Boat. Orca 340 NDLD One of the most popular models for fishing and outdoor activities on the water, this PVC inflatable boat combines the same combination of the two. compactness, reliability and universalityIt's a perfect choice for beginners and experienced water-engineers alike. Orca 340 NDLD has low-pressure bottom (LDB)It provides stability on the wave and comfort when driving.
But before buying it is important to understand the nuances: which motors It is suitable for this model as it is right. operate and storeand which pitfalls In this article, we will analyze in detail everything from technical specifications to feedback from real users.
We'll pay special attention. GIM certification: without it, it's not possible to operate a boat with an engine, and we'll also look at why some owners complain about the power of the boat. leakage And how to avoid it, if you're looking for a reliable boat for fishing, hunting or family trips, this is a guide to making informed choices.
Technical specifications of Orca 340 NDNDM
Model Orca 340 NDLD class small-boat inflatable five-layered PVC thickness 0.9 mmThis is the standard for boats of this type, but some competitors (e.g., the scoops). Flagship 330) offer thicker material - up to 1.2 mm. However, weight and compactness bal Orca They are among the best in the segment.
Basic parameters:
- 📏 Length: 340 cm
- 📐 Width: 155 cm
- ⚖️ Weight: 38 kg (without motor and equipment)
- 👥 Passenger capacity: up to 4 people (maximum load - 600 kg)
- 🚤 Maximum engine power: 15 hp (recommended - 9.9 hp)
- 💧 Bottom type: low-pressure (LDL)
The peculiarity of the model is V-keelIt's a wave-based system that improves handling, but unlike boats with a wave-based system. hard bottom (RIB), Orca 340 NDLD It's less stable at high speeds, and it's important to consider this when you're choosing a motor. Exceeding the recommended power (9.9 hp) can lead to loss of controllability.
Another key point is that configurationIn the basic version, the boat comes with:
- 🛠️ Foot-type pump
- 🧳 PVC remake
- 🔧 Oars (aluminum or plastic, depending on the modification)
- 📦 A bag for transportation
Please note: chute This increases the total cost, so check what comes in before you buy.
Advantages and disadvantages of the model
Like any boat, Orca 340 NDLD It has its pros and cons, and let's look at them in detail so you can see if it's right for your task.
Advantages:
- ✅ Lightness and compactness: Weight 38 kg allows you to carry the boat alone, and when folded, it fits in the trunk of most cars.
- ✅ Universality: It is suitable for fishing, hunting, family walks and even short trips.
- ✅ Price: One of the most accessible in its class (from the 80,000 to 120,000 rubles, depending on the configuration).
- ✅ Easy to repair: PVC material is easily repaired with the help of remplekt.
- ✅ Good load capacity: 600 kg allow you to take on board not only people, but also equipment.
Disadvantages:
- ❌ Low stability at high speeds: Because of NDNDND boat "nose pecks" in a strong wind or wave.
- ❌ Weak stitches: Some owners complain of leaks after 2-3 seasons of operation.
- ❌ No hard bottom: Unlike RIB, comfort on long transitions is lower.
- ❌ The need to buy additional accessories: Tran, seats and attachments are often sold separately.
Important: if you plan to use a boat with an engine more powerful than 9.9 hp, you will need to register with GIMS and obtain the rights to operate a small vessel. These are additional costs and time that are worth considering when buying.
Before the first descent into the water, be sure to check all the seams with a soap solution - this will help identify microcracks that can cause leaks.
Which engine to choose for Orca 340 NDND?
Choosing a motor is one of the most important issues in operation Orca 340 NDLDThe manufacturer indicates maximum power of 15 hpIn practice, it is recommended to limit 9.9bhp. Here's why:
Arguments for the engine 9.9 hp:
- 🔧 Balance of speed and controllability: boat develops 25-30 km/hThat is enough for most tasks.
- 📝 No registration required: Motors up to 10 hp do not require registration in GIMS.
- ⚖️ Economics: Fuel consumption is lower than that of 15-strong analogues.
When should you consider 15 hp?
- 🚤 If you need it. maximum speed (up to 40 km/h).
- 👥 If you're often transported load (4 men + cargo).
- 🌊 If you're operating a boat on large-bore with a strong current.
But remember: 15 hp engine will require registration of the boat in GIMSIt can also impair wave handling, and it can also cause increased power to cause a wave to be more powerful. transmutation and PVC material.
