Capturing a fang predator from a boat opens up completely different horizons for the fisherman, which are not available in coastal fishing. Sudak is a schooling fish, but extremely careful, and access to deep brows, flooded snags and bed pits is a key factor in success. electronic assistant to search for fish parking, which turns fishing from the lottery into a systematic process of extracting trophies.
But the boats have their own stringent equipment and tactics, and the spring and fall jolts are at different depths, and mobility becomes your biggest asset. Unlike the shoreshore, you can instantly change your fishing horizon or your throwing point by responding to readings. sonar It requires not only knowledge of predator behavior, but also competent technical training of gear.
In this article, we will discuss in detail all aspects of angling a perch from a swimming tool, from choosing the optimal anchor to the nuances of wiring on a strong current. You will learn why the classic jig often loses to specialized techniques when catching from drift, and how to adjust the friction correctly so as not to lose the trophy in the drifts.
Choosing a boat and preparing for the water
For a comfortable and efficient fishing of a pike, the size and type of boat are critical, and the optimal choice is considered to be inflatable structures made of dense PVC with a length of 3.2 to 3.8 meters. loading capacity to accommodate two anglers, anchor equipment and a stock of gear, while maintaining good handling.
Metal boats, or "Kazanki", are also popular, especially on large reservoirs with high waves. They are more resistant to punctures on sharp shells or driftwood, but create significantly more noise when in contact with water or hitting tackles on board. Sudak has excellent hearing, and excess vibration of the hull can scare fish away from a perspective point.
⚠️ Warning: When fishing in enclosed areas, always have an emergency anchor or a detachment on hand. Getting stuck at a single anchor above a douche pack is the worst-case scenario, which can end in the loss of a boat or expensive equipment.
The most important element of training is the anchoring system, the use of one anchor from the nose is permissible only when fishing in calm waters. stretcher Or use anchor cargo at the stern so that the boat does not spin in the wind and current, allowing you to make accurate throws.
Equipment of the boat: sonar and navigation
Modern pike fishing is unthinkable without a sonar. It's not just a depth measuring device, it's the primary search tool. To work efficiently from the side, you need a device with a scanning frequency of at least 200 kHz and a narrow beam to clearly see the structure of the bottom and individual schools of fish. DownScan or SideScan They give a picture close to the photographic one, allowing you to distinguish between snags and stones.
Navigation is also important, especially when fishing in unfamiliar water bodies. GPS tracker allows you to break (save) catch points ("points") and return to them when weather conditions change or the time of day. Sudak often stands on very local areas of the bottom — bumps or dumps only a few meters in size, and without a navigator to find them again is almost impossible.
The sounder sensor attachment must be designed to minimize interference from the engine and air bubbles. Track boats often use special brackets to quickly remove the sensor. It is important to monitor the purity of the emitter: algae fouling or oil plaque drastically reduce the quality of the image on the screen.
| Type of equipment | Recommended specifications | Impact on outcome |
|---|---|---|
| Echoer (2D) | Power > 300 W, frequency 200 kHz | Clear separation of fish and bottom |
| GPS-navigator | Precision < 3 meters, support for maps | Return to catch points |
| Anchor system | Two anchors (main + aft) | Stable position in the wind |
| Trolling engine | Thrust 30-50 lbs, the presence of sonar in the kit | Silent maneuvering over a point |
Secrets of echo sounder setup
Many anglers don't know that sensitivity needs to be reduced when fishing in high currents or winds. High sensitivity creates a lot of noise on the screen, hiding real fish. The optimal sensitivity is 70-80% to see only dense objects.
Spinning kit for fishing from a boat
Boat gear is very different from shore gear, and there's no need for 80-100 meters of long-distance casting, because you can put the boat directly above the brow, so you can choose shorter rods, the optimal height is 1.90 to 2.10 meters, and these "breaths" allow you to confidently fish vertically without touching the sides of the boat.
The rod test is selected for fishing conditions. For medium depths (3-6 meters) and bait scales up to 20 grams, the test will suit the test. 5-25gIf you plan to fish on deep-sea brows of rivers with strong currents, where the weight of the jig head reaches 40-60 grams, a more powerful form with a dough is needed. 20-60 The build is preferred to fast or extra fast for clear fixation of careful bites.
The coil must be reliable and have good traction. The 2500-3000 size according to the Shimano classification is the gold standard. Pay special attention to the quality of the line and the friction. When fishing in driftwood, where the perch often hides, the friction should be tuned tight enough to make a short, angry cut, but fire at a dead hook, saving the tackle.
- 🎣 The rod: 1.90m - 2.10m, test 10-40g, build Fast.
- 🧵 Cord: Widden, 4 or 8-dwelling, diameter #0.6 - #0.8 according to Japanese classification (PE).
- 🔗 Furniture: American type fastener without a vertebra (for better vibration transfer) or with a miniature vertebra.
- 👓 Polarization glasses: A mandatory element for controlling wiring and protecting the eyes from glare.
⚠️ Warning: Never use a monophilic fishing line as the main one when fishing from a boat. The stretch of the monophile at depths of more than 5 meters will make cutting the pike with its bony mouth impossible, and you will just pull the bait from the mouth of the fish.
The wicker cord is the only sure choice for jig, and it doesn't stretch, which gives you instant pecking signals and allows you to do a sharp, sweeping cut. The cord color can be any, but the bright salad or orange threads are better visible in the water, which helps control the position of the bait.
