A PVC boat is not just a transport, it's your own houseboat, but even the most reliable model requires the right equipment to make fishing, hunting or family trips safe and comfortable. PVC boat accessories They solve two key tasks: they protect the boat from damage and simplify its operation, and also make the stay on the water more pleasant for the crew.
Many PVC boat owners face a dilemma: what to buy first and what to do without? cat anchor It seems like a must, but what weight to choose for your model? high-backedIf you only walk short distances, we'll take a look at this. top-10 accessories90% of owners really need them, and we will tell you how to save money without compromising security.
The modern market offers hundreds of items, from low-cost Chinese pumps to premium German seats, but not everything that is expensive is really necessary. We analyzed the reviews of experienced water engines and compiled a checklist that will help you avoid unnecessary costs and assemble the perfect kit for your tasks.
1. Anchors for PVC boats: how not to fly downstream
Without a reliable anchor, even on a calm lake, the boat can be blown by the wind or by the current. three-type anchors: cat anchor (4-6 kg), anchor (flat, 3-5 kg) and mushroom-like (for muddy bottom). Cat. It's universal in most water bodies, but on a rocky bottom, its paws bend. Danforth is better at keeping it in the sand, but requires the chain to be laid properly.
The weight of the anchor is calculated by the formula: 1 kg for every 30 kg of weight of a boat with an engine and passengersFor example, for a boat. Honda FB-330 (max. load 400 kg) will be enough anchor for 12-15 kg. Don't skimp on the rope. - Take a wicker cord with a diameter of 8-10 mm with a capron braid so that it does not rub against the side.
- 🔹 Cat anchor 5kg - Optimal for boats up to 350 kg (price from 1 200 RUB)
- 🔹 Danforth anchor 4kg - for the sandy bottom (from 1,800 RUB)
- 🔹 Folding anchor - for compact storage (from 2,500 RUB)
- 🔹 Anchor buoy - not to lose anchor at a depth (from 800 RUB)
⚠️ Attention: Never attach the anchor end directly to the boat! jack-carbine Or the eight-knot, that's going to save the boat when the anchor is hooked on the driftwood.
Pumps for PVC boats: which to choose for quick pumping
A hand pump complete with a boat is an emergency option. foot-pump electrical (e.g., with a gauge gauge) Bravo BP-12Pump the boat in 5-7 minutes, but require a source of 12V. Sevylor Foot Pump) are smaller and independent of the outlet, but physically tedious for larger boats.
Key parameters in the selection: The pumping pressure should be 20% higher than the passport pressure for your boat (usually 0.2-0.25 bar). For example, if the instructions indicate 0.22 bar, the pump must withstand at least 0.26 bar. productivity (liters per minute) - for a boat with a length of 3.5 m, a pump of 300 l / min is needed.
| Type of pump | Pumping time (boat 3.2 m) | Nutrition | Price, RUB |
|---|---|---|---|
| Hand-held two-chambered | 15-20 minutes | — | 800–1 500 |
| Foot (with gauge) | 8-12 minutes | — | 2 500–4 000 |
| Electric 12V | 5-7 minutes | Lighter/battery | 3 500–7 000 |
| Battery (Li-ion) | 6-10 minutes | Built-in accum | 6 000–12 000 |
If you use an electric pump from the battery, connect it through a fuse on 10A - this will save the wiring from short circuit during voltage surges.
Seats and backs: ergonomics on the water
The standard inflatable seats complete with a boat are not designed for long trips - after an hour, the back starts whining. Decision: high back seats (e.g., Intex Excursion Pro) or rigid plastic seats with transom mounts. turn-seat (like) Swivl-Eze) which allow for rapid rotation when plucked.
The material of the upholstery should be water-repellent (polyester 600D) and c UV protectionIf you don't, the fabric will burn out in the season. rubber-stick (does not scratch the material) or transom.
- 🪑 Back seat inflatable - for short walks (from 2 000 RUB)
- 🪑 Plastic seat with a stand - for fishing (from 3,500 RUB)
- 🪑 Turning pin seat - for trolling (from 5000 ))
- 🪑 Box seat with tackle compartment - 2 in 1 (from 6,000 ))
⚠️ Attention: Don't install metal seats without rubber pads - they will rub PVC with constant friction. silicone or mats.
4. Locks and fasteners: how to place gear and things
One of the main disadvantages of PVC boats is the limited space. Tracks on the transom (for example, Raid Bag Rack) allow the boxes to be placed without taking up space inside. vertical-holder (like) Scotty Rod Holder), and for bags - carbine-net, which are attached to D-rings.
When choosing a trunk, check: Load capacity (For a battery box, you need a 20+ kg boot). Mounting material Aluminum or stainless steel (plastic breaks when impacted). Altitude adjustment - so you don't interfere with the engine.
Make sure the mounts are compatible with your boat's transceiver.
Check the maximum load (specified in the data sheet)
Choose a model with anti-corrosion coating
Evaluate the availability of things from the seat (no need to get up)
-->
How to fasten the trunk to the transom without drilling?
Use it. rubber-plated (for example, Railblaza StarPort>. They are attached to the boat's D-rings and can hold up to 15 kg. For greater reliability, add a safety cable tied to the trunk handle.
