Summer is often called a difficult period for a spinner, when the predator becomes passive and hides in deep holes. ratlin We have bladeless wobblers that can do wonders in catching deep waters, and fishing from a boat gives you access to places you can't get from the shore, and using vibes allows you to capture the bottom layer with maximum efficiency.
Unlike jig baits, ratlin creates powerful vibrations that the fish feels with the sideline at a great distance, which is critical when the water warms up and becomes transparent. A well-chosen model and competent wiring can turn bezkleevye into a real jock, especially if it is a pike, a berche or a large pike.
But success depends not only on having bait in your arsenal, but also on understanding the physics of how it works in the water column. It is important to consider sonar, bottom relief and temperature anomalies. In this article, we will examine all the nuances of summer fishing for vibas from a swimming tool so that you can maximize your potential on a pond.
Choosing the Best Ratlin for Summer Fishing
The first thing to start assembling an arsenal is the caliber and weight of the bait. In summer, the predator often stands at depths of 4 to 10 meters, so lightweight models weighing up to 7 grams may not be useful. ratlinThe optimal weight often varies between 10-14 grams, allowing you to make long throws and confidently feel the bait.
The second critical parameter is noise level, and the ratlins are divided into noisy (with metal balls) and quiet (with or without plastic balls), and in clear summer water, excessive ringing can scare off cautious fish. Silent models Or the vibes with a quiet hum work much better on the passive predator without causing him suspicion.
⚠️ Warning: Do not use too large ratchets (more than 90 mm) in the heat of July, when the pike or pike has a sluggish appetite.
The color scheme also plays a role, albeit secondary to the game. acidicIn clear water and shallow water, you should switch to natural silver or translucent colors with sequins.
For summer fishing, keep phosphorus-coated ratchins in stock, and they're effective not only at night, but also at very high depths where sunlight can barely penetrate.
Spinning equipment and tackle requirements
Ratlin fishing from a boat dictates its requirements for tackle. Because wiring is often done in plumb or short ejection, the range of the rod fades into the background, giving way to sensitivity and power. You need a form that allows you to clearly feel the touch of the bottom and the light rods. The optical test of the rod should cover the weight of the baits used with a margin of 20-30%.
The coil must have good traction and reliable friction, because a summer predator, especially a trophy pike, can cause serious resistance. The gear ratio is better to choose the middle or speed ratio, so you can quickly choose the slack of the cord when wiring. Monophile fishing line here is not suitable because of its extensibility - only thread-cord diameter 0.12-0.14 mm according to the Japanese classification.
The fittings are also subject to increased requirements. Ratlin is a bait that creates high-frequency vibrations that quickly unbend low-quality winding rings. Immediately after purchase, it is recommended to replace regular hooks with better ones, for example, from Owner or Decoyand also strengthen the mounting points.
- 🎣 Steering: height 2.10-2,400 m, test 10-40 g, building Fast or Extra Fast.
- 🧵 Cord: wicker 4 or 8 veins, bright color to control the wiring horizon.
- 🔗 Furniture: reinforced winding rings and vertebrae of size No. 2 or No. 3.
- 🎣 Hooks: tees with a long forearm and a sharp sting, often with plumage.
Tactics of finding fish from a boat
Summer fishing from a boat is impossible without a sonar. Rathlins are designed to catch a particular horizon, and blindly (at random) to look for fish in huge waters is a waste of time. Your task is to find changes in depths, eyebrows, dumps in the channel or local hills (navels). Sudak in the summer often stands at the exits of pits, and pike hides in the thickets of grass or in flooded driftwood.
Once you find a perspective point, you need to anchor or anchor properly, and the boat needs to stand with its nose to the wind or the current, so that the casting and wiring are carried out in the direction of the water, and this will ensure the natural behavior of the bait and keep it in the catch zone for as long as possible, you can drift into the ratlins, but only in very low winds.
It's important to capture not only the bottom, but also the middle horizons. In summer, fish can climb into the flores behind the feed base. If the sonar shows a cluster of fish 3-5 meters from the bottom, it makes sense to try to ratlin in this layer, using stepwiring with long pauses.
☑️ Finding a fishing spot
Wiring technique: from classics to micromovements
The most popular ratlin wiring is the classic step, and after the bait is dropped, it is allowed to sink to the bottom, then it takes 2-3 turns of the coil and pauses. During the pause, the ratlin plans, vibrating and attracting the predator. The duration of the pause depends on the activity of the fish: the more passive the peck, the longer the stop should be.
