the catch of perspective points, the boat anchors or is fixed by an electric motor, after which a series of throws are made in different directions.
Silicone vibrotails and crustaceans dominate as the main lures in the summer. The size of the lure can vary: for passive perch, edible rubber is used in the size of 2-3 inches, and for active pike, large vibrotails are from 4 to 7 inches. A key feature of summer fishing is the need to use heavy heads for rapid delivery of bait to depth, bypassing the layer of warm water.
Besides jig, deep-sea wobblers and ratlins work perfectly, and they're done in the bottom layer or in the waters using techniques. trolling The Wobbles allow you to quickly penetrate a large area and find an active predator, and for perch, small spit-up spit-and-wool minnows are effective, which are carried at the surface or in the gulfs above the grass.
☑️ Checking before reaching the point
It's important to experiment with the color of the baits. Natural colors work better in clear water (machine oil, green, transparent with sequins), and bright "acid" colors in cloudy or deep water. Color change often helps to stir fish when other methods don't work.
Technique of wiring and work with gear
The wiring technique from the boat has its own peculiarities because of the vertical position of the rod. In the classic jig step, it is important to control the bait touch of the bottom. The rod is held almost vertically upwards, raising the tip when winding and lowering when paused, this allows you to feel even the most cautious fish pokes.
Fishing on the current often uses wiring to demolish. The boat becomes cross-current, and the bait is released downstream, periodically winding the line. This animation simulates a floating fish and provokes a predator to attack. For Wobblers, twigging wiring is effective: a series of sharp jerks at the tip of the rod with pauses.
- 🎣 Classic step: 2-3 turns of the coil - pause 2-3 seconds - control of touching the bottom.
- 🎣 Snatch wiring: a sharp swing of the rod by 30-40 cm - a sample of weakness - a pause.
- 🎣 Dragging on the bottom: slow winding with periodic twitching, bait raises a cloud of mud.
Special attention should be paid to the cutoff. In deep water, because of the blowing of the cord by the wind or current, the cutoff must be powerful and wide. Sometimes you need to take a step back or sharply lower the rod to the water to pick out the slack and cut through the hard mouth of the pike or pike.
⚠️ Warning: When catching large fish, never raise the rod vertically upwards ("to the zenith"). This can cause the form to break. Keep the rod at an angle of 45-60 degrees and work mainly with the coil using a friction.
Safety and equipment on the water
Boat fishing is a pleasure that should not be overshadowed by trouble. The basic rule is that every person should wear a life jacket, buttoned on all the fastexes. In summer, in the heat, many people neglect this rule, but a sudden squall or hook can lead even an experienced angler to fall overboard.
The equipment should protect not only from water, but also from the sun. A headdress with wide fields, polarizing glasses (which also help to see fish in the water), and clothing with ultraviolet protection (UPF 50+) are mandatory. Sunburn and heat stroke are real risks of summer fishing.
The boat should always have a minimum safety kit: a water pump scoop, a spare anchor, a cord cutter knife (in case the leg gets tangled), a first aid kit and a fully charged phone in a sealer, and you should also have the boat and motor documents with you so that you do not have problems when meeting with the inspectors of the GIMS.
The main principle of safety on the water: it is better to be safe and take extra equipment than to be left alone with a problem in the middle of a reservoir without means of communication and rescue.
Frequently Asked Questions (FAQ)
Which motor is better to choose for a spinning boat: gasoline or electric?
An electric motor is ideal for fishing and quiet fishing, especially when combined with a gasoline motor for crossings; the electric motor is silent, does not scare fish and allows you to position yourself accurately; however, for large reservoirs, a gasoline engine is necessary for rapid transitions.
Do I need a special permit to catch from a boat?
Yes, if the boat has an engine capacity of more than 8 hp (or 15 hp depending on the year of production and the region, now the threshold is often 10 hp) or a length of more than 3 meters, it is subject to registration with the GIMS.
Why don't fish peck from the boat, even though it's pecking from the shore?
The boat creates noise, shadow and vibration that can scare fish away, especially in shallow waters. Try not to make noise, not to trample the bottom of the boat, use the anchor rope of the minimum length and make throws away from the side. Sometimes it helps to change the color of the boat to a more camouflage.
How to keep fish caught in the summer in a boat?
It's best to use a special cage that sinks overboard, but not too deep so the fish don't fall asleep from lack of oxygen. Ice-fridge bags are also effective if you plan to keep your catch fresh for the rest of the day.