In the modern market of small craft model with marking LAK They occupy a special niche, offering a compromise between inflatable analogues and full-fledged aluminum motorboats. Hunter 345 LKAThe boat, which attracts the attention of fishermen and hunters with its robust design and compact size, is designed to operate in waters with a surge of up to 1, making it an ideal choice for calm lakes, reservoirs and river backwaters.
The main material of the case is the aluminum-magnesium alloy AMg5M, which has high corrosion resistance and strength. Unlike all-welded counterparts, this model has a collapsible design, which greatly facilitates transportation and storage. The weight of the kit in disassembled form is only 70 kgThis allows you to transport it in the trunk of a car or on a trailer without the need to issue special permits.
The design of the vessel provides for the presence of a rigid transom, reinforced timber and plywood of high moisture resistance, which provides stability on the water and the ability to install an outboard motor with a capacity of up to 10 hp. loading capacity The model allows you to take on board up to three people and the necessary supply of equipment.
Design features and geometry of the body
Housing geometry Hunter 345 LKA The shape of the bottom and the sides provides good germination on the wave, although the vessel is not designed for the high seas. The onboard cylinders are made of durable floating material that not only keeps the boat afloat in emergency situations, but also serves as an additional safety buffer when mooring.
An important element of the design is sink-boardIt's a mount that's reinforced and protected from mechanical damage, designed to be mounted on a short-devwt motor, and it's mounted in a standard way, making it easier to find compatible models.
- 🚤 Full length3450 mm is the optimal size for two to three fishermen.
- 📏 Full width1500 mm - provides sufficient stability in the parking lot.
- ⚓ Height of board400 mm - comfortable distance to water when landing.
It is worth noting that all welds are made with the observance of technology that prevents the formation of cracks under vibration loads. Aluminum alloy does not require painting, since the oxide film itself protects the metal from oxidation.
⚠️ Attention: Despite the strength of the AMG5 alloy, avoid dragging the boat on rocky bottom or concrete, which can lead to thinning of the bottom and impaired sealing.
Technical specifications and load capacity
When choosing a boat, the key parameters are not only dimensions, but also weight indicators. Hunter 345 It's a great weight-to-payload ratio, and it's a very good passport-to-carry capacity that makes you feel safe on the water, even when you're fully loaded.
The table below shows the main specificationThis will help you decide whether to buy this model for your tasks:
| Parameter | Meaning | Units of measurement |
|---|---|---|
| Overall length | 3.45 | square |
| Overall width | 1.50 | square |
| Own weight | 70 | kilogram |
| Load capacity | 400 | kilogram |
| Passenger capacity | 3 | human |
The capacity specified includes the weight of passengers, engine, fuel and equipment. forbiddenThis reduces the freeboard height and reduces handling.
Materials and build quality
The basis of the boat's durability is in the materials used. aluminum-magnesium alloyThis material is lighter than steel and significantly resistant to corrosion in fresh water, but when used in salt water, it requires regular freshwater rinsing after each exit.
The inflatable tubes are made of high-density reinforced PVC fabric, which is resistant to ultraviolet light, temperature changes and mechanical stress, and the cylinder seams are made by hot welding, which ensures their sealability throughout their life.
To extend the life of PVC tubes, use special protective sprays with a UV filter and keep the boat in the cover in the shade.
The plywood used for floorboards and seats is laminated, it protects the wood from moisture, but it requires inspection for chipping, and if the lacquer layer is damaged, it must be rebuilt to prevent plywood from being dissected.
Assembly and preparation for operation
Assembly process Hunter 345 LKA It takes a little bit of time, but it requires a certain sequence of actions. The initial assembly can take about 20-30 minutes, but with experience, this time is reduced to 10-15 minutes.
For proper assembly, the following actions must be performed:
- 🔧 Unpack the kit and spread the elements on a flat surface.
- 🎈 Inflate the side cylinders to working pressure (indicated in the passport).
- 🪑 Place the seats (banks) in the slots intended for them.
- 🚣 Fix the transom plate and check the reliability of fixation.
⚠️ Attention: Do not use high pressure compressors without a gearbox to pump cylinders. Pumping can cause joints to rupture or deform the valves.
Pay special attention to the fastening transomIt must be placed strictly perpendicular to the diametrical plane of the boat, and any distortions will lead to yawing of the boat on the move and increased fuel consumption.
☑️ Ready to launch
Motor choice and driving performance
For this model, the best choice will be an outboard motor with a capacity of 5 to 10 hp Installation of a more powerful unit does not make sense due to limitations in load capacity and hull geometry. With a 9.9 hp engine, the boat is able to reach speeds of up to 25-30 km / h at full load.
Driving performance Hunter 345 is rated as good for its class, the boat confidently keeps planing with one adult passenger and a minimum fuel supply. As the load increases, the exit to planing is difficult, and the boat goes into displacement mode.
The secret to fuel economy
For fuel economy when switching over long distances, keep engine speeds in the range of 3500-4000 rpm, avoiding maximum operating modes.
It is important to choose the right length of the engine. short leg (S)Installing a long leg motor will result in excessive drag and reduced speed.
Care, storage and transportation
And aluminum-boat It's been in service for years, and it needs to be properly cared for, and after every release, especially in salty or dirty water, the body should be rinsed with fresh water, which will wash away the residues of salt, sand and silt that can cause corrosion or damage the coating.
When transporting on the roof of the car or trailer, it is recommended to use a protective case, which will protect the cylinders from dust, dirt and small stones flying from under the wheels, in winter it is better to store the boat in a assembled, but slightly deflated form, in a dry room with a positive temperature.
- ❄️ Winter storage: Store at temperatures from -30 to +40 degrees Celsius.
- 🧼 Cleanup: Use soft detergents without abrasives.
- 🔩 Conservation: lubricate the metal parts of the motor and fasteners with conservation lubricant.
Check your condition regularly drain-coop Rubber seals can lose their elasticity over time, so replacing them is a normal maintenance procedure.
Proper drying and storage of the boat in the off-season increase its service life by 1.5-2 times, preventing plywood rotting and aging of PVC.
Frequently Asked Questions (FAQ)
Can I install a 15 hp engine on Hunter 345 LKA?
Technically, it is possible to install, but it is not recommended by manufacturers. Exceeding the recommended power can lead to transom overload, reduced stability and imbalance of the boat, which is not safe.
Which type of bottom is better: inflatable or hard (NDND)?
The LCA model already has a hard floor (floorboards), which provides better stability when cruising and fishing with spinning compared to the fully inflatable floor (FBB).
Do I need to register this boat with GIMS?
Under current Russian law, registration is required for small vessels weighing more than 200 kg or with an engine power of more than 8 kW (about 10.8 hp). Since the boat weighs 70 kg, registration is required only when installing a motor power of more than 10.8 hp.
How to properly seal a puncture in a balloon?
Use the kit that comes with the kit. Clean and degrease the puncture site, apply glue to both surfaces, let it dry, then press tightly and roll with roller. Full polymerization takes 24 hours.
What is the difference between the LKA modification and the usual?
Index LAK Usually indicates the presence of a reinforced transo, the possibility of installing the motor and the assembly kit (seat, floorboard), the basic versions can be supplied without these elements or have a simplified design.