Have you ever felt helpless when a predator ripped water under the side of a boat and yours was a snare? boat-side Many anglers make the mistake of using the same rods as when fishing from shore, without thinking about the fundamental difference in operating conditions. The boat opens up depths and points that are not accessible from land, but dictates its own rigid rules of the game, where power and sensitivity are not the main thing.
Well-chosen gear can turn a normal trip into a productive hunt, where every throw makes sense. Unlike shore fishing, there is no need to throw bait for a hundred meters, but it gives you the opportunity to use a heavy arsenal and powerful weapons. wobblerIt's a very physical thing to throw off the coast, and that's why understanding the specifics of boat spinning is a key success factor for any self-respecting angler.
In this article, we will take a look at all the nuances, from the choice of the rod test to the tactical techniques of wiring from the boat. Short whip is often more effective than long whip fishingAnd how to set up your trolling gear to avoid the hurtful squatters of big fish, get ready to dive into the world of professional boat fishing, where the outcome depends on the right gear.
Key differences between boat spinning and shore spinning
The first thing that comes to mind when you look at a boater's arsenal is the size of the rods. If the shore spinner is often limited to climbing bush and making long-distance casts, the boat owner is devoid of these problems, but faces others. boat-spinning This is the ability to work with heavy baits at a short distance and withstand enormous loads when catching.
The length of the rod in the boat often plays against the angler if it exceeds 2.1 meters. Imagine a situation where you need to quickly adjust or take a sucker while the fish is on board: a long stick at this point becomes a huge problem, clinging to gear, motor and board. Short models allow you to maintain full control over the situation and instantly respond to changing fishing conditions.
The materials used in the production of specialized sticks are also very durable, and there are rarely "noodles" or ultra-fast structures designed for delicate microbait fishing. cliff-knob and a hard form, capable of cutting through the mouth of a pike or pike at a depth of several meters, using only a carpal movement of the hand.
⚠️ Warning: Never use light shore rods with a dough of up to 15 grams to catch plumb at depths greater than 10 meters. The flow and weight of the bait will create a critical bend, which will lead to breakage or inability to control the wiring.
Optimal length and test: the golden mean
The choice of length of the rod is always a compromise between comfort and functionality. For most tasks, including jig and twigging from the side, the ideal range is between 1.8 and 2.1 meters. spinning allows you to sit comfortably in the boat, without touching the gear of neighbors, and at the same time gives enough leverage for confident cutting.
The test is even more interesting, because boat fishing often involves jerkbaiting or deep-sea jig, where the weight of baits can reach 100 grams or more. So the upper limit of the test in specialized models often starts from 40-50 grams and can go up to 200-300 grams in jerk models, which allows you to break a strong current and work at great depths.
But don't think that only clubs have the right to live in a boat. For catching perch or perch in the floes, and for twittering wobbles of medium size, rods with a test of 10-35 grams are great, the main thing is that the margin of safety allows you to force the catch, not allowing the predator to go under the boat and confuse the tackle.
When choosing a boat rod, always pay attention to the quality of the bandwidth. When using wicker cords of large diameters and heavy lures, the load on the rings is enormous, and cheap ceramics will quickly become useless.
It is also important to consider the height of the angler, and it will be uncomfortable for a tall person to handle a 1.5-meter rod that is too short, because the range of hand movement will be limited, while for short anglers or children, short models will be the perfect tool for full control of the tackle.
Build a form and sensitivity when catching from the board
The rod's structure determines its reaction to the rod's graffiti and the nature of the wiring. fast and superfast These forms allow you to do a powerful but short cut, which is critical when using wicker cords and fishing at depths where the fishing line is minimal and the signal is transmitted instantly.
Slow or medium boating is rarely used, mainly for specific tasks, such as catching fluctuating splashes or when you need a long cast of light baits from the side of a drifting boat. However, in classic jig or trolling, noodle whips do not provide the necessary information. The angler must feel every touch bait bottom or (algae).
The sensitivity of tackle in a boat is often higher than on shore, simply because the angler is closer to the epicenter of events and holds the rod almost vertically. This allows for the use of stiffer forms that transmit even the most timid perch pokes directly to the hand. The rigidity of the comet also helps in animation jerk lures, making jerks sharper and whippier.
- 🎣 Fast (Fast): Ideal for jig, twigging and jerking, provides excellent cut.
- 🐟 Extra Fast: It is used for catching soft plastic and silicone baits, where you need an instant reaction.
- 🌊 Medium: Suitable for trolling and catching rotating squirrels where some depreciation is required.
It's worth noting that rigidity can be a bad joke when fishing with a delicate mouth, such as trout or graymouth, even from a boat, and in such cases, it's better to choose a model with a borderline formation that can extinguish the fish's jerks, but remains quite informative.
Choosing a coil and cord for boat tackle
The gear must be balanced, and the choice of the coil here plays no less a role than the choice of the rod. non-inertial or multiplier In recent years, multiples have become the standard for serious boat fishing due to their traction power and reliability.
