Boat bream fishing is a discipline that requires a special approach to gear installation, because the conditions are radically different from shore fishing. Vertical bait delivery and the absence of current at the fishing point (or its specificity) dictate their requirements for flexibility and stealth of tooling. leash It becomes a key element that determines the number of bites sold, since a large bream is extremely careful and sensitive to the resistance of the fishing line.
Many anglers make the mistake of using standard shore leashes, not considering that the angle of attack of the bait varies from the boat, and in this article we will discuss in detail how to choose the optimal length, diameter and material to make your tooling work like a clock. When fishing from a boat, it is critical to use shorter leashes than shore leashes (usually 15-30 cm), since the long tail of the line when vertically wiring is often confused with the main line or nod.
Selection of material: fishing line or fluorocarbon?
The main dilemma in assembling gear is the choice of material. The classic monophilic fishing line has good stretchability, which helps to extinguish fish jerks, but it is noticeable in the water and has a memory. For fishing from a boat, where the distance is often short, but the water transparency can be high, many choose to choose from the same fishing method. fluorocarbonThis material is virtually invisible to fish and resistant to the abrasive effects of the shell.
But don't blindly trust marketing. monophile A diameter of 0.10-0.14 mm often works better than thick fluorocarbon, which can be tough and alarm fish. The softness of the material plays no less a role than its stealth, especially when the bream takes the bait carefully, "sweeting" it.
If you fish in areas with abundant vegetation or shells, tensile strength becomes a priority. leash And they're all braided, although this is rare for bream fishing, and most often, they're willing to compromise on this: a high-quality line with a low refractive index of light.
Secret technique
Double Fluorocarbon: Some athletes twist two thin filaments of fluorocarbon (0.10 mm) together, giving the thicker line strength but retaining the flexibility and stealth of the thin thread.
Optimal length of leash for boat fishing
Leash length is a parameter that directly affects the play of the bait and the visibility of the tooling. When fishing from a boat, especially a nod fishing rod or short board, a long leash becomes a burden. It can overboard, get confused with a sonar or an anchor thunder.
For most situations, the ideal range is 15 to 30 cm, which allows the nozzle to behave naturally on the flow and allows for effective cutting. bottom-handle from a boat (e.g. a “ring” or short feeder), the length can be increased to 40-50 cm for better cushioning.
- 🎣 10-15 cm: Ideal for fishing on the current with a nod, when you need a hard transmission of vibrations to the mormy.
- 🎣 20-25 cm: The universal option for float fishing rod from the board, provides natural immersion.
- 🎣 30-40 cm: It is used when fishing on a silted bottom or when the bream is shown increased caution.
It is important to consider the depth of the fishing site. At depths up to 3 meters, you can use shorter options, whereas in pits over 5 meters it is better to lengthen the tooling so that the fish are less afraid of the shadow of the boat and noise.
Line diameter and burst load
The choice of diameter is always a balance between strength and invisibility. Bream, especially large, has excellent vision and a side line that feels the slightest tension. Too thick fishing line can negate all efforts to find fish. For a medium bream weighing up to 1 kg, a diameter is quite enough. 0.12-0.14 mm.
If you are focused on trophy fishing, where you can bite fish weighing 2-3 kg or more, the diameter should be increased to 0.16-0.18 mm. However, remember that with increasing diameter, the sailing line on the flow increases, which can worsen the game of bait. Modern materials allow you to use thin fishing lines with a high burst load.
Don't forget the knots. Any knot reduces the strength of the fishing line by 10-20%. So when choosing a diameter, always make adjustments for the loss of strength in the knots. professional fishing-housesA scalp, such as Palomar or Clinch, minimizes losses.
Check the line on the knots. Before each fishing, swipe your fingers along the entire length of the leash. If you feel rough or burrs, ruthlessly change the leash, otherwise a cut of the fish is inevitable when cut.