Popular motors for Orca 340 NDLD:
| Motor model | Power (hp) | Type | Approximate price (ruble) | Features |
|---|---|---|---|---|
| Yamaha FMHS 9.9 | 9,9 | Gasoline, four-stroke | 220 000 | Reliable, economical, quiet. |
| Tohatsu MFS 9.8 | 9,8 | Gasoline, four-stroke | 190 000 | Light (26 kg), easy to maintain |
| Honda BF15 | 15 | Gasoline, four-stroke | 280 000 | Requires registration, high traction |
| Minn Kota Endura C2 55 | The equivalent of 1.5 hp. | Electrical. | 85 000 | Perfect for quiet fishing, no noise |
If you choose between petrol and electric motor, consider:
- ⛽ Gasoline engines are more powerful and suitable for long-distance travel, but require fuel and maintenance.
- ⚡ Electric motors are silent and environmentally friendly, but limited in range (depending on the capacity of the battery).
For most tasks (fishing, cruising) the engine is optimal 9.9 hp - it provides sufficient speed without unnecessary hassle with registration.
GIMS registration: is it necessary for Orca 340 NDNDM?
One of the most common questions owners ask is Do I need to register a boat with GIMS? The answer depends on motor-power and pond-like:
When registration is not required:
- 🛶 If you use a boat motorless motorized 10 hp.
- 🏞️ If you swim on water-hole (Ponds, small lakes without navigation)
When registration is mandatory:
- 🚤 If the engine 10bhp and higher (Even 10.1 HP already requires registration!)
- 🚢 If you swim on navigable rivers, lakes or sea waters.
The registration process includes:
- Submission of documents to GIMS (passport, TIN, receipt of payment of the fee).
- Passing a technical inspection of the boat.
- Obtaining a boat registration certificate and license plate.
The cost of registration in 2026 is about 5,000 to 8,000 rubles (depending on the region) will also be required insurance (from 2,000 rubles per year).
⚠️ Attention: Operation of a boat with an engine of more than 10 hp without registration entails fine of 2,000 rubles In addition, in case of accidents on the water, the insurance company may refuse to pay if the boat is not registered.
If you are not sure whether registration is necessary in your case, please check the information in the local office of the GIMS or on the website. gims.gov.ru.
Tips for operating and caring for the boat
And Orca 340 NDLD have served for many years, several rules must be followed leaving and storageThe main problems for owners arise because of misuseNot because of a factory marriage.
Checklist before launching:
☑️ Preparation of the boat for the water
Basic rules of care:
- 🧼 Wash after each use: Salt or dirty water destroys PVC. Use a soft sponge and fresh water.
- 🌡️ Storage: You can't keep a boat in the sun or in a damp room. +5…+20°C.
- 🔧 Repair: When you have a puncture, use it. glue-and-patchDon't put off repairs!
- ⛽ Fuel: If you use a gasoline engine, fill the fuel not lower AI-92 And watch the butter.
What can't you do?
- 🔥 Smoking next to the boat: PVC flammable easily.
- 🐕 Take animals with claws on board: They can damage the material.
- ❄️ Operate at temperatures below -5°C: PVC is becoming fragile.
⚠️ Attention: If the boat has not been used for a long time, check before launching. leakiness And to do that, inflate the boat and put a soap solution on the seams, and if bubbles come up, you need repairs.
Average service life Orca 340 NDLD With proper care, 7-10 yearsBut if you ignore the rules, you can have serious problems in 2-3 seasons.
What if the boat started to leak air?
If you find a leak, identify its source:
1. Inflate the boat and apply soap solution to suspicious places.
2 If bubbles appear on the seam, a gluing is required.
3. If a hole in the main canvas - use a patch from the remplekt.
4 For major damages (more than 5 cm), it is better to contact the service.
Do not use superglue or tape - they do not hold on PVC!
Comparison of Orca 340 NDNDM with analogues
To understand how Orca 340 NDLD Compared to competitors, consider several popular models in the same price range.
| Model | Length (cm) | Max engine power (hp) | PVC thickness (mm) | Price (rupe) | Advantages | Deficiencies |
|---|---|---|---|---|---|---|
| Orca 340 NDLD | 340 | 15 | 0,9 | 80 000–120 000 | Light, compact, good load capacity | Thin PVC, weak seams |
| Flagship 330 NDLD | 330 | 15 | 1,2 | 95 000–130 000 | More durable PVC, reliable seams | Heavier (45 kg), more expensive |
| Corvette 330 NDLD | 330 | 10 | 1,0 | 75 000–110 000 | Cheap, easy to repair. | Low maximum power of the motor |
| Bark 340 NDLD | 340 | 20 | 1,1 | 120 000–160 000 | High load capacity, strong PVC | Honey, requires registration with the engine >10 hp. |
As you can see from the table, Orca 340 NDLD win price and weightbut loses in PVC strengthIf you need a boat for low-use (for example, summer fishing trips) Orca - It's a great choice. heavy-duty (Daily exits, difficult conditions), it is better to consider Flagship 330 or Bark 340.
