Successful fishing from a boat often depends not only on the well-chosen location and the sounder working, but also on the final chord - catching the trophy. boat-suckerIt's a tool that's becoming an indispensable tool for catching large fish, and many newcomers underestimate the importance of this accessory by relying on the power of their hands or bumpers, but the risks of missing fish or damaging gear with this approach increase many times over.
The current market offers a huge variety of models adapted specifically for use on water, such as compact telescopic variants, floating structures or specialized ones. landing nets Choosing the right tool not only saves the catch, but also minimizes stress for the fish if you practice the principle. Catch & Release.
In this article, we will discuss in detail the design features, materials of manufacture and criteria for choosing the perfect sucker for your boat. You will learn why the length of the handle matters, how the grid from the fishing line differs from the fabric one, and how to properly fasten the tool on board so that it is always at hand at the crucial moment.
Design features of boat suckers
The main difference between boat suction and shore suction is the ergonomics and dimensions. When you're in a boat, you're limited by space, so you're not in a boat. handle The tool should not be excessively long, as it happens in coastal models, but too short handle will not allow you to safely pick up fish without leaning over the side. The optimal length of the working part varies between 60-120 cm, which provides a comfortable coverage of water on the side.
The second critical element is rim In boat models, it's more often triangular or drop-shaped, making it easier to submerge the net into the water at the right angle. Round rims are also found, but they're less convenient for sampling fish from the low side. The rim material has to be resistant to corrosion. aluminum and stainless steel They are the standard of quality.
⚠️ Attention: It is strictly not recommended to use podsucks with sharp edges on the rim inside an inflatable PVC boat. Any burrow or sharp angle with careless movement can puncture the balloon, turning fishing into a struggle for survival.
The handle-rim connection can be fixed or rotary. For a boat, a model with the ability to fix the angle of the suction head is preferred, which makes it easier to store and use in a cramped cockpit. depreciationThey are putting out the big fish at the last minute.
Classification by type of handle and folding
The choice of handle design has a direct impact on the ease of transportation and storage, and in the limited space of a boat or boat, every centimeter counts.
- 🎣 Telescopic: The most popular option: the handle is extended from several sections, allowing you to compactly fold the sucker up to 40-50 cm, ideal for storage in harundukas or special glasses on board.
- 🎣 Folding (with hinge): The handle has two or three pieces connected by hinges, which fold in length, but when unfolded, they can have backlashes, which reduces reliability when catching a trophy.
- 🎣 Floating: A specialty type where the handle is made of foam or has sealed cavities, and when it falls overboard, it does not sink, which is critical for fishing alone.
- 🎣 Composite (modular): The handle is assembled from individual segments, like telescopic fishing rods. Reliable, but take time to assemble and disassemble, which can be uncomfortable in active rods.
When choosing a telescopic model, pay attention to the quality of the ring fixation. Cheap mechanisms can be used to fix the rings. jam It's loaded, or it's folded spontaneously, and the presence of rubber seals in the joints prevents sand and silt from getting in, prolonging the life of the mechanism.
If you fish alone, only choose a floating model of podsucks. Falling a tool to a depth far from the shore can leave you without the ability to get large fish.
Materials of the grid: line, fabric or metal?
The net is the working part of the sucker, and the safety of the fish caught and the integrity of your hooks depends on its properties. nylon-net (del) is highly durable, but has the property of confusing hooks, especially if there are beards on tees, and thrusting fish out of such a net takes time during which the fish is stressed and the hooks can damage its gills.
The modern alternative is a grid of line They're very water-free, they dry quickly, and they're very smooth, they don't get stuck in the cells, so they can release the trophy quickly, and they also have less traumatic fishing mucosa, which is important for sustainable fishing.
