Many anglers mistakenly believe that the traditional mug fishing is possible only with a boat, whether it is a PVC boat or a boat. However, the absence of a boat is not a reason to abandon this killer method of preying predators, especially pike. Experienced masters of fishing have long developed effective techniques that allow the use of floating rods from shore, wiring or even fording, obtaining results that often exceed traditional riding.
The essence of the method is to use current, wind or manual wiring to move gear around the water area. Shore mug fishing It requires careful site preparation and understanding of the fluid dynamics of the reservoir, but instead it gives you the opportunity to catch inaccessible areas from the boat near the reed or under the overhanging canopy of trees, it is active fishing, where success depends not on the motor, but on your ability to read the pond.
In this article, we will take a look at how to turn a boat from a disadvantage to an advantage, and learn about specific installations that keep the gear from getting confused, and how to legally and safely fish without violating the rules of GIMS. Fixed installation The circles with a link to the shore are an art available to anyone who is ready to show ingenuity.
Selection and preparation of shore fishing circles
The first thing to decide on is the type of mugs that are used, and for fishing without a boat, the classic foam plates are the least suitable because of the difficulty of fixing and controlling them from the shore. denim Or modified models that can be rigidly anchored or tethered, and some anglers have been successful in using flippers, but they require perfectly flat bottoms and no hooks.
And the most important thing is anchoring, and unlike boat fishing, where the circle is drifting, here we often deal with the problem of the problem of the problem. statically The circle must be stable, not overturned by the jerks of bait and wind, and the best choice is a model made of dense foam with a wide groove for winding the line, which prevents crossovers in high winds.
⚠️ Attention! Don't use too light mugs when fishing on the current. A strong flow of water can overturn the tackle or drag it along with the anchor, leading to loss of equipment and poaching.
Pay special attention to the color of the tackle, although the classics of the genre are the white top and the red bottom, in the conditions of clear water and fishing near the shore, a predator can become alert. The use of camouflage coloring circles or neutral green color significantly increases the number of bites sold. This is a subtle detail that is often ignored by beginners, but critical for performance.
Equipment: line, loader and hook
The right tooling is the balance between strength and stealth. For catching pike on mugs without a boat, the most common use is a monophilic fishing line with a diameter of 0.30 to 0.45 mm. Writer cord is not recommended for use, since it is strongly sailing on the flow and can injure the hands when catching, and also noticeable to fish. The length of the fishing line should be equal to the depth at the fishing site plus 2-3 meters of stock, but no more to avoid unnecessary hings at the bottom.
The groove is not only an anchor for the bait, but also a stabilizer, and depending on the strength of the current, the weight can vary from 10 to 40 grams. olive Or a sliding loader that doesn't prevent the predator from swallowing the bait, and the hook is chosen depending on the size of the bait: a single hook 4-6 is suitable for a small carpenter, and a large caracher is better to use a double or tee of the appropriate size.
Secret technique of mounting a sliding loader
To make the bait more active and the load does not interfere with the bite, use a locking knot or a bead above the loader, which will allow the fishing line to slide freely, and the pike will not feel the resistance of weight in the first attack.
The table below shows the recommended equipment parameters for different fishing conditions:
| Fishing conditions | Line diameter (mm) | Weight of the loader (g) | Type of hook |
|---|---|---|---|
| Standing water (lake) | 0.30 - 0.35 | 10 - 15 | Single or double |
| Weak current (river) | 0.35 - 0.40 | 20 - 30 | Double. |
| Strong current/wind | 0.40 - 0.45 | 30 - 50 | Tee or offset |
| Boat fishing | 0.45 - 0.50 | 25 - 35 | Single (less than hooks) |
Tactics of installing mugs from the shore
The most common method is to place fan circles or tracks parallel to the shore, where you choose a promising area, such as the border of reed and clear water, and place the gear 3-5 meters apart, each circle is attached to a peg hammered into the shore or to a heavy snag/stone on the shore with a strong cord, the length of the fishing line is adjusted so that the bait is in the water or at the bottom, depending on the activity of the pike.
The second option is wiring, and the fisherman wads or crosses the bridge and starts a circle upstream, allowing him to swim along the shore brow, and when the gear passes a perspective point, they stop it and lock it in a temporary anchor (e.g., tied to a bush), and after checking the site, they remove it and move to the next point, which requires physical training, but allows you to "scour" a large section of the river.
When you install it, you need to take into account the wind direction. If it's blowing from the shore, the mugs will be demolished to the depth, which is often a plus. If the wind is blowing into the shore, the gear can get tangled in the coastal grass, so you need to put them upstream or use longer vacations. Tension control The main tether is critically important: it should not be pulled like a string, otherwise the jerk of the fish will break the thin cord or pull out the pegs.