Another important point. guaranteeUgh. Orca it is 2 years... whereas Flagship. — 3 yearsooh Bark — 5 yearsThis is also worth considering when choosing.
Owner reviews: pros and cons from real experience
To form an objective opinion on Orca 340 NDLDWe looked at the feedback from the owners on the forums and on social media, and here's what they say:
Positive feedback:
- 👍"I bought a year ago, no problem in a season. It's easy to assemble, it can accommodate two with gear. The 9.9 hp engine pulls perfectly - it goes into planing without problems.(Ivan, Moscow)
- 👍"For fishing on the lake, it's ideal. It's easy to transport, it's not enough space. The only thing is that I had to buy comfortable seats.“ (Alexey, St. Petersburg)
- 👍"Cheap, but reliable, not a single puncture in two seasons, even though I swam down rivers with driftwood.(Dmitriy, Novosibirsk)
Negative reviews:
- 👎"After the third exit, I found a leak on the seam, and I had to take it to the service, and they glued it for 3,000 rubles.(Sergei, Yekaterinburg)
- 👎"It's a nose-feeding wave if the engine's weak, 15 hp is better, but then you need to register.(Oleg, Krasnodar)
- 👎"It's thin -- it scratched on a rock, had to be glued, and next time I'll take a 1.1 mm model.(Anton, Kazan)
It is clear from the reviews that the main claims relate to suture-quality and PVCBut most of the owners are happy with the boat, especially considering it. priceMany people recommend pluck and spare-fitting in case of puncture.
Users also advise:
- 🔹 Don't skimp on the pump: Cheap models break down quickly, it's better to take an electric one.
- 🔹 Keep the boat in a case: It protects against dust and UV rays.
- 🔹 Check the pressure before each exit: The pumped cylinders wear out faster.
FAQ: Frequent questions about Orca 340 NDNDT
❓ Can I install a 20 hp engine on the Orca 340 NDNDND?
No, the manufacturer says maximum power of 15 hp Installation of a more powerful motor will lead to:
- Loss of control at high speeds.
- Accelerated wear of trans and PVC.
- Problems with registration in GIMS (requires the conversion of the boat).
If you want a more powerful engine, consider the models with hard bottom (RIB) or larger boats (e.g., larger ones) Orca 380).
❓ Which pump is better to choose for pumping?
For Orca 340 NDLD It'll do.
- Scissor pump: It is complete, but requires physical effort.
- Electric pump: More convenient, but more expensive (from 5 000 rubles). Bravo 12V, Intex 68609.
- Manual pump with gauge: allows you to control pressure (optimally - 0.2-0.25 kg / cm2).
Tip: Don't pump balloons into your eye. Excess pressure can cause the joints to rupture.
❓ How long does it take to assemble the boat?
With experience in assembly Orca 340 NDLD borrower 15-20 minutesFor beginners, it can take up to 40 minutes.
- The boat is placed on a flat surface.
- Pump connection and pumping of cylinders.
- Installation of the transom (if it is removable).
- Seat fastening and checking the tightness.
To speed up the process, keep the boat half-assembled (e.g., with a transom already glued).
❓ Can I use a boat in the winter?
Technically. Orca 340 NDLD It can be used in winter, but there are risks:
- PVC becomes brittle below -5°C.
- Ice can damage material on contact.
- The engine can start badly in the cold.
If you decide to swim in the winter:
- Use it. PVC-lubricant.
- Avoid. ice-drift.
- After we landed dry the boat thoroughly.
❓ Where is it better to buy Orca 340 NDND: in the store or used?
Each option has pros and cons:
| Criteria | Shop-in shopping | Buying from hand |
|---|---|---|
| Price. | Expensive, but with a guarantee. | Cheaper (20-30%) |
| Status. | New, free of defects | It may be worn out (check the stitches!) |
| Documents | Check, 2-year warranty | Often without papers |
| Completement | Full (by default) | There may be no pump, paddles, bag |
Recommended: If the budget allows, take new boat in the official storeIf you don't have enough money, look for it. Avito or julebut Be sure to check for leakiness (Inflate and leave for 12 hours - if not deflated, you can take it).