Set of tackles for catching a pike on spinning from a boat

Finding promising places to catch a fang predator is much more effective when you have a swimming tool, a boat allows you to catch deep-sea brows, riverbed dumps and flooded snags, where the coastal spinner is almost impossible to get to, and it is from the water that you can access the true trophies, which prefer to stay away from the noisy shore at significant depths.

However, fishing from the boat dictates its requirements for the equipment of the fisherman. Puddling gear Not only must they be powerful, they must be compact, so that they don't have any problems maneuvering and catching fish, and a wrong rod or coil can make fishing a torment, especially in high winds or currents.

In this article, we'll take a look at the nuances of jig fishing, and you'll learn why the rod test is as important as its length, how to choose the right wicker cord for sensitive wiring, and which baits work best in different environments.

Choosing a boat rod for boat jig

Selection spinning For boat fishing, it's very different from the shoreline, and if long-distance casting is often required on the shore, then from the boat, vertical wiring and bait control at the depth become the key, so long sticks here will be more of a hindrance than an assistant, interfering with motor control and cut-off.

The optimal length of the form is from 1.8 to 2.1 meters. Longer models are uncomfortable to work in a confined space, especially if there are several people in the boat. The short rod allows you to do sharp, amplitude cutting, which is critical for piercing the hard jaw of the perch, and allows you to quickly lift the fish on board, not allowing it to go under the boat.

The rod structure must be fast or extra fast, which ensures maximum sensitivity to bottom and pecking, as well as instantaneous force transfer when cut. The test range is tailored to fishing conditions: for medium depths and currents, the ideal solution is to range. 15-40 gramsDeep holes with strong currents will require a class. 40-80 grams.

⚠️ Warning: Never use rods with a parabolic (slow) order to catch a pike. Soft form will not allow you to make a hard cut at great depth, and you risk missing prey due to weak fixation of the hook in the jaw.

The material of the form also plays a role. Graphite models have excellent sensory skills, but require careful handling; composite variants are more tenacious, but can "fail" when catching large fish; Choose proven brands that have proven themselves in jig fishing.

Requirements for coil and mechanism

A pair of short, powerful rods must have a reliable, deminert coil. Shimano or Daiwa The smaller size will not allow you to work comfortably with thick cords and large baits, and the larger will make the gear unnecessarily heavy and bulky.

The key here is the traction force and the quality of the fishing line. The sudak often pecks at depth with the current, where the bait creates significant resistance. The mechanism must have a margin of safety to withstand the jerks of the trophy fish and the load when forced to pull out of the snags. The gear ratio is better to choose the power or universal, in the range. 4.6:1 — 5.2:1.

The friction brake must work perfectly smoothly, without jerks and dips. When fishing from a boat, hard catching is often used ahead, but when the fish approach the surface or when hooks are finely tuned, the friction brace saves the cord from rupture. The number of bearings should not be minimal, optimally - from 5 + 1 pieces to ensure smooth running.

• ✅ Reliability of the mechanism: the ability to work in the conditions of water and sand.
• ✅ Capacity of the spoole: the possibility of winding 150 meters of wicker cord with a diameter of 0.14-0.16 mm.
• ✅ Weight: Balancing tackle is important for comfort while fishing for hours in a standing position.

Special attention should be paid to the maintenance of the coil, and after every fishing, especially in salt water or muddy conditions, the mechanism should be wiped and periodically lubricated, which will prolong the life of the expensive element of the tackle.

Wrapped cord or monolesced: what to choose

In jig fishing, there is almost no alternative to wicker cords, and the monophilic line has high extensibility, making it impossible to register weak bites at great depths and distances. Kidney It provides zero stretchability by instantly transferring any touch of the fish to the angler's hand.

The diameter of the cord is chosen based on the transparency of the water and the size of the proposed trophy. 0.12 - 0.14 mm According to the Japanese classification (PE 1.0 - 1.2), thinner cords are stronger than sails in the wind and current, and quickly rub against the shell, which often inhabits the pike brows.

Why is an eight-core cord better than a four-core cord?

Eight-strand wickers (8-strand) have a smoother surface, which has a positive effect on the range and noise of the water passage. They are less prone to wear, but more expensive. Four-strand cords are more abrasion-resistant due to thicker threads in the cross section, but make more noise when wiring. For catching in the shell often choose a quadruplicle of increased strength.

The color of the cord is secondary to fish, but it's important for visual control of the wiring. Bright, fluorescent colors allow you to see the position of the line on the water and react to changes in tension in a timely manner. However, in clear water in shallow water, a predator can react to a bright line, then it is better to use dark, camouflage tones.

⚠️ Warning: When using thin wicker cords, be sure to check the last 2-3 meters before each fishing. The presence of "mahr" or damaged fibers is a signal for immediate ligation, otherwise the break of the trophy at the side of the boat will become an unpleasant reality.

Furniture: carbines, vertebrae and leashes

The quality of the fittings directly affects the effectiveness of fishing. The use of cheap Chinese fasteners often leads to buckling or breakage at the most critical moment. For a pike, reliable vertebral fasteners are required, the size of which corresponds to the bait, but does not overload the game of jig.

