Capturing a large bream from a boat is a top-of-the-line fishing experience that requires not only knowledge of fish habits, but also a specific approach to the configuration of the arsenal. Unlike coastal fishing, where long feeder rods dominate, the bream gear from the boat should be compact, but have enough power to catch trophies. Bream fish is cautious, schooly and sensitive to the slightest changes in the atmosphere and composition of bait.
Well-assembled tools allow you to catch hard-to-reach areas of the bottom where large fish stand without creating unnecessary noise and shadow. The main advantage of fishing from a boat is the ability to spot feed promising points such as eyebrows, dumps and holes among the algae. boat-bream It reveals its potential, allowing you to lower the bait exactly in the center of the fertilized spot.
But success depends not only on the rod, but also on the right strategy for finding and behaving on the water, and in this article we will examine all the nuances of the equipment, from choosing a fishing rod to feeding tactics, so that your fishing was effective.
Selection of fishing rodThe key element that starts the system assembly is the rod, because fishing is done in a limited space of the craft, the length of the whip is usually not more than 2-2.5 meters. Longer forms will create discomfort when catching and cutting, especially if there are several people on the boat.
For fishing on the current is often used fishing-rodThe rod test is selected depending on the depth and strength of the flow: for deep places with a strong current, you need hard forms with a test of up to 80-100 grams to keep the tooling at the fishing point. In standing water or in a weak current, soft fishing rods with a test of 20-40 grams are preferable, which will allow you to feel more cautious bites.
The blank material also plays a role. Graphite rods are very sensitive, but they are fragile and require careful handling. Fiberglass or composite more forgiving errors when transporting and striking the boat side. It is important that the handle is made of material that does not slide in a wet hand, such as EVA or cork.
Nods and grating alarmsIn boat fishing, the nod has a dual function: it sets the game to the nozzle and signals a bite. For a bream that often tries the nozzle with its lips before swallowing, the maximum sensitivity of the watchman is important. A hard nod may simply not register a careful touch, and anglers will miss the moment to cut.
The best solution is considered to be nod Lausanne watchmen are not afraid of moisture, have no memory and work perfectly on the current. The length of the working part of the nod is selected experimentally, but usually is 15-20 cm. The angle of inclination under the weight of a mormy or feeder should be about 45 degrees.
For night fishing or in poor visibility, nods are equipped with fireflies or electronic alarms. Electronics are good because they allow the angler to distract from the nod, but they require a power source. A mechanical nod is more reliable in the cold and independent of batteries.
In open water wind, the nod can create false vibrations, and in such cases, use windshield tubes or switch to fishing with a float that is less responsive to the boat's jerks.
Installation of equipment: lines, hooks and loadersThe bream gear should be delicate but strong. The bream is strong, and when you catch a boat where you can not retreat back, the load on the tackle increases. The main line is most often used monophilic, with a diameter of 0.20-0.25 mm. The wicker cord is used less often, because it is visible in the water and does not cushion the fish, which leads to frequent descents.
Leashes are put thinner than the main line, with a diameter of 0.12-0.16 mm Leash length varies from 15 to 50 cm depending on the activity of the fish. Hooks. They are chosen based on the size of the nozzle: for the worm, hooks with a long forearm are needed (No. 10-12 according to the international classification), for a moth or a rag - with a short forearm and a thin wire (No. 14-16).
The load capacity of the tooling depends on the conditions. During the course, they use sliding loaders, olives or feeders, cages. In standing water, the weight of the load is minimal, so as not to scare the fish when lifting the tooling, it is important to use high-quality turntables and fasteners to avoid twisting the fishing line and cliffs.
| Element of tooling | Flow parameters | Parameters for standing water | Recommended material |
|---|---|---|---|
| Main line | 0.22 - 0.25 mm | 0.18 - 0.20 mm | Monophile (Nylon) |
| A lead. | 0.14 - 0.16 mm | 0.10 - 0.12 mm | fluorocarbon |
| Weight of cargo | 40 - 80 g | 5 - 15 g | Lead/Wolfram |
| Size of hook | №8 - №10 | №12 - №16 | Chemical sharpening |
☑️ Checking the equipment before throwing
Boat feeding and tactics from the boatWithout proper feeding, fishing bream from a boat makes no sense. The fisherman's job is to assemble a flock at the fishing point and keep it there. From the boat, it's easier to do this than from the shore, because you can use special dump truck feeders or buckets, dropping the mixture exactly to the bottom.