The size of the spoole should allow you to wind a sufficient amount of cord, but without fanaticism. For depths of 10-15 meters, 150 meters of wicker with a diameter of 0.16-0.20 mm according to the Japanese classification, the use of thick cords is justified in catching a trophy pike or catfish, where strength comes to the fore.
| Type of catch | Recommended coil size | Schnook diameter (mm) | Type of coil |
|---|---|---|---|
| trolling | 4000-6000 | 0.20 - 0.30 | Non-inertial / Multiplier |
| Jig in the plumb | 2500-3000 | 0.12 - 0.16 | Non-inertial |
| jerking | 7000+ / Multiplier | 0.30 - 0.40 | Multiplier |
| Twidding | 2000-2500 | 0.10 - 0.14 | Non-inertial |
The wicker cord is the only option for boat fishing, and its zero extensibility allows you to feel the bite at any depth and make an effective cut. Monophile fishing line can only be used in rare cases, such as when fishing in overgrown areas where depreciation is important, but this is rather an exception to the rule.
☑️ Checking tackle before exit
Tactics of catching: trolling, jig and sheer flaming
The boat provides a unique opportunity to apply tactics that are inaccessible to the coast. trolling This is probably the most efficient way to find active fish in large areas, where the spinning acts as a nod and shock absorber, and the rod is placed in the holder, and the angler controls the process by watching the tip of the whip, and a sharp nod or tension is the signal to cut or turn off the gear.
The boat jig is very different from the shore jig, so you can stand right above the brow or the dump and grab it vertically, so you can use heavier loads and not depend on the wind, you can only wire with the brush, you can swing the rod with minimal amplitude, which requires a high sensitivity rod in the upper segment.
The sheer flare is a realm of short, powerful rods, where the winter balalaikas are replaced by summer shorts with a dough for large glitters and balancers, and the technique is like winter fishing, but on a scale: sharper swings and large prey, where spinning has to withstand the jerks of fish weighing several kilograms on a short lever.
⚠️ Warning: When fishing in a plumb, never put a rod on board a boat without fixing. A sharp jerk of a large fish or a hook can pull an expensive tackle to the bottom in seconds. Always use a safety rope for the coil or a reliable holder.
And the classic rolling band of sectors from the anchored boat, in which case the rod length of 2.1-2.4 meters will be the most comfortable, allowing you to make accurate throws at the right point and control the wiring. It is important to remember the camouflage: the boat creates shadow and noise, so sometimes you need to sail from the fishing point 10-15 meters.
The Secret of Successful Trolling
For successful trolling, it is important not only to have a powerful spinning, but also to properly adjust the entrapment of the wobbler. Use downriggers or minarnas to accurately control the depth of the bait, especially at great depths where the usual release of the line does not give the desired result.
Maintenance and storage of boat gear
Aggressive aquatic environment, sun and constant loads do not pass without a trace for equipment. Spinning for the boat It is exposed to salt water (in the case of the sea) or simply constant humidity, which requires careful care. After each fishing, you need to wipe the form and coil with a dry soft cloth, removing moisture and dirt.
Pay special attention to the bandwidth. Sand caught in the ring frame, when loaded, works like an abrasive, rubbing the cord and damaging the insert. Regular checks of the inserts will help avoid breaks on the trophy fish. Also check the status of the handle: the cork or EVA materials must be clean so that the hand does not slip when caught.
Keep the rods in disassembled form, in rigid tubes or covers, protected from direct sunlight and temperature changes. Do not leave the gear in a closed boat in the sun - high temperatures can deform the form or weaken the adhesive joints.
- 🧼 Wash the coil with fresh water after fishing in a salty pond.
- 🔧 Periodically lubricate the mechanism of the coil with specialized oils.
- 🌡️ Avoid storing gear at temperatures below -10 C and above +40 C.
Replacing worn items like a spoole or handle in a timely manner will extend the life of your favorite instrument. Remember that quality service is an investment in future trophies and the enjoyment of the fishing process.
Proper maintenance of tackles increases their service life by 2-3 times and guarantees reliability in the (key point) fight against the trophy.
Frequently Asked Questions (FAQ)
Can a sea rod be used for fishing in freshwater bodies?
Sea rods have a high safety margin and resistance to salt water, which makes them excellent candidates for catching large pike, catfish or pike on large rivers and lakes, the only caveat is that they can be heavier than specialized freshwater models.
How long should a spinning be for a small inflatable boat?
For a small inflatable boat (NDB), the optimal spinning length is 1.5-1.8 meters, which will allow you to comfortably sit together without touching the sides and gear, and easily manage the gear in a limited space. Longer rods will create discomfort and can damage the cylinders.
Do I need a special spinning for trolling?
It is advisable to use rods marked as "Trolling" and have a reinforced design, more powerful rings and a handle designed to withstand a long load in the holder, a conventional spinning may not withstand constant tension of the line and vibration when the boat moves.
Why does the tip of the spinning break when fishing from a boat?
Most often, this is due to the cord overhang when throwing or a sharp jerk when cutting when the line was not stretched, also the cause may be a blow with a blank on the side of the boat or a metal detail during the landing. Be careful and monitor the position of the whip.
Which coil is better to choose for boat jig?
For boat jig, a 2500-3000 Shimano non-inertial coil with a gear ratio of about 5.0:1 - 6.0:1 is ideal. Good cord laying and reliable friction are important. Multipliers are also effective, but they require addiction.