The choice of the livelier and its behavior
For shore fishing, where the replacement of bait can be difficult by distance or conditions (for example, a steeper), you need to choose the most hardy fish. Carp is the undisputed leader, able to live on a hook for days. Pescar is more active and visible to the predator, but quickly falls asleep. Rotan is good in places where he lives, but the pike sometimes takes it reluctantly because of hard skin.
The size of the bait dictates the size of the potential prey. To catch "laces" and medium pike (1-3 kg) is enough fish length of 6-9 cm If the target is a trophy pike, then the bait must be appropriate, 10-15 cm It is important to plant the fish correctly: a puncture under the dorsal fin (carefully so as not to touch the spine) allows it to maintain mobility for a long time. Puncture through the lip or gills is used less often, as it tires the fish faster.
To keep the bait active longer, before planting, place it in a container with water from a pond and add a little oxygen (if there is an aerator) or simply change the water more often in the canna.
And the seasons are not to be ignored. In autumn, before ice, the pike prefers larger and fatter prey, so small vein can work worse. In summer, in the heat, the fish is sluggish, and here the mobility of the nozzle is more important than its size. Experiments with species On one pond often give a better result than the persistent use of only carp.
The process of catching and safety
When you see a circle inverted or you feel a jerk on the leash, you need to act quickly, but without fuss. When you approach the tackle, do not pull the line immediately. Give the predator 2-3 minutes to properly swallow the bait and turn it head-first in the mouth. This is especially true for the pike. A sharp cut can tear the hook from the hard mouth or, conversely, break weak lips.
Hand-drawn fishing is done, the line is chosen smoothly, feeling the weight and resistance of the fish. If you get a large specimen, do not drag it to the shore - you can break the line against a shell or a driftwood. Go into the water (if equipment allows) or use it. bagoric Always carry a yawner and extractor with you to safely remove the hook and not injure the fish or yourself.
⚠️ Attention! Never wrap the line around your finger or hand when you're fishing for a large pike. The pull of a trophy can cause severe cuts with the line or even loss of the phalanx of your finger.
Safety in the water is a priority. Fording requires rubber boots or a wandering suit. The bottom can be slippery, and the grass can have hidden pits. Always check the depth before you step. If you catch from a precipitous shore, make sure the ground is stable so that you don't fall into the water with the tackle.
Legal aspects and rules of GIMS
Fishing mugs without a boat often falls into the grey zone of fishing regulations, so it is important to know the laws of your region. In most cases, mugs are equivalent to vents, and their number is limited (usually 5-10 pieces per person). However, if the circle is large in diameter and used as a floating tackle without tether to shore, inspectors may consider this as fishing with an unregistered boat, which is a violation.
The key is availability. certificate You can also have the right to operate a small vessel and register the vessel itself, if any. boatlessThe main rule is that the tackle must be tied to the shore or be in the direct visual control of the angler, who is on solid ground or standing in the water.
☑️ Check before leaving for the water body
There are also restrictions on fishing periods: during spawning bans, the use of any mugs and foals is generally completely prohibited, violating these rules can not only confiscate gear, but also serious fines. Always check the current fishing rules for your pool before leaving.
Frequent Mistakes of Beginner Fishers
One of the biggest mistakes is to use too rough equipment to be sure. Pike, of course, fish are not the most careful, but in clear water, a thick line and a bright circle can reduce all efforts to zero. The second mistake is to install tackles in dead zones where there is no movement of water or passage of fish. The circle must stand in the path of migration or at the ambush of a predator.
Many people forget to check the bait. A fish that falls asleep on a hook does not interest the predator, and sometimes it scares him away. If you can't visit the tackle often, you better use a tenacious crucian carp and put mugs for less time. Ignoring the weather is also fatal: a storm can confuse all your gear into one big ball.
The key to success is mobility and observation, so don't be lazy to rearrange the mugs if you don't bite for 2-3 hours, and watch the behavior of the babe closely.
FAQ: Frequently asked questions
Can I go fishing in winter without a boat?
Winter mug fishing is only possible on ice (suppliers), but classic swimming mugs in the hole are not used because of freezing. However, there are winter modifications of the porches that are mounted on the ice next to the hole, fishing from shore in winter on open water is dangerous and usually prohibited by safety regulations.
Which is better for a river with a strong current?
The best way to approach a river is a sander, a fir tree, or a sticker, which is elongated and is used to the flow of water, and when it is in a strong current, it quickly loses its strength and becomes sluggish, which reduces its attractiveness to the predator.
Do I need to register my sleeves in GIMS?
The mugs themselves are not subject to registration as a gear, but if you use an inflatable to install them (even if it is just an inflatable mattress), it may be subject to the registration rules for small boats depending on the load capacity and engine power (if any).
How far from the coast can you let the circle go?
The legal distance is often not strictly regulated, but the gear should be in your visual control area, and in practice, when fishing from the shore, mugs are released to the length of the rod or a little further, so that you can easily reach the tackle with a lift or a bumper.