Fishing for rubber bands from a boat on the river

River fishing with a swimming facility offers a huge opportunity for the lover of quiet hunting, which is not available to coasters. Access to remote brows, pits and river dumps allows you to get trophy fish, which rarely comes to shore. However, using classic bottom tackle from the board requires a special approach and specific skills.

One of the most effective and time-tested gear remains rubber-stampAnd despite the popular belief that it's a coastal tackle, fishing for rubber from a boat on the river is a highly effective method, especially in conditions of strong currents and difficult bottom relief, and in this article we'll look at the nuances of this fishing.

The main advantage of the method is that it can silently get the loader to the desired point and quietly remove the gear without frightening the fish with the engine, which is especially true on large reservoirs and wide rivers, where the boat serves only as a platform for installing a stationary fishing point. Let's take a detailed look at how to properly prepare the equipment and choose a location.

Selection of the place and features of river fishing from the board

Finding a promising site for installing rubber bands from a boat is very different from coastal search, where the angler is not limited to the water cut-off line and can survey any depth. bottom-lineYou need to find a flat table, a way out of a hole or a gentle slope of a dump, where the fish will stand.

When fishing on the river, it is critical to consider the strength of the current. The rubber shock absorber in the water has its sailing, and the flow can tear down the line, which leads to crossovers and false bites. So you should choose the place based on the direction of the jet. Optimally, if the boat can be anchored perpendicular to the current or at a small angle, so that the gear falls on the bottom along the arc, rather than stretching into the string.

⚠️ Attention: Never install a rubber band in reverse current or whirlpools. Swirling the main line around the anchor tile or the gear itself will lead to loss of cargo and break of leashes at the first serious pull.

The depth at the fishing point also matters. For classical rubber bands, the optimal depths are from 2 to 6 meters.less than 1 metre) there is a high risk of entanglement of the gear against algae, and on ultra-deep pits (> 10 meters) it is difficult to control the position of the loader and the angle of operation of the shock absorber.

Design of gear: requirements for elements

The boat gear must be more powerful and reliable than the shore option. loader And the place where it connects to the rubber, and unlike the shore where you can throw the load, you lower it from the boat, so the weight can be any, but the shape matters, and the best choice is a flat loader with scallops or a heavy feeder-rocket that lies safely at the bottom.

Rubber shock absorber is the heart of the tackle. For river fishing from a boat, it is recommended to use an aircraft model rubber with a cross section of 1.5-2 mm. The length of the rubber insert is calculated based on the distance and depth. The optimal ratio of the length of the fishing line to rubber is 3:1 or 4:1.

• 🎣 Main line: Use a monophile with a diameter of 0.4-0.5 mm or a wicker cord with a tear load of at least 15 kg. The tile is less stretchable, which improves sensitivity, but the monophile better extinguishes the jerks of fish.
• 🪝 Leads: Leash length varies from 20 to 50 cm On the course it is better to put shorter leashes (20-30 cm) so that they do not overwhelm the main line.
• 📏 Insert with hooks: The distance between the hooks should be longer than the length of the leash to avoid overlapping. It is usually 1.5-2 meters.

Pay special attention to the vertebrae, in the design of the rubber band, they should be enough to compensate for the twisting of the line, which inevitably occurs when you exhaust the gear with your hands. turn-piece They'll extend your life.

Boat installation process and anchoring

Installation of gear from a boat is a process that requires coordination and a clear algorithm of actions. It is qualitatively difficult to do this alone, so it is desirable to have a partner. One person controls the boat and anchor, another person unwinds the gear. First, the loader goes to the bottom with rubber tied to it.

Once the load has touched the bottom, the boat is slowly pulled aside, unwinding the main line with hooks. It is important to make sure that the line goes out freely and does not form loops. When the desired length is selected, the boat is anchored. "two anchors"One on the nose, the other on the stern, or the anchor shaft in the stretch.

Once the boat is fixed, the gear is selected to fit the nozzle, which requires carefulness so that the leashes are not confused. The line is chosen by "steps", each hook is fitted and carefully placed on board or in a special compartment, and after the process is completed, the line is smoothly ejected back into the water until the shock absorber is tense.

Catch tactics and bait selection

Fishing for rubber bands from boats is often passive, but that doesn't mean that the angler can nap. lift The tackle (game) can provoke a predator to attack, especially if it is a perch or perch. A light movement of the nozzle on the current attracts the attention of the fish better than a static hook lying at the bottom.

The choice of bait is dictated by the object of the fish. For a peaceful fish (brush, carp, gustera), the worm, the worm, the barley and the dough work perfectly. For a predator (pike, perch, pike) they use bait, fry or cutting. On a river with a strong current, the nozzle must be securely fixed so that it is not hit by a jet or small fish.

fish-fish	Optimal bait	Size of hook	Activity time
Breeze	Worm, squirrel, sandwich	№ 6-8	Night, early morning
Sudak	Malek, cutting.	№ 4-6	Twilight, night.
Carp	Dough, worm, manca.	№ 8-10	Morning, evening.
Perch	Worm, baby.	№ 5-7	All day long

It's important to experiment with sandwiches. A combination of worm and worm, or corn and foam often works better than a nozzle. On the river, the color of the bait can also play a role: bright wool or colored foam is more noticeable in murky water.