Search tactics and types of posting
The search for a pike begins with a search for the bottom topography. The predator is bound to anomalies: exits from pits, dumps, single snags or flooded bushes. When you're on a boat against the current or across the wind, you need to constantly monitor the sonar screen. You see a characteristic arc or cluster of dots at the bottom, stop and start catching the site.
The main method of fishing is stepwiring (classic jig). After throwing the bait falls to the bottom. The number of seconds of falling before the moment the cord is tensed indicates depth. Then there is a series of 2-3 turns of the coil handle and pause. Pause The key point is that it is the fall of the bait that most often occurs when the perch attack occurs, and the pause should last 2-4 seconds.
If the classic step doesn't work, try wiring with a rod toss, a sharp swing of the form, then a slack line sampling with a coil, and this animation gives a silicone fish or a foamfish a chaotic, runaway movement that perfectly provokes a passive predator.
☑️ Pre-throw check
It's important to vary the wiring speed. Sometimes the pike only reacts to very slow dragging of the bait down the bottom with long pauses of up to 7-10 seconds. Other days, especially at high atmospheric pressure, only aggressive, fast wiring works. Experiments with rhythm are key to success.
Seasonal features and choice of baits
Spring fishing of the pike from the boat begins after spawning ban, when the water is already warm enough, while the predator is kept in relatively shallow areas where the linen spawned. Small baits are used: vibra tails 7-9 cm long and narrow-bodied silicone fish. Colors are preferred natural: machine oil, ultraviolet, translucent with sequins.
In summer, when it's hot, the pike rolls down deep bed pits and comes out for feeding, mostly at night or on the spotlights, and in the daytime, it can only be caught in the deepest areas using heavy loads. The summer pike is often capricious, so you need to have baits made of edible silicone soaked in attractants in your arsenal.
Autumn is a golden time for a spinner. Sudak collects fat before winter and eats actively. During this period, large lures are working: rippers 12-15 cm long, doubles and tees of large sizes. Colors become brighter and contrasting: orange, bright green ("chartreuse"), red. A critical factor in autumn is the water temperature: with a sharp cooling below +8 ° C, the activity of the perch can completely stop, regardless of the time of day.
- 🐟 Vibrotails: Classic genres. Work at any depth. Popular forms: Long John, Shadow.
- 🧽 Fishing foam: Perfect for encrusted places, because of the buoyancy of the material, the foam when it falls, stands up with its tail, provoking an attack.
- 🦑 Silicone squid and octopus: They work perfectly on a passive perch thanks to the game of tentacles on the flow.
- 🐸 Mandula: Composite bait, effective during periods of weak stick, creates powerful vibrations.
And don't forget the live nozzles. The bait (pescar, sticker) placed on a jig head often works wonders when artificial baits are ignored, but using bait requires more delicate gear and frequent replacements of the nozzle.
If the pike is high in the water column and it doesn't take it off the bottom, try to minimize the weight of the load and make the wiring as slow as possible, almost hanging, sometimes using floating silicone, which pops up at a pause.
Fishing technique and safety
The perch is very special when you feel a blow, you have to make a sharp, amplitude cut with your hand, the pike's mouth is bony and stiff, the weak cut often leads to a sudden cut. After the cut, don't let the line sag, keep the tension constant.
Sudak is not so much a fast fighter as a hard-nosed fighter; he can snuggle to the bottom or go into the snags. Your job is to keep him from doing that. Raise the rod vertically up, work with the reel when the fish allows. If the pike is down, try to change the angle of tension by moving the boat (if the situation permits) or by using short jerks.
You only have to take a fish into a boat with a sucker or a lichen (cooker). Taking a pike with your hands, especially a large one, is dangerous: its spiny fin rays and gill covers can cause serious cuts, and a hook deep in your mouth is difficult to remove without a hold. Use a yawner and an extractor to safely release the hook.
⚠️ Attention: Always watch the balance of the boat when catching a large trophy. A sharp jerk of a fish or a careless movement of a fisherman can lead to rolling and even turning the boat, especially if you are standing.
Water safety is priority number one. Even if you're a great swimmer, a life jacket is a must. The weather on large bodies of water changes rapidly, and sudden squall wind can create a dangerous situation. Always have a backup plan in case of engine failure or loss of anchor.
The success of catching a pike from a boat depends 80 percent on finding the right relief with a sonar, and only 20 percent on wiring, and without knowing where the fish are, all other skills are useless.
Frequently Asked Questions (FAQ)
What is the minimum size of a boat needed to catch a pike?
For comfortable fishing by two, the minimum length of an inflatable boat should be 320 cm Smaller boats (280-290 cm) will be too unstable to fully work with two spinning and anchor system, especially in the presence of a wave.
Why does the pike not take silicone, but peck on foam?
The foam is buoyant, and when it pauses, it doesn't lie on the bottom like silicone, but it stands upright, wiggling its tail on the current, and this often provokes an attack by a passive pike that doesn't want to chase active prey.
Do I need a gag for a perch when fishing from a boat?
A gag is highly desirable, it securely fixes the mouth of the fish, protecting your fingers from teeth and gill stamens, and it also allows you to safely extract hooks without injuring the fish unnecessarily if you plan to let go of the catch.
Can you catch a pike by trolling from a boat?
Yes, trolling is a very effective method of finding and catching a pike, especially in large waters, allowing you to quickly "break through" large areas and find active fish, but spinning (jig) usually gives a more emotional result and allows you to catch in stronger places.