Catching a large bream in a strong current is a task that requires not only patience, but also specific gear that can withstand the flow of water. One of the most effective methods in such conditions is the use of a tool, popularly called the tool. "eggs."This bottom tooling allows fishing from the boat, ensuring a stable position of the bait at the bottom even at a significant flow speed.
The main secret of its popularity lies in the unique design of the sliding boat, which moves freely on the fishing line and does not allow the fish to feel the weight when grazing. Unlike the classic feeder, it uses two anchors, which radically changes the tactics of fishing and allows you to catch large areas of the channel. BreezeBeing a bottom fish, prefers to look for food on the stream, where water brings oxygen and washes the larvae from the soil.
In this article, we will discuss in detail how to assemble the gear correctly, what components are needed for installation and how to choose the optimal place to park. Understanding the physics of the process and the behavior of fish under the boat will allow you to significantly increase catches.
The principle of operation and advantages of the “egg” gear
The design, called the "eggs," is an improved version of the classic "ring," and the main difference is that the feeder (or two anchors) is not rigidly attached to the main line, but slides along it with a special loader of egg shaped. self-shoot It also masks the weight of the load, and when the bream comes to the feeder, it doesn't meet resistance, because the line goes freely through the hole in the load.
Using two anchors instead of one stationary feeder allows the fisherman to maneuver. You can lower anchors upstream, and then, using oars or motors, move the boat sideways, changing the angle of bait. This is especially true when fishing for eggs from a boat, because a pack of bream can be not strictly under the stern, but slightly away from it. The mobility of the tackle gives a huge advantage over stationary dongs.
⚠️ Attention: When using heavy anchors on a clay or slurry bottom, there is a risk of getting stuck. Always have an emergency anchor or a detachment to avoid losing the tackle in the trunk.
Another important aspect is the sensitivity of the tackle, because the line goes through the sliding loader, any, even the most careful touch of the bait is transmitted to the nod or the top of the rod, which allows you to cut the fish when it is just beginning to try the nozzle. blush Characteristic neat bites, which are easy to miss on rough tackle, but the "eggs" are deprived of this drawback.
Choosing a rod and coil for fishing from a boat
Fishing with a swimming aid dictates its requirements for tackles. The rod should not be long, otherwise there will be problems with catching and placing the boat in a limited space. The optimal length of the form is from 1.8 to 2.4 meters. Longer sticks will simply interfere, cling to the sides and make it difficult to work with two anchors at the same time.
The rod test should be appropriate for the weight of the loads used. Since the fishing takes place on the current, the weight of the "eggs" or feeders can vary from 40 to 100 grams depending on the flow strength. 150 gramsThis will provide a margin of safety when catching trophy specimens and will allow you to make a confident cut at depth.
The coil can be both inertial and non-inertial. The main requirement is the reliability of the forester and friction mechanism. The 3,000-4000 sized non-inertional Shimano models are the best choice. They allow you to quickly rewind the fishing line when changing places or catching. Inertial Nevsky coils are also popular among conservatives for their simplicity and reliability, but require skill to work with them.
The important element is the nod. Egg fishing often uses lausan or metal nods, the length of which is matched by the weight of the loader. The nod must be stiff enough so that the current does not bend it into an arc, but sensitive enough to record the bite. Some anglers prefer to use the nod. feeder The tops are also an effective solution.
Installation of equipment: step-by-step instructions
Building gear requires care, because the proper geometry of the nodes is what the system works for. The main work unit is a sliding loader of an egg or an olive with two holes. The main line passes through one hole, the anchor cord through the other, and this separation of the line flows prevents the tackle from being swept and entangled when it is lowered to the bottom.
Below is a table with recommended fittings for different fishing conditions, and balancing will avoid frequent leash overlaps.
| Element of tooling | Weak current | Average flow | Strong current |
|---|---|---|---|
| Weight of the loader (eggs) | 40-60 | 60-80 | 80-120 g |
| Diameter of the main line | 0.25-0.28 mm | 0.30-0.35 mm | 0.35-0.40 mm |
| Length of leashes | 30-50 cm | 50-80 cm | 80-120 cm |
| Thickness of the lead line | 0.14-0.16 mm | 0.16-0.18 mm | 0.18-0.22 mm |
Once the sliding loader is placed on the main line, a locking knot or bead is placed, which limits the loader's upward movement, below this knot a sling or a leash is attached. The number of leashes usually varies from one to three. Using more hooks increases the likelihood of hooks, but increases the chances of catching fish in the flock.