Selection of hooks and their effect on the cut
The hook is the final element of the chain, and its choice is critical for effective cutting. For a bream with its retractable pipe mouth, hooks with rounded undergarment and a short or medium forearm are best suited. The color of the hook also matters: light models are preferred for light bottom and moth, dark silt and worm are dark, crowed or bronze.
The size of the hook varies from No. 10 to No. 14 in international classification (Russian - from No. 4 to No. 7). It is important that the sting is sharp and has a light notch to better hold the bait. A dull hook will lead to empty bites, as the bream will simply spit out the nozzle.
| Type of nozzle | Recommended hook size (Intl) | Type of forearm | Colour |
|---|---|---|---|
| Moth (bundle) | №12 - №14 | Short. | Red/Blue |
| Oparysh | №10 - №12 | Average | Gold/Bronze |
| worm | №8 - №10 | Long. | Dark bronze. |
| Pearl/Maize | №10 - №12 | Short. | Gold |
When fishing from a boat, we often use mormycats, and in this case, the hook is already soldered into the loader, and it is important to monitor its sharpening and shape, and the cut should be sharp, but not sweeping, so as not to take the bait from the mouth of the fish.
Installation and methods of fixing the leash
The way the leash is attached to the main line or nod depends on the type of tackle. The most common way a float fishing rod is to use a loop or a vertebral rope. The vertebral rope prevents the fishing line from curling, which is especially important when fishing on the current or using inert lures.
When using a nod fishing rod, the leash can be part of the main line (deaf tooling) or attached through the connector. Deaf tooling is more sensitive, but less convenient with frequent change of depth. Connectors allow you to quickly change the tooling depending on conditions.
☑️ Checking the leash's readiness
Pay special attention to the node. Node Eight. or "Loop in the loop" should be done carefully, without overlapping. Before tightening, the knot must be moistened with water or saliva, so that the line does not overheat and lose strength.
⚠️ Attention: Never tie the leash to the main line with knots that form "mustache" or protruding ends. Bream is a fish that is shy, and any extra elements in the water can alert it. All ends of the line after tightening the knot should be cut as close as possible, but without damaging the knot itself.
Tactics of replacing leashes in the process of fishing
The frequency of leash change is a personal matter, but there are general rules: If a large bream has been caught, it is better to replace the leash, since it could have received microtraumas or sprains, and replacement is mandatory after a seashell or snag has been caught.
It makes sense to change the leash when the fish activity changes. If the leash is weaker, try to put the leash thinner or shorter. Sometimes changing the color of the line or hook changes the situation on the pond. Always carry a stock of pre-prepared leashes of different lengths and diameters.
It is best to store the leashes in a special chain with soft inserts so that the line does not deform. Wrapped "in a ring" or on the coils, they will always be ready to use and will not be confused in the fishing box.
The main conclusion: the quality of the leash is more important than its price. Cheap fishing line with memory will negate the whole game of bait, so you should not save on this element of tooling.
Frequently Asked Questions (FAQ)
Can a wicker cord be used as a leash on a bream?
The use of a wicker cord as a leash on a bream is not recommended. The wicker is too noticeable in water, has no extensibility (which leads to frequent descents when sharply cut), and is easily rubbed against the shell. Except for special fluorocarbone leashes with a wicker core, but they are rare and expensive.
Which knot is best for tying a hook to a fishing line?
The best way to tie a hook to a fishing line is to use the Clich Knot or Palomar Knot, which are easy to execute, maintain up to 90-95% of the strength of the fishing line, and hold the hook securely even when a large fish jerks, and the main thing is to wet the knot before tightening.
Should I change the leash after every fish I catch?
You don't have to change the leash after every fish unless you're clearly injured, but if you're catching a large bream or you're fishing on a shell, you have to check the leash after every trophy, and you'd better be safe and replace a 15-centimeter line than lose your dream fish.
Does the color of the leash affect the bream's stick?
Yes, the color of the leash can affect the stick, especially in clear water and when fishing for cautious fish. The most versatile are considered transparent, bluish or light green shades. In dark water or at night, color matters less than the diameter and softness of the fishing line.