Fishing from a motorized boat is not just a way to catch fish, but a true art that combines wiring accuracy, predatory behavior and boating skills. Unlike classic trolling or jig fishing, it requires a special technique where the speed, depth and trajectory of the bait play a key role. But why does the motorboat give the advantage? It's simple: it allows you to control the speed of movement with jewelry accuracy, maneuver along the flow and quickly change locations in search of an active predator.
Many anglers mistakenly believe that the path is for professionals with expensive equipment, but in fact, even a beginner can master this technique if he understands the basics: from choice to choice. speed-optimal till-shoot bait In this article, we'll go through all the nuances, from boat and motor preparation to the wiring secrets that experienced spinners use, and you'll also learn how to avoid the typical mistakes that negate all the effort on the water.
Why is a motorboat better for catching the track?
The main advantage of a motor boat over a non-motor boat is speed and directional stabilityWhen fishing on the track, it is critical to keep the bait at a constant speed (usually 1.5-3 km / h), which is almost impossible to do on paddles or under sail.
- 🎯 Accurately maintain a set pace, imitating the natural movement of the fry.
- 🔄 Quickly adjust the course when changing the direction of the wind or current.
- 📏 Control the depth of the bait dive due to the speed (the slower, the deeper the luster goes).
- 🚤 Maneuver in vast waters without wasting power on rowing.
In addition, the motor boat provides an opportunity scavengeThis is particularly important in large lakes or rivers with a patchy bottom. Rybinsk Reservoir or Lake LadogaAnd where predators can concentrate on remote jars or dumps, you can't do without a motor, but there's a caveat: not every motor is right for the track. electric motor (for example, Minn Kota Terrova or MotorGuide Xi5), but gasoline outboard motors of small power (2-5 hp) also cope if you can manage the gas skillfully.
⚠️ Warning: When using a gasoline engine, avoid sharp gas jerks, which leads to uneven wiring and scares off fish. It is better to train in advance to maintain stable idling speeds.
Selection of tackles for catching on the track
The track gear must be balanced: sensitive enough to fix the bites, but also strong enough to withstand the fight against the trophy predator.
| Component | Recommendations | Examples of models |
|---|---|---|
| The rod | Length 2.1-2.7 m, test 10-40 g, fast construction | Major Craft Crostage CRX-802ML, Daiwa Prorex X 702ML |
| Coil | Non-inertial, size 2000–3000, with smooth friction | Shimano Nasci 2500, Abu Garcia Revo SX 30 |
| Leska/cord | Tiles 0.10–0.16 mm or monofile 0.20–0.25 mm | Power Pro 15 lb, Sufix 832 0.12 mm |
| Decoys | Wobblear-minnows, fluctuating splendors, silicone baits on jig heads | Rapala CountDown, Mepps Aglia, Keitech Swing Impact |
Pay special attention bait-pickingIt's perfect for the track.
- 🐟 Wobblew-minnow (for example, Rapala Original Floater) is a universal pike and perch option.
- ⚡ Fluctuating splendors (Mepps Syclops, Blue Fox Vibrax) - perfectly work at a depth of 2-5 m.
- 🎣 Silicone on jig heads (for example, Keitech 3" on a cheburash 5-10g) - for catching a pike.
Critical nuance: when fishing on the track with a wicker, be sure to use a leash of fluorocarbon or titanium 20-30 cm long Pike easily snacks even the most durable braid!
Wiring technique: how to conduct bait correctly
The secret of successful fishing on the track lies in the uniformBut "uniformity" doesn't mean monotony -- experienced anglers vary speed, add pauses and jerks to mimic the behavior of an injured fish.
- Classic track.: uniform movement at a speed of 1.5-2.5 km / h. Suitable for wobblers and oscillating flavours.
- Stepwise wiring: alternating uniform motion with pauses (2-3 seconds) Effective for silicone baits.
- "Twisting on the Move": short rod jerks while the boat is moving, provokes the predator to attack.
It is important to understand that the speed of wiring depends on:
- 🌊 Currents: on a strong current, the speed of the boat should be higher so that the bait does not "sink".
- 🐠 Fish activities: in cold water wiring is slower (1-1.5 km / h), in warm water - faster (up to 3 km / h).
- 📏 DepthsThe deeper the bait, the slower it leads (due to water resistance).
⚠️ Warning: If you don't have a wiring after 10 to 15 minutes, change the speed by 0.5 km/h or change the bait. The predator often reacts to minor changes in the presentation.
☑️ Preparation for wiring
The best places to catch on the track
The success of the fishing depends on the right location, the predator concentrates where there is a feeding base and shelter.
- 🏝️ Blows and dumps - sharp changes in depths from 2-3 m to 5-8 m. There is often a pike and a pike.
- 🌿 Cane or water-coat thickets - but you need to carry out the bait along the edge, not inside the thickets.
- 🚢 Riverbed pits - deep areas of rivers where fish accumulate in hot weather.
- 🌊 Currents near bridges or dams Here the predator waits for prey, which is demolished by the stream.
In large water bodies (e.g., Ivankovo Reservoir or Volga) effective fishing on deep-water dump with a transition from 4-5 m to 8-10 m. to search for such places use:
- 📱 echoer (for example, Garmin Striker 4 or Lowrance Hook2).
- 🗺️ Navigation maps (annexes) Navionics or C-Map).
- 👀 Visual landmarks: bird bazaars, fish splashes, changes in the color of the water.