Sudak doesn't have teeth that can bite a cord like a pike, so metal leashes are rarely used here, and only in regions with high concentrations of toothy predators. The classic jig uses a bundle: a wicker cord - a fluorocarbon leash - a bait. Fluorocarbon is less noticeable in water and has high abrasive resistance.

Leash length is usually 30-50 cm This is enough to protect the cord from rubbing against the shell and stones. The diameter of the fluorocarbon must be 10-15% larger than the diameter of the main cord, so that the hook or bait breaks when hooked, but not the main wicker.

Arsenal of boat fishing baits

The base of the diet of the fang predator is small fish, so silicone imitations fishes are the main place in the box of the fisherman. Vibrotails and crustaceans sized from 7 to 12 cm show the best results. The shape of the body of the bait affects the game: narrow "longs" are good for passive perch, and wide vibrating tails provoke an active predator.

The weight of a jig head or a loader is matched to the depth and strength of the current. The goal of the angler is to achieve a step of 2-3 turns of the coil. If the pause is too short, put the load easier, if the bait hangs in the water column for a long time, increase the weight. On a strong current, loads may be required up to 60-80 grams.

The color of the bait is a subject of constant debate, but there are working patterns: bright "acid" colors and white (milk) work better in murky water and deep. In clear water and in good light, the pike prefers natural colors: engine oil, green, translucent silicone with sequins.

• 🐟 Vibrotails: classic form, active tail play, works on an active predator.
• 🦐 Silicone crayfish and nymphs: create a lot of noise and vibration, are effective on a passive perch.
• 🐠 Fowl fish: have their own buoyancy, which causes them to stick their tail up at the bottom, provoking an attack.

And don't forget the mandula, because these compound foam and hook baits with a load of cheesy work really well during periods of low perch activity, especially in winter or off-season, and their vertical position in the water and swaying play often work wonders.

Search tactics and wiring technique from a boat

Boat Fishing allows you to use fan tactics or catch along the brow, anchoring or using an anchor stretch (anchor peg), the angler can methodically shoot through the promising sector, and it is important to control the position of the boat relative to the wind and current, so that the cord goes at an optimal angle.

The classic jig wiring is a step. After throwing, we wait for the bait to fall to the bottom (the tension of the cord weakens), we make 2-3 revolutions with the coil handle and again pause. The number of revolutions and the duration of the pause varies. Often the rule is that the more passive the perch, the longer the pause should be and the less amplitude of the toss.

When you're fishing in a bog, you use dragging or short toss, and it's important to feel every poke on the branch, and if you're going to get caught, you should immediately ease the cord tension (put the rod in the water or step to the boat) so that the bait inertia can help it jump off the obstacle.

Comparison of tackle specifications for different conditions

To organize knowledge about the necessary equipment, it is convenient to use a comparative table, which will help you quickly navigate when collecting gear before going to a reservoir with specific conditions.

Fishing conditions	Engle test (g)	Cord diameter (mm)	Type of bait
Shallow water, no flow.	5 - 21	0.08 - 0.10	Light jig, micro rubber
Average depths (3-6 m), moderate current	10 - 35	0.12 - 0.14	Vibrotails 7-9 cm, crayfish
Deep pits (8-12 m), strong current	20 - 60+	0.14 - 0.18	Large silicone, foam, mandula
Fishing in strong, sealed places	15 - 40	0.14 - 0.16	Unlocked, offset hooks

As you can see from the table, there is no universal kit. The angler has to adapt to the conditions, and the presence of 2-3 rods in the arsenal will allow you to be ready for any situation on the water.

Safety and ergonomics in the boat

Boat Fishing requires not only fishing skills, but also safety, so that you don't get overboard when you roll or wave, use rod holders and safety ropes for reels.

Workplace ergonomics are important. Everything you need should be at hand: a lift, a yawner, an extractor, a kukan. Excessive movement in the tight space of a boat can lead to entanglement of gear or falling valuables into the water.

How to store the equipment in the boat?

Equipment should be stored in protected tubes or soft covers, fixed in special compartments or under the seats. Direct sunlight is harmful to graphite rods and silicone baits, so avoid their prolonged exposure to the open sun without protection. Coils are better kept in closed drawers so that sand and dust do not fall into the mechanism.

What if the pike took the bait under the boat?

When grazing under the boat, you can not sharply pull the rod upwards, as this can lead to breakage of the form on the side or pull the hook from the mouth. You need to quickly lower the tip of the rod into the water, select a slack of the cord with your hand and only then make a sweeping but controlled cut away from the boat.

Do you need a sonar to catch a pike?

While experienced anglers can read the relief by the tension of the cord and the nature of the wiring, the sonar greatly speeds up the search, allowing you to see the structure of the bottom, the presence of snags and even schools of forage fish, which helps you find the predator's parking lots faster. For serious fishing, it is an indispensable tool.

Well-assembled gear and tactical knowledge are the foundation of success. Don't be afraid to experiment with wiring and flowers, because the perch is unpredictable, and today it can only take on acid, and tomorrow it can ignore it, preferring natural colors. Good luck on the pond!