Remixes and glue: emergency kit for PVC
Even a small puncture from a hitch or fishing hook can ruin the way out to the water. Minimum refit shall include: PVC patches (better with a glue layer, for example, Tear-Aid Type A), glue (two-component) Bostik 2402 or UHU Plus Endfest 300), sandpaper (grain 120-180 for cleaning), baking-cloth for degreasing.
Emergency repair technology:
1. Find a puncture (you can use a soap solution - bubbles will show the place of leakage).
2. Clean the area with sandpaper and defat with alcohol.
3. Apply glue on the patch and boat, press for 10-15 minutes.
Important: Don’t use superglue or “moment” – they destroy PVC!| Type of damage | Repair kit | Repair time | Cost, |
|---|---|---|---|
| Puncture to 5 mm | Paint + glue | 20-30 minutes | 500–1 200 |
| Cut to 10cm | Pattern + reinforcement net | 1-2 hours | 1 500–3 000 |
| Separation of the seam | Special glue for stitches | 4-6 hours | 2 000–4 000 |
6. Additional equipment: what else will come in handy
In addition to basic accessories, there are "chips" that make the operation of the boat easier: transom wheels (for example, Raid Wheel Kit) for the carriage of a boat on shore without assistance. LED lighting For night fishing (select waterproof models with IP67). Echo-holder - so as not to drill the hull of the boat. Awning from the sun - saves from heat stroke on a hot day.
For safety, you must carry: Life jackets (by number of passengers), scoop for the pumping of water, whistle-and-mirror (GIMS requirements).
- 🔦 LED tape 12V - flexible, glued on board (from 1,500 )
- 🎣 The rod holder - for 2-4 rods (from 2 000 RUB)
- 🚜 transom wheels - collapsible, with depreciation (from 4 500 ))
- ☀️ Tent shelter - with UV protection 50+ (from 7000 RUB)
The most common mistakes when completing PVC boats: buying too heavy anchor (difficult to lift), cheap pump without pressure gauge (failure or pumping cylinders) and metal accessories without protection (corrosion and damage to PVC).
7. Where to buy accessories: shops vs marketplaces
Prices for accessories for PVC boats can vary by 2-3 times depending on the place of purchase. Specialty shops (for example, Fishing-Trade, Boats-PVC.ru) offer certified products with a guarantee, but often 15-20% more expensive. Marketplaces (Ozon, Wildberries) is cheaper, but the risk of running into a fake is higher - check the reviews and ratings of the seller.
The best option is Order through official brand dealers: Intex, Sevylor, Bravo or RaidThey often discount accessories, like an Anchor + Pump + Remake, which is 10 to 15 percent cheaper than buying one.
⚠️ Attention: When buying on marketplaces, avoid products that are labeled "universal" or "all boats fit." anchorage They must be compatible with the D-rings of your model, otherwise the anchor will break when the armature is thrust.
FAQ: Frequent questions about accessories for PVC boats
Can a car compressor be used to pump a boat?
Yes, but with reservations, the compressor must have pressure-regulation (maximum 0.25 bar for PVC) and valve-driver (usually) Boston valveDo not use compressors for tires, they create too high pressure and can tear cylinders.
It is better to buy a specialized pump with a pressure gauge - it is safer and faster (pumps the boat in 5-7 minutes against 15-20 minutes with a hand compressor).
Which anchor is better for a river with strong current?
For rivers with a flow of 1.5 m / s is suitable Danforth anchor weighing 5-7 kg or folding-anchor cat with elongated paws (for example, Raid Anchor ProImportant:
- Use a chain 1-1.5 m long before the rope - it extinguishes the jerks.
- The length of the anchor end should be 5-7 times greater than the depth.
- Check the fastening of the carbine to the boat - with a strong jerk, a weak knot can burst.
Do I need to register a PVC boat with an engine in GIMS if I put a trunk on it?
The trunk itself is not a modification affecting registration. stationary trunk weighing more than 10 kg If you change the design of the transom, for example, welding a metal frame, it can be considered a refit.
- Get permission to convert to GIMS.
- Re-examine.
- Make changes to the boat's ticket.
For removable trunks (mounted on clamps), registration is not required.
How to store accessories in the winter so that they do not spoil?
Before winter storage:
- Anchor and chain - Clean from rust, lubricate with solidol, store in a bag with silica gel.
- Pump - drain water from the hoses, lubricate the rubber seals.
- Siedenia - Dry, treat. UV-protective spray (for example, 303 Aerospace).
- Electronics (echo sounder, backlight) - remove the batteries, store at plus temperature.
Do not store accessories in a damp room - PVC patches and glue lose their properties when humidity is above 60%.
What accessories can I make myself for a PVC boat?
Several budgetary decisions:
- The rod holder - from PVC pipe with a diameter of 50 mm and clamps.
- Trawn trunk - from aluminum profile and plywood (must be painted) sail-lacquer).
- Anchor buoy - from a plastic bottle (5 liters) with sand and rope.
- Standing up - from a rubber mat glued to a plywood base.
The main rule of homemade: Do not use sharp attachments (nails, screws without washers) - they will punctur PVC on impact.