The key point is, if you find a promising location, but there are no pecks, don't rush out. Sometimes the predator becomes active when you change the bait or wiring speed.
How to catch on the track in windy weather?
Wind makes speed control difficult, but it can also be a plus: the wave creates natural bait fluctuations, use heavier baits (from 15 g) and drive the boat in the wind, not against it, which will help keep the wiring uniform.
Water Safety: Rules That Save Lives
Fishing from a motorboat requires not only fishing skills, but also strict safety rules.
- 🛟️ Life jackets: Must be on every passenger, even if you are a great swimmer.
- 📡 Communications: phone in a waterproof case or radio (on large water bodies, communication may disappear).
- ⚓ Anchor and rope: in case of engine stoppage or strong wind.
- 🔋 Spare battery: for electric motor or sounder recharging.
Special attention. GIME rules:
- On a boat with an engine of > 5 hp, the presence of boat registration certificate and management certificate.
- Fishing in prohibited areas (for example, near hydroelectric power plants or shipping channels) is prohibited.
- Nighttime: mandatory availability sidelight (white on the stern, red/green on the nose)
⚠️ Warning: Never go on the track alone in a large area, even experienced anglers are in an emergency (motor failure, severe weather deterioration), with a minimum crew of 2.
Before getting on the water, check the weather forecast for Windguru or WindyA sudden storm is especially dangerous - it is better to return to shore in advance on a motor boat if the wind speed exceeds 10 m / s.
Tuning boats for the path: what really needs
To make fishing as comfortable as possible, many anglers modify their boats.
| Modifications | Why do you need it? | Examples |
|---|---|---|
| Installation of the electric motor | Accurate speed control, quietness | Minn Kota Ulterra, MotorGuide Tour Pro |
| Fastening for rods | Frees up your hands to control the boat | Rod Holder by Scotty or Ram Mount |
| Battery system | Power sonar and electric motor for 8-10 hours | LiFePO4 batteries Dakota Lithium |
| Elongated transneck | Increases stability in trolling | transom boards for PVC boats |
Some anglers also establish:
- 📟 Hydraulic steering wheel - for easy control at low speeds.
- 🔦 Deck lighting - for night fishing (but check local regulations - night fishing is prohibited in some regions).
- 🧲 Magnetic holders - for quick access to baits and tools.
However, not all modifications are justified, for example, installing a powerful gasoline engine (over 10 hp) on a small boat will lead to:
- ❌ Loss of maneuverability at low speeds.
- ❌ Increased noise that scares away fish.
- ❌ The need to register with GIMS (for motors > 5 hp).
Optimal setup for road fishing is a boat with a trolling motor, a fish finder, and rod holders. This combination gives you full control over presentation and increases your chances of success.
Typical Beginner Mistakes and How to Avoid Them
Even experienced spinners sometimes make mistakes when catching the track.
- Wrong speed.: too fast wiring (the fish does not have time to react) or too slow (bait "sinking"). DecisionUse GPS or sonar to control your speed.
- Ignoring the bottom relief: wiring over the pit and the eyebrow requires different approaches. Decision: study the depth map in advance.
- A hard line without a leash: pike easily bites the braid. Decision: fluorocarbon leash length of 20-30 cm is mandatory!
- Boat noise: banging fun, talking, hitting the boat. Decision: Move silently, use an electric motor.
Another common mistake. timingBest watch for the track:
- 🌅 Early morning (5-9 hours) The predator is active after night hunting.
- 🌇 Pre-set hours (17-21 hours) - Peak of the pike and pike.
- 🌧️ Before the rain or with variable clouds - fish bite more aggressively.
If you don't have a peep for 1-2 hours, don't persevere.
- 📍 Fishing spot (Move to another sleeve or sleeve).
- 🎣 Bait (change color, size or type)
- ⚡ Wiring speed (Increase or decrease by 0.5-1 km/h).
FAQ: Answers to frequent questions
Which motor is better for the road: electric or gasoline?
The electric motor is preferable because it is silent, allows you to control the speed accurately and does not scare the fish. The gasoline engine can be used, but only at low speeds (idle) and with smooth control of gas. For small boats (up to 3.5 m), an electric motor with a capacity of 55-80 lbs is optimal (for example, the engine is not limited to the engine). Minn Kota Endura C2 55).
What is the best speed for the boat?
The optimal speed depends on the bait and depth:
- For Woblers: 1.5-2.5 km/h.
- For oscillating fleas: 2-3 km / h.
- For silicone baits: 1-2 km / h with pauses.
Use GPS or applications like this Fishbrain for precise speed control.
Can I catch on the track from an inflatable PVC boat?
Yeah, but there's a nuance:
- The boat must be stable (width from 1.5 m).
- Optimal electric motor with transom fastening.
- Avoid strong waves – PVC boats are less resistant than aluminum boats.
Good option: boats of the series "Frigate" or "Corvette" with a hard bottom.
How to avoid entanglement of the line when fishing from two rods?
So that the lines don't get overstretched:
- Use rods of different lengths (e.g. 2.1 m and 2.7 m).
- Then, take them to the left and the right side of the boat.
- Use different colors for visual control.
They help. limiter-clip on board boats that fix the line in one position.
Do I need to use a sonar for the track?
The echo sounder significantly increases the efficiency of fishing, as it allows:
- See the relief of the bottom and find promising eyebrows.
- Determine the depth of the bait immersion.
- Find shoals of fish and predators.
Budget models: Deeper Pro+ (portable), Lowrance Hook Reveal 5 (stationary).