Equipping an inflatable vessel with fishing nets is a process that requires not only technical knowledge but also a deep understanding of hydrodynamics and legislation. PVC boat net The soft side, low landing of the fisherman and specific handling dictate their own rules of the game, ignoring which can lead to loss of catch or even a boat flip.
Unlike hard-bottom boats, inflatable boats have high sailing speed and less inertia, which makes heavy bottom nets particularly difficult. You have to consider every kilogram of tackle weight, because overloading a transom or one of the sides can be a fatal mistake in strong current conditions. slug or larger motnaya allow you to effectively catch coastal zones, pools and overgrown areas where a large trawl will not pass.
The choice of material is the foundation on which the effectiveness of all gear is built. twisted Polypropylene or capron fishing line have different degrees of rigidity and buoyancy, which directly affects the behavior of the net in the water. For PVC boats, the most common choice is lightweight but durable materials that will not pull the boat to the bottom when hooked, but will withstand the jerks of large fish.
So, you have to pay special attention to the selection of the loaders and the floats, and the balance is the key, if the top pick is too easy and the bottom pick is too heavy. net It can be "accordance" or flip over by releasing fish. It is critical for inflatable sides to use smooth-surfaced loaders to avoid punctures in accidental contact during the sampling of the tackle.
The size of the cage must be strictly in line with the fish and local fishing regulations. The use of fine-mesh nets is often regulated by law, and violation of these rules entails serious fines and confiscation of property. The optimal option for amateur fishing from a PVC boat is considered a combined net with varying mesh size, where the entrance part has a smaller cage and the bag is larger.
⚠️ Attention: Using nets with a smaller than the one allowed in your area is equivalent to poaching. Always check the current fishing rules for your pool before buying or making gear.
Design features of nets for inflatable boats
The design of the net for operation from the side of an inflatable boat should be as light as possible, but functional. net-clothFor PVC boats, it is preferable to use canvases without rough knots on the outside to minimize the risk of hooks for items of equipment or fishing clothes.
The top and bottom are made of a strong cord, often with woven wire or cable to increase strength. The top is equipped with floats that should ensure positive buoyancy of the entire structure. The bottom cord is loaded, and here it is important to choose the type of loaders: lead beads, ceramic cargo or cast lead loaders. PVC boats Recommended streamlined loaders that do not have sharp angles.
The net wings are the lateral parts that direct the fish into the moth, and their length and height are calculated based on the depth of the reservoir and the width of the area being captured. The wings on a small boat will be almost impossible to choose by hand without an assistant, so compact models are optimal for single fishing with PVC vessels.
- 🎣 Material: Preference is given to capron thread with a steep, which is less confused and dries faster.
- ⚖️ Weight: The total weight of the tackle in dry form should not exceed 15-20 kg for comfortable work from the board.
- 🌊 Floating: The floats must withstand the weight of the wet net plus an additional margin in case of a wave.
Use floats bright orange or red color – this will not only improve the visibility of the tackle on the water, but also reduce the risk of hitting it by other boats.
Installation and installation of a net on board the boat
The process of installing a PVC net on a boat requires careful preparation of the workplace. Unlike metal boats, where you can use magnetic holders or rigid brackets, inflatable boards have to use soft mounts and special liner systems. stability boat.
For fixing the net, special ducks or dips glued into cylinders or removable holders attached to a leer stretched along the side are used. When installing, contact of sharp elements of the loaders or carbines with cylinders should be avoided. Experienced boaters recommend the use of intermediate containers or mesh bags for temporary storage of the selected part of the net.
The pattern of laying gear in the boat before going to the fishing point also matters: the net should lie in free loops, without twisting or getting confused with the engine or other gear. A chaotic abandoned net can cause an accident in a sharp start or maneuver.
☑️ Checking before installing the net
When installing a motor or winch to sample the net (if mechanization is used), you need to ensure that the base is rigidly attached to the floorboards or transom. Vibration from the operation of the winch can damage the inflatable elements, so there should always be a damper pad between the mechanism and the boat.
Fishing technique: casting and sampling of the net
The technique of working with the net from the side of an inflatable boat is very different from fishing from shore or from a large boat, where coordination of movements and the ability to work in pairs with a partner is crucial, because it is extremely difficult to cope with a complete net alone on the current. The casting (landing) of the net must be carried out smoothly, without jerks, so that the tackle falls on the water with the correct arc.
When sampling tackle, it is important to keep a constant rhythm. Sharp jerks can cause the fish to break off or, worse, damage the net by getting stuck in the cells. Neil sampling It's usually done from the nose or from the side, depending on the design of the boat and the location of the engine. If you're working together, one person rows or holds the boat against the current, and the other person chooses the net.
Special attention is paid to the moment when the motney approached the board, at which point the boat should be as stabilized as possible, the inflatable sides are soft, and you can not rely on them with all the weight when pulling out a heavy bag of fish - this can lead to overkill.
- 🚣 Positioning: The boat always turns against the current or against the wind for better handling.
- 🤝 Interaction: Clear distribution of roles: one controls the boat, the second works with the tackle.
- 🛑 Stop light: A pre-agreed signal to stop the sample in case of a hook or hazard.
⚠️ Attention: Never wind a thrown moult or rebounds on the arm or wrist! A sharp jerk of a boat or a hook can lead to severe injuries or pulling a person under the board.
What to do when the net is caught by a snag?