The composition of the bait depends on the season. In summer, bream prefers sweet and fruity flavors, as well as large fractions: steamed peas, millet, barley. In spring and autumn, the animal components: chopped worm, moth, cornflower work better. Scent It should be moderate so as not to scare off the fish.
⚠️ Warning: Never use fresh dung or strong chemical flavors in cold water, which may not attract, but rather scare away breams looking for protein food.
The feeding tactic is to create a table at the bottom, and the feeding should be abundant to saturate the lower layers of water with attractive particles, and in the process of fishing, you need to regularly throw small portions of food to retain the interest of the fish, but not overfeed it.
The secret ingredient for bream
One of the most effective but rarely mentioned ingredients is ground fried hemp, which creates a persistent plume and contains oils that do not flush out of the bait for long, attracting bream from a long distance.
Techniques of fishing on the current and in standing waterFishing on the current requires the angler to constantly monitor the position of the tackle, and the boat must be anchored securely across the current or at an angle of 45 degrees so that the tooling does not get tangled under the bottom, in which case the bait is thrown upstream, creating a plume that reaches for hooks.
Tactics change in standing water. Here it is important to find the relief of the bottom. Bream likes to go to the plateau next to the dumps. The tooling should lie still, and the game can only be a slight movement of the nozzle. Often in standing water, fishing on the "ring" or "eggs" works more effectively, when the feeder with bait lies on the bottom and the fishing rods are located around it.
The slashing should be confident, but not sweeping. The bream has soft lips, and if you push hard, the hook can break them. After the slashing, the fish should be quickly but smoothly raised to the surface, preventing it from going into the grass or under the boat.
The secret to success is to constantly search for active fish, and if there are no bites for 20-30 minutes, even in a fermented place, it is better to move the boat to a new point.
Search for perspective places and navigationYou can't find a bream without understanding the bottom, and deep pits, bed brows, water vegetation boundaries, these are the main sites for this fish, and you can use sonars to look for it, which show not only the depth, but also the presence of fish, but also the structure of the bottom.
When using a sonar, pay attention to the arcs that the fish draws. The bream often holds in the bottom layer, but in the heat can rise into the flounders. The navigator will help mark the catch points to return to them for the next fishing trip.
It's important to consider the direction of the wind. Bream often comes to the leeward shore, where the water is better enriched with oxygen and where the feed is carried away, but in high winds, catching from a light boat becomes difficult and dangerous.
⚠️ Warning: When fishing at depths of more than 4-5 meters in hot weather, be careful. There may be a shortage of oxygen in the bottom layers, and the bream may stop pecking or go higher.
Frequently Asked Questions (FAQ)
Which one is better to use for the bream?
A bundle of dung worms is considered a universal nozzle, but depending on the pond and the time of year, bream may prefer a squirrel, a moth, barley, dough, or even a boil. Experiments with sandwiches (a combination of nozzles) often give the best result.
Do I need to use a float when fishing from a boat?
The float is used less frequently than the nod, mainly in standing water or in low currents, and it's good because it fixes the tooling in the water horizon and allows you to catch on a floating nozzle, and during the course, more efficient bottom montages with a nod.
Why does the bream stop pecking in the middle of the day?
Bream is a fish with a pronounced diet, often the peel stops in the heat or when the atmospheric pressure changes dramatically, and the pack can also be saturated with bait or shift to another depth.
Which boat is better for catching bream?
For bream fishing, stability and quietness are important. PVC boats are good for their lightness and softness, metal boats are more stable in the wind, but noisier, the main thing is the availability of convenient places for the equipment and anchor system.
Can I catch a bream at night from a boat?
Yes, night bream fishing is often more successful than day fishing, especially in summer, at night, large breams come out into shallow water and closer to shore, and there must be a good flashlight, headlamp and glowing alarms.