Fishing technique and safety

The way you take fish from a boat to a rubber band is different, because the gear is stretched, you have to be careful when you cut it, so you don't break the lip of the fish and you don't get the hooks in your neighborhood, and you pick the line with your hands, you put it in rings on the bottom of the boat or in a yawner. A sharp jerk A large fish can knock a fishing rod out of its hands or even flip a light boat if it catches overboard.

Hooks with live fish are particularly dangerous, and when they are removed from the water, the hooks are free-flying and can hurt the angler or hurt the fisherman. PVC material So always keep a yawner on hand to remove fish and watch the loose ends of the leashes.

⚠️ Attention: It is strictly forbidden to choose a line of gum, wrapping it on your hand or finger! When a large fish jerks sharply or catches a line, it can deeply dissect the skin, damage tendons or even cause a hand injury. Use only manual brute force.

If you're caught in the process, you don't have to pull the gear as hard as you can, you'd better ease the tension, you'd better let the line play, and you'd try to pull the other side, and often that's the way to release the hooks, and if the hook is dead, sometimes you have to sacrifice the leash by ripping it off at the knot.

Seasonal Features and the Impact of Weather

The effectiveness of fishing for rubber from a boat depends on the time of year. In spring, during the pre-spawning course, the gear works perfectly, because the fish go in tight schools along the channel. In summer, in the heat, the fish rolls to deep areas where there is no access from the shore, and the boat becomes the only chance of catching.

In autumn, when the water cools, the stick shifts to deeper pits, while gum allows you to catch the bottom layers where the cooling fish stands. However, autumn fishing is complicated by frequent storms and winds. On large water from a boat in windy weather, it is extremely difficult to catch thin gear due to crossovers.

The effect of the moon phase on the cool

Many anglers have noted that during the full moon, the pecking of peaceful fish on bottom gear worsens, and the predator, on the contrary, becomes active, but on rivers with strong currents this factor is often offset by water levels and light.

Wind is the main enemy of the rubber band from the boat. It creates a wave that rocks the boat, changing the tension of the tackle. This leads to constant false alarms and entanglement of hooks. If the wind blows into the side, you better shift to a protected bay or change the angle of the boat.

Frequent Mistakes of Beginner Fishers

Beginners often neglect the build quality of their tackles using cheap rubber or old fishing lines with "fatigue." On river fishing from a boat, losing tackle due to a cliff is not just losing hooks, it's the risk of losing the boat if the anchor entangles. Always check the tackle at home, before you even go to the pond.

Another common mistake is to miscalculate the length of the rubber, and too short rubber will create a tremendous amount of tension, and the fish will feel resistance to bite, spitting out the bait, too long will not give the necessary cushioning and control over the tackle. The golden rule: when fully stretched, the rubber should increase in length by 3-4 times, maintaining elasticity.

And many people ignore the need for feeding. Even from a boat, you can effectively feed a point. Use a feeder that delivers the mixture exactly to the hooks. A dense ball of bait with clay, thrown from the hand, can carry the current, and the feeder will lower the food exactly on the table.

Legal aspects and rules of GIMS

Boat Fishing requires not only fishing rules, but also safety rules on the water. Having a life jacket on every person in the boat is a requirement that can cost lives to neglect. Rubber is a lingering tackle, anglers can get carried away and lose their guard.

With regard to fishing legislation, the use of bottom tackles with more than the number of hooks allowed (usually more than 5-10 per person, depending on the region) can be considered poaching. Always check local fishing regulations for your pond. In some regions, fishing from a boat during spawning is completely prohibited, even with a motor that does not work.

⚠️ Attention: Installation of gear in the waterway of navigable rivers is prohibited and life-threatening. You can be dragged under the screw of a passing vessel or damage the gear, which will lead to conflict with the captain of the boat and fines.

Remember that having a registered boat and the rights to operate a small boat is also a requirement for legal fishing from a boat.

FAQ: Frequently asked questions

Can I catch a rubber band from an inflatable PVC boat?

Yes, but with caution, PVC material is easily damaged by hooks, be sure to use a hard bottom or litter to lay the gear, and always monitor the loose ends of the fishing line so that they do not hang around the sides.

What weight is a loader needed for a river with a strong current?

Weight depends on the depth and strength of the flow. Usually used loaders from 300 grams to 1 kg. It is better to use loaders with grenades or make composite loaders of lead plates, so that they hold the gear in place.

Do I need a sniffer when fishing from a boat?

Yes, it is mandatory. Visual (nod, firefly) or sound (bell, electronic alarm), the line of the rubber band often sags or is pulled by the wind, and you can skip the bite without a clear indicator.

How to store gum between fishing trips?

Rubber needs to be removed from the stretch, it's better to keep the gear straightened, in the shade, away from heat sources and ozone, and rubber shock absorber ages even without use, so you shouldn't keep the gear for years without checking.