☑️ Checking the equipment before getting on the water
Tactics of finding bream and anchoring the boat
The success of egg fishing depends 80 percent on the right place to go. Bream is a schooling fish, tied to the bottom of the bottom, you need to look for it on the eyebrows, dumps in the pits, outlets from the beds. The presence of a shell or sand tongues on the clay bottom is also a good sign. To find such places, you need a sonar that will show not only the relief, but also the presence of the fish.
Once you find a perspective point, you need to anchor properly, and the boat needs to be across the current or at an angle to it, so that the gear doesn't overlap and stay in the area of the feed plume. The anchors are lowered from the bow of the boat on long cords. It's important that the distance between the anchors is sufficient for a stable position, but not excessive, so as not to confuse the cords.
When you fish for eggs, you often use the "search" tactic. You don't stand in one place for hours, you move around, checking different horizons and points. If you don't bite for 15 to 20 minutes, it makes sense to move the boat 10 to 20 meters upstream or downstream. The bream can stand very locally, and the angler's job is to find that point.
Brushing and bait selection
The bream is gluttonous, but it's fastidious. The base of the bait must be heavy so it doesn't blow away instantly, but it's inert enough to make a dense feeding pole. It must have large fractions: millet, barley, corn, peas. The small fraction (dry, cake) creates mud and attracts fish visually and smellfully.
For fishing in the stream, bait often adds clay or soil from the shore, which makes the mixture heavier and allows the food to be delivered exactly to the bottom, preventing it from dissolving into the water column. Flavors are better used by proven ones: anise, vanilla, garlic, hemp. Sweet fruit flavors work worse, especially on cold water.
As for the bait, there's a lot of diversity, and the classics for bream are:
- 🪱 Worm (manure or crawl) is a universal nozzle that works all year round.
- 🌽 Steamed corn or peas - perfectly cuts off small things and attracts large bream.
- 🍞 Sparrow and sandwiches – combinations of worm and corn often work wonders.
- 🧀 Mastirka and manka are good in the summer, when fish prefer plant nozzles.
Fishing and catching techniques
The fishing process begins with the anchors being lowered, the feed anchors being laid down upstream of the boat, the main hook line being pulled by the current and falling down at the bottom of the feeding spot, the rod being placed in the stern so that the line is stretched, but the nod is not overloaded.
The bream pecking often looks like a confident, but smooth nod down or straightening (if the line was stretched). You need to cut with a sharp, but not sweeping, hand movement. The amplitude of the cut depends on the length of the line to the fish: the greater the depth, the wider the cut should be to pick up the slack of the line and cut through the lip of the fish.
The bream requires coolness. The bream in the stream resists violently, using the flow of water as an additional force. You should not drag the fish "over the top." Better tire it by holding the line and pointing the fish against the current. When the bream comes to the boat, it should be quickly but carefully lifted in a sucker. Hands are not recommended to take the bream - the mucus on the scales will make it slippery, and it can break at the last minute.
⚠️ Warning: Never wind a fishing line on your finger when catching a large fish! On a strong current, a bream jerk can lead to serious hand injuries or even a broken finger.
Frequent Mistakes of Beginner Fishers
One of the most common mistakes is to use too rough tooling. Breath, especially in clear water and low water levels, can be very careful. Thick fishing line and large hooks often scare fish away. Try to use as thin as possible but strong leashes that match the size of the expected trophy.
The second mistake is the wrong length of the leashes. If the current is strong and the leashes are short, the hooks may get tangled on the main line or lie in the dead zone outside the feed plume, and vice versa, too long leashes in the weak current will lie on the bottom of a shapeless pile, and the fish will simply not notice them.
The third mistake is noise on the water. Breath hears vibrations very well. Loud talk, hitting the side of the boat, running the motor on idlers right above the fishing point, all of which can scare the fish away. Be quieter than the water, and the result will not be long in coming.
And remember, egg fishing is a dynamic process, and constantly analyzing the situation, changing the nozzles, adjusting the length of the vacation and the position of the boat is the key to successful fishing. Don't be afraid to experiment, and luck will surely smile at you!
Do I need a special permit to catch eggs?
Egg gear is not formally poached, as it does not have many hooks (like a snatch) and does not damage fish stocks. However, fishing regulations may limit the number of hooks (usually no more than 2-4 per person) and prohibit spawning. Always check the current rules for your region.
Can I use eggs in the winter?
Yes, this method is effective in winter, especially on the first and last ