Any fishing or water trip on the floatboat It becomes a challenge if you don't have a comfortable seat, and standard inflatable tubes or rigid cans without back support quickly cause fatigue, which negatively affects concentration and general mood. back-seat It becomes one of the first elements of tuning, which acquires an experienced boating.
The modern market offers many solutions, from simple folding chairs to complex transformable systems with adjustable armrests, and choosing the right model depends not only on the budget, but also on the design of the boat itself, as well as on the scenarios for its use. balancing boat or damage its side.
In this article, we will discuss the basic types of construction, materials and installation nuances, how to turn an ordinary inflatable boat into a comfortable boat, where your back will not hurt even after eight hours of waiting for the cool stick.
⚠️ Attention! Any additional equipment, including seats, must not exceed the boat's load capacity and be untightened. Always make sure that the supports do not RUB against the cylinders under load, as this can cause PVC fabric to be wiped.
The main types of seat designs
The first thing that the buyer encounters is the variety of forms and ways of attaching. movable They're built on two supports that are mounted in nests or just leaning on the bottom of the boat, and they're versatile and suitable for most inflatable boats.
A more advanced solution is stationaryThey allow the fisherman to turn 360 degrees, which is critical when fishing for spinning or trolling, but they require more training and are often impossible to install without interfering with the structure of the floorboards (bottom).
- 🪑 Transportation: Lightweight folding models that take up a minimum of space in the bag and quickly assemble.
- 🔩 Fixed: massive structures with rigid fixation to the floor, providing maximum stability.
- 🔄 Transformers: universal options where the back can recline or be removed, turning the chair into a regular jar.
The models with adjustable back height and seat tilt deserve special attention, they allow you to take the most ergonomic posture, reducing the load on the spine. cockpit-width Your boat so that the supports don't rest on the side.
⚠️ Attention! Do not use homemade wooden structures without antiseptics and moisture varnishes. In conditions of constant humidity and water ingestion, the tree rots quickly, becomes heavy and can damage inflatable tubes with sharp edges.
Materials of manufacture and their specifications
Durability and comfort depend on what is made of. boat-seatThe main materials are aluminum, stainless steel, plastic and various types of fabric. Aluminum profile is the "gold standard" due to its combination of lightness and strength, it does not rust and withstands significant loads.
The fabric part is most often made from Oxford with PVC coating. This material does not absorb water, dries quickly and is resistant to ultraviolet light. More expensive models can be equipped with soft foam inserts or mesh elements for better performance. ventilation in hot weather.
When choosing, pay attention to the quality of welds and joints. Cheap Chinese counterparts often sin with a thin metal that can deform under the weight of a large fisherman in winter clothing. Stainless steel heavier than aluminum, but provides unsurpassed rigidity of the structure.
For fishing in hot climates, choose seats with a mesh back or perforated plastic. Oxford fabric, although it dries quickly, can create a "greenhouse effect" in the sun, causing discomfort.
Mounting and installation methods
Seat installation is a very careful process, and the simplest way is to use a pole that rests on the bottom of the boat, and to protect the PVC material from puncture and abrasion, you have to put a special set of legs under the legs. heel Or they use soft pads, and this is especially true for inflatable floor boats.
A more reliable method involves installation in the regular lead-snout If no such items are available, many anglers will self-seal the nests into floorboards or boards, requiring sealing of docking sites, using special PVC glue and reinforced fabric.
There are also railing systems, if you have them on your boat, that allow you to hold the seat on a weight or back to the side, freeing up space on the bottom, but this is only suitable for boats with rigid boats. transaxial Or reinforced sides.
☑️ Pre-installing check
Ergonomics and comfort in long-distance swimming
When it comes to hours of fishing, ergonomics come to the fore: A regular flat seat does not ensure proper weight distribution, leading to leg fouling and lower back pain. anatomical form The seats help maintain the natural curve of the spine.
The best angle is 100-110 degrees, which allows you to lean back slightly, while maintaining control. Some models have adjustable head restraints, which makes fishing a full rest.
And the width of the seat, too narrow, will squeeze the hips, disrupting circulation, and too wide can interfere with the control of gear. Optimum width It is 40-45 cm, which is suitable for most builds.
Comfort on the water consists of small things: the presence of armrests, the ability to adjust the inclination of the back and softness of the coating is not a luxury, but a necessity for the health of the back.
Comparative table of popular models
To make it easier to choose, we have compared the specifications of the different types of seats on the market, and these parameters will help determine which model will best suit your needs and budget.
| Type of seat | Weight (kg) | Max. load (kg) | Frame material | Features |
|---|---|---|---|---|
| Folding (chair) | 2.5 - 3.0 | 120 | aluminum | Compact, low price |
| Turning (chair) | 4.5 - 6.0 | 150 | Nerzh. | Rotation 360°, stability |
| Transformer. | 3.5 - 4.0 | 130 | aluminum | Removable backrest, versatility |
| Soft (Inflatable) | 0.5 - 1.0 | 100 | PVC | Minimum weight, requires pumping |
As you can see from the table, the weight of the structure varies greatly, so if you go fishing alone and carry a boat for long distances, every kilogram counts, and in this case, aluminum folding models will be preferred to massive stainless steel chairs.
Seat maintenance and maintenance
Even the most expensive. boat-seat After each foray into the water, the structure must be thoroughly washed with fresh water, especially if the fishing was in salt water, and the salt aggressively affects the metal, causing corrosion even on low-quality stainless beans.
The fabric elements should be dried in a straightened form, away from direct sunlight. Drying in a compressed state can lead to mold and an unpleasant odor that is difficult to get rid of. Periodically check the tightening of bolt joints, as vibration during the boat can weaken them.
How do you get rust off the frame?
If corrosion is detected on metal elements, use special rust transducer sprays. After processing, be sure to coat the metal with protective varnish or paint for metal to prevent re-oxidation. Do not rub the painted parts with abrasive sponges.
It is better to store seats in a dry room at room temperature. Sharp temperature changes and high humidity in a garage or shed can adversely affect the condition of the fabric and lubrication of mobile mechanisms. Regular lubrication of hinges with silicone lubrication will prolong the service life of the product.
Frequently Asked Questions (FAQ)
Can I install a seat on an inflatable floor boat (BBB)?
Yes, but with caution, you need to use special support extenders or soft linings to distribute pressure and not damage the bottom cylinders. Hard metal legs without protection can wipe PVC with prolonged load.
What is the maximum weight of a standard fishing chair?
Most high-quality models are designed for loads up to 120-150 kg. However, when choosing a margin of safety of about 20-30%, especially if you plan active fishing with sudden movements.
Do I need to remove the seat when transporting the boat in assembled form?
Most of the time, yes. Seats take up a lot of space and can damage cylinders when shaking, except for very compact folding models that can be neatly stacked along the side, protecting sharp corners.
What is the difference between sea stainless steel and ordinary in the context of seats?
Marine stainless steel (marks 316) has a significantly higher resistance to chlorides contained in sea water. Conventional stainless steel (marks 304) in salt water can eventually become covered with spot corrosion, although in fresh water behaves perfectly.