If the net is caught, you can't pull the boat at full throttle. You have to slowly approach the site of the hook, take the end in your hands and, working in water (if safe) or bulge, try to free the gear. In extreme cases, if the hook is dead and there is a risk of losing gear or damage to the boat, you have to cut the rebounds, retaining at least part of the net.
Comparison of materials: Capron, Leska, Polypropylene
The choice of material for the net is always a compromise between strength, visibility in water and durability. For PVC boats where weight matters, polypropylene threads are often chosen, but they have less tensile strength than capron. Capron (nylon) is considered a classic: it is strong, elastic, but very wet and requires careful drying after every fishing.
The linen nets (of monofilament) are virtually invisible in the water, which increases the catchability of shy fish. However, they are more rigid and worse tied into knots, and with prolonged use can "remember" shape and twist. bottom-seinsThose who are often in contact with stones and snags, the line may be too vulnerable to rubbing.
| Characterization | Capron (Twisted) | Lesca (Mononite) | Polypropylene |
|---|---|---|---|
| Strength | High. | Medium | Low/Medium |
| Visibility | Noticeable. | Invisible. | Noticeable. |
| Wetness | High. | Missing. | Low. |
| Price. | Medium | High. | Low. |
| Term of service | 5-7 years | 3-5 years | 2-4 years |
When choosing a material, you should also consider the water temperature. In the cold, some types of polypropylene become brittle, and the capron, on the contrary, retains elasticity. For all-season fishing from a PVC boat, a water-repellent knight thread is the best choice.
For beginners mastering fishing by seine from an inflatable boat, the best choice will be a medium-density capron net - it forgives errors when entangled and is quite durable.
Legal aspects and safety rules
The use of nets, like any other net fishing gear, is strictly regulated by fishing regulations; in most regions of the Russian Federation, amateur fishing by nets is allowed only in certain areas (for example, the Far East, Siberia) and only with a license or a permit. In central Russia, fishing by nets for civilians is usually prohibited year-round.
Violation of fishing rules entails administrative and criminal liability. Inspectors of the State Migration Agency and the Federal Agency for Fishery regularly conduct raids, checking not only the availability of licenses, but also the compliance of gear declared with the parameters. Cell sizeThe length of the net, the fishing time – all these parameters matter.
Safety on the water when working with seines is also the first priority, and the presence of life jackets on all crew members is a must, especially given that working with nets often requires tilting over the side and active movements.
- 📜 License: Always have a valid license for the extraction of aquatic biological resources.
- 📏 Marking: Networks must be labeled with owner data tags as required by the rules.
- 🆘 Save the vest: The use of a life jacket is mandatory for any manipulations from the board.
⚠️ Attention: The absence of a tag on the network is equivalent to poaching even if you have a license, and the tag must be fixed on each network and contain the name of the owner, license number and region.
Care, drying and storage of gear
Proper care of the net is the key to its long service. After each fishing, the gear must be thoroughly washed in fresh water, especially if the fishing was carried out in salty or contaminated water. The remaining dirt and salts can quickly destroy the structure of the thread, making it brittle and brittle.
Drying is critical. Capron nets cannot be dried in direct sun or on hot batteries — ultraviolet and high temperature destroy polymer bonds. Dry in the shade, in the straightened form, ensuring air circulation. For PVC boats, this is especially true, since a wet net in a closed runduk can cause mold and unpleasant odor throughout the boat.
Keeping the net is best in a dry, cool room, rolled up or suspended on special hooks. Avoid storage in a compressed state under the weight of other cargo, this can deform the cell and reduce the strength of the knots.
How to get rid of sludge and algae on the net?
Soak the net in a solution of warm water with the addition of a special means to clean the nets or a weak solution of vinegar. Mechanically remove the algae with a brush is not recommended - you can damage the thread.
Regularly check the condition of the node connection and the integrity of the rebounds. Minor repairs are better done immediately after the damage is detected, using the specialty shuttle and thread of the same diameterUsing inappropriate materials for repairs can cause the network to break down at the most inopportune time.
Frequently Asked Questions (FAQ)
Can I use a net on a PVC motorized boat less than 5 hp?
Technically, you can, but the power of the motor does not affect the ability to use the net, but the ability of the boat to withstand the current and wind when sampling the tackle. With a low-power motor, you will have to row more or rely on the anchor-cat, which complicates the process.
What length of net is optimal for solo fishing?
For single fishing from a PVC boat, the optimal length of the net is 15-25 meters. Longer tackle (30-50 meters) is almost impossible to choose for one person without the risk of entanglement and loss of balance of the boat.
Do I need to register the snail in GIMS?
The net fishing gear itself is not subject to registration with the GIMS as small vessels, but it is subject to registration with the fisheries authorities when obtaining a license, and the net must be marked with registration and control marks (tags).
What is the risk of using a net without a license?
The use of prohibited fishing gear (which include networks in most regions of the Central Federal District) without a license entails a fine for citizens (up to 300-500 thousand rubles), confiscation of the vessel and gear, and in the case of major damage, a criminal case under Art. 256 of the Criminal Code of the Russian Federation.
How to put a net in a boat for transportation?
The net should be twisted into a "cove" or laid in layers in a special bag-net to ensure ventilation, the main rule is not to wet or fold a dirty net, otherwise by the next departure you will get a shoddy lump that will have to be washed for a long time.