Choosing the first boat for fishing or cruising on a pond is always associated with the analysis of many factors, among which the dimensions, weight and cost come to the fore. aluminum-boat For many years, the Master plant in St. Petersburg has been one of the most popular solutions for lovers of calm water. Romance 1The silk is a compact and reliable option that is ideal for operation on small rivers and lakes.
However, when choosing a particular instance or preparing for the season, it is important to study in detail the data-sheet figures and the real capabilities of the vessel. Technical specifications This model allows it to compete with modern PVC counterparts while maintaining the undeniable advantages of metal. In this review, we will discuss all the nuances of the design in detail so that you can make an informed decision.
General information about the model and design features
The basis of reliability of this craft is the use of aviation aluminum alloy, which provides high strength at a relatively low weight. The hull design is made using riveted technology, which eliminates the need for welding and makes the seams sealed and resistant to vibration loads. aluminum-alloy This allows the boat to resist corrosion for years without the need for complex maintenance.
The bottom shape is designed to be very stable even when you're moving passengers inside the cockpit, and the flat bottom makes it easier to pull ashore, but it requires precision when you're driving at high speeds. Romance 1 This will be a great choice thanks to the ergonomics.
Importantly, despite being compact, engineers have managed to maintain enough internal volume to accommodate two people and the necessary equipment. The boards are sufficiently tall, which improves safety and prevents splashes from getting in at a small wave.
Overall dimensions and weight parameters
Compactness is the hallmark of this modification, making it ideal for transport on the roof of a passenger car, with a length of only 2.9 meters on the deck, and a width at its widest part of 1.35 meters. dimensions They allow you to easily maneuver in narrow ducts and overgrown reed bays, where larger boats simply will not pass.
An empty boat weighs no more than 40 kilograms, which allows one adult to easily load it into the back of a pickup truck or even drag it to the water, a critical parameter for those who do not have a trailer or the ability to use lifting equipment.
The table below provides the exact technical data that should be relied on when planning transportation:
| Parameter | Meaning | Unit of measurement |
|---|---|---|
| Maximum length | 2.90 | square |
| maximum width | 1.35 | square |
| Height of board | 0.35 | square |
| Own weight | 38-40 | kilogram |
Capacity and passenger capacity
Despite its modest size, the hull has an impressive margin of buoyancy. loading capacity The model allows you to safely accommodate two people of medium size, which makes it a great option for a duet of fishermen or for a parent with a child.
However, it is important to note that weight distribution is key: at maximum loading, draught increases and the free side decreases, so you should not neglect safety rules.
⚠️ Warning: Exceeding the permissible load can lead to a critical decrease in the height of the board above water and loss of stability, especially when going out into open water or in windy weather.
The capacity is also limited not only by weight, but also by the free space for the legs, the most comfortable on board feel two people sitting on transom banks, a third passenger can only accommodate with a minimum amount of equipment and only calm.
Engine power and speed performance
The design of the transom allows you to install suspended boat-engine This limitation is dictated by the strength of the transom board and the overall architecture of the body, and installing a more powerful unit is not only dangerous, but also impractical from the point of view of handling.
With a 2-3 hp engine, the vessel reaches a speed of about 10-12 km / h, which is a comfortable mode for moving between fishing points. When installing a 5-horsepower engine, the speed can rise to 18-20 km / h, but you should walk at such speeds on a flat bottom with extreme caution.
The transom height is standard, allowing you to mount motors with a short leg. To achieve maximum efficiency, it is recommended to use screws with reduced pitch, which are better pulled at low revs.
Operational nuances with motor
When operating with the engine at the power limit (5 hp), it is recommended not to make sharp steering turns, since the inertia of the body can lead to differtation and swamping of the spray through the side.
Manufacture materials and durability
The main material is an aluminum-magnesium alloy, which is widely used in shipbuilding because of its lightness and resistance to freshwater. The surface of the metal often has a natural oxide coating that protects against oxidation. aluminum It does not rust, although it can oxidize upon contact with aggressive environments.
The sheathing sheets are connected to the lock and then sealed, and this technology provides high reliability and maintainability, and even in the event of damage (for example, impact on a pitfall), you can restore the integrity of the shell yourself with rivets.
To extend the service life, it is recommended to wash the case with fresh water after each operation, especially if you have been fishing on water bodies with high mineralization or at the mouth of rivers, this will help to maintain the aesthetic appearance and technical properties of the metal.
To protect the bottom from abrasion with frequent pulling on the rocky shore, you can stick special protective tapes or use a removable keel of rubber.
Package and additional options
Basic equipment usually includes the vessel itself, removable seats (banks) and power-ups for oars. Oars are usually sold separately or included in extended sets. The owner can independently equip the boat with anchor rings, rod holders and soft jars.
Many fishermen have wooden jack-up pads on board, which protect the metal from impacts on the piers or on the sides of other boats, and the installation of transom wheels is also popular, which makes it much easier to move along the shore.
The interior space allows you to place a gearbox under the nose bank, which makes room for your feet, which makes fishing more comfortable and organized.
☑️ Check before buying a used boat
Comparison with analogues and final conclusions
In his class. Romance 1 The main competitors are the Kazanka (mini-format) or similar-sized PVC inflatable boats, the main advantage over PVC is the inability to pierce the board against a knot or a driftwood, and stability on the water.
Compared to the larger versions, this model benefits in mobility and the possibility of transport without a trailer, but for going to large water or long trips with a lot of cargo, it is better to consider more roomy options.
⚠️ Warning: When buying a used specimen, be sure to check the condition of rivet joints. Weakening rivets can lead to depressurization of the seams and rapid water recruitment.
To sum up, it is a reliable, time-tested solution for relaxing fishing and relaxation, and its simplicity of design ensures that the boat will last decades with minimal maintenance.
The Romantic 1 boat is the perfect balance between weight, strength and cost, suitable for anglers who value mobility and ease of maintenance.
Frequently Asked Questions (FAQ)
Is it possible to go on a boat Romantic 1 to Ladoga or Onega Lake?
The access to such large bodies of water is possible only in calm weather and in close proximity to the shore. Flat bottom and small sides make the vessel vulnerable to even small waves, so it is recommended to stay in protected bays.
What is the maximum weight of the motor can be put on a transom?
The manufacturer recommends the use of motors up to 5 hp Installation of a more powerful engine can lead to deformation of the transom and loss of controllability of the vessel.
Should I paint an aluminum boat?
Painting is not a mandatory procedure for corrosion protection, as aluminum itself forms a protective oxide film, and boats are often painted for aesthetics or camouflage, using special soils for non-ferrous metals.
Does the boat fit in the trunk of the sedan?
With a length of 2.9 meters, the boat will not fit in the trunk of a standard sedan entirely, but it can easily be placed on the roof of the car (subject to the rules of overhang) or in the back of a pickup truck and wagon with folded seats.