Metal mesh (stainless wire) is less common and for catching predators with sharp teeth, such as pikes. However, they are heavier, can rust if the coating is damaged and require careful care. silicone-coated synthetic grid.
| Type of grid | Water absorption | Risk of hook entanglement | Safety for fish |
|---|---|---|---|
| Nylon (traditional) | High. | Highly | Medium |
| Leska (mononize) | Missing. | Low. | High. |
| Rubbed | Missing. | Minimum | Maximum |
| Metallic | Missing. | Medium. | Low (traumatic) |
For fishing with let-off fish (Catch & Release), use only nets from the line or rubberized models to minimize damage to scales and mucous layer.
Installation and fastening of the suction on the boat
The right placement of the suction on board is the key to successful landing. The tool must be available instantly, with one hand, without the need to be distracted from the control of the gear. holder (cup holders or specialized fasteners) that are mounted on board or transom.
In PVC inflatable boats, the situation is more complicated because of the lack of rigid structures, and there are several fixation methods used here:
- 🔧 Licross anchorage: Special clips worn on the welded on board cable (litros) allow you to move the sucker along the side.
- 🔧 Brackets for transom plates: If the boat has a motor with the ability to fasten accessories, the sanitary can be fixed next to the tiller.
- 🔧 Internal pockets: Some boat models have special pockets in inflatable tubes, where you can insert a folded sucker with the handle down.
It is important to ensure that when pitching or rolling the boat, the suction does not fall overboard and fall inwards, causing interference. If you use a telescopic model, make sure that it is folded and fixed with a gum or a hold until the moment of pecking.
⚠️ Attention: Never leave a decomposed suction lying on the bottom of the boat or hanging overboard unattended. A sudden jerk of the boat or excitement, it can catch on the propeller of the engine or cause injury.
☑️ Checking the podsuck readiness for the season
Fishing technique using subsuction
Many anglers make the mistake of trying to catch fish with active poodling movements, which frightens prey and often leads to off-shoots. start already tired fish above the net, and then smoothly lift the sucker, the sucker should be submerged in the water before waiting for the fish.
The process is as follows:
1. bring the fish to the boat, holding it on a strained line.
2. Download. suction-head into the water before the fish's face.
3. Smoothly bring the fish above the net, without making sudden movements.
4 When the fish is above the net, simultaneously raise the suction up and lower the rod (if the design permits) to select a slack.
If you are fishing from the boat, try to bring the fish to the sea. nose or feed But not to the side below, because the angle of ascent will be too steep, and in tight places it is better to use suction bars with a rotary head, allowing you to change the angle of attack.
The secret of pike-fishing
When catching a pike, never pull it off the tail - it will instantly turn around and eat a line or net. Bring the sucker strictly under the head, closing its view and pressing it to the side of the boat.
Inventory care and maintenance
After every fishing, especially in salt water or muddy waters, the suction requires maintenance. The net must be thoroughly washed with fresh water to remove the residues of mucus, silt and salt that can destroy synthetic fibers or cause corrosion of metal elements.
Telescopic handles need lubrication periodically. silicone lubricantIt's not recommended to use solidol or lithol, because it thickens in the cold and collects abrasive particles.
Check the net's mounting points regularly. Weakened screws or worn mounting threads can cause the net to twist or tear off when a large trophy is pulled, and timely replacement of fasteners is a cheap insurance policy against catch loss.
FAQ: Frequently asked questions
How long should the handle of the suction for a PVC boat be?
For inflatable boats, the optimal length of the handle in working condition is 80-110 cm This allows you to reach the water without being outweighed over the side, but the handle will not rest on the opposite side or interfere with rowing.
Can I use a beach suction for fishing from a boat?
Technically possible, but inconvenient. Coast suctions are often 2-3 meters long, which in a boat creates sailing, interferes with management and takes up too much space, and they can be heavier, which is critical for small boats.
How to store the suction so that the net does not rot?
Store the suction in a dry, ventilated place, the net should be completely dry before packaging, it is best to keep it in a straightened form or in a special case suspended by the handle to avoid mold and unpleasant smell.
Should I change the net if it breaks a little?
Yes, even a small gap can be fatal when catching a large fish, which with its weight and jerks will instantly increase the hole. Repair of the net is possible, but it is safer to replace it completely, especially when it comes to catching trophy fish.