But in the summer, there's a lot of wiring, and it's a lot of jig and pilking, and it's a short, sharp rod toss, and it's a bit of a swing, and it can be anywhere from 10 to 50 cm, and it's an aggressive game that provokes pike and bass to attack, and it's important to watch the cord tension, so you don't miss the biting that happens when you fall.
For a passive pike, what's called a "shaking" or "dribbling" is applied, and the tip of the rod descends to the water, and with small, frequent movements of the hand, Ratlin is made to tremble, and at that moment, he vibrates finely in place, imitating a wounded fish, which requires high concentration and sensitive tackle.
| Type of wiring | What fish? | specifications of movements | horizon |
|---|---|---|---|
| Classic step | Sudak, Bersh. | 2-3 turns, pause | Done |
| Aggressive twittering | Pike, Perch. | Snapshots, pauses. | Medium/bottom |
| Uniform | Jerech, Chekhon | Monotonic winding | Upper/Mediternary |
| Dribbling (shaking) | Passive prick | A fine vibration in place | Bottom |
⚠️ Attention: In the current, the flow force can rip the ratlin into a tailspin. If the bait stops vibrating and just spins, slow down the winding speed or replace the model with a more stable one.
Seasonal features: June, July, August
Every summer month dictates its own fishing tactics. In June, right after spawning, the predator actively recuperates, during which larger, noisier ratchets are working, and the fish reacts to aggressive wiring, and the pike and perch can go to relatively shallow areas adjacent to the depth.
July is the thermocline water dissection and maximum warming. The predator goes to the depths where the water is colder and oxygen-rich. Heavy, sinking ratlins come into play. The cliff becomes capricious, so you have to experiment with flowers and switch to the color. noiseless modification.
In August, with the first signs of cooling and increasing activity of small fish, the pre-autumn booze begins. Ratlins are again effective on brows and dumps. Pike begins to become interested in larger objects, so the size of the bait can be increased to 70-80 mm.
The secret of the dead zone
If the ratlin is constantly wiring the bottom, don't be in a hurry to change the place. Try to make a "screaming" wiring when the bait slightly touches the ground, raising a cloud of mud, which often provokes the perch to attack.
Frequent mistakes in fishing for vibas
One of the biggest mistakes is to use too rough gear, because a thick cord sails along the current, takes off the easy bait, makes the wiring unnatural, and a stiff stick-cord-hook can lead to frequent descents because the fish feels unnatural resistance.
The second common blunder is monotony, and many anglers find one wiring and keep using it even when the peck is gone, and the predator quickly gets used to the monotony, and you have to constantly change the speed, the horizon and the nature of the game to provoke the fish to attack.
Ignoring weather is also unacceptable. If there is a sharp change in atmospheric pressure or a strong northern wind, the sticks can disappear completely, and at such moments it is useless to wave spinning for hours - it is better to change the place or tactics, switching to a more delicate game.
- ❌ Use of monolescence instead of wicker (loss of sensitivity).
- ❌ Ignoring the hook check after every fishing trip.
- ❌ They only catch at the bottom, ignoring the upper horizons.
- ❌ No variability in the speed of the wiring.
The main secret of success in the summer is the constant search for an active horizon and the ability to "read" the bottom by tactile sensations through the rod form.
FAQ: Answers to popular questions
Which Ratlin is better to choose a beginner for summer fishing?
To start with, you'd better use a 60-70 mm universal model weighing about 10-12 grams with a neutral or low-noise rattle, which forgives wiring errors and works on most predators.
Can you catch ratlins in the grass?
Yes, but only if you use top-water style modifications or if you use conventional vibas with unlockables, a classic ratlin with tees will instantly collect all the grass on the bottom.
Why did Ratlin stop working?
There are a number of reasons: the hooks are blunt, the winding rings are straightened (the game has changed), or the fish just got used to the frequency of the vibration. Try changing the color, size or type of wiring.
Do I need a leash when fishing for ratlins?
If the target is a pike, a thin fluorocarbon or titanium leash is mandatory, and for perch and perch you can catch without a leash, but the risk of a cut in the teeth always remains.
Keep the ratchets in separate boxes, and if the vibes are in the heap, they can get scratched and the hooks get tangled, which will ruin the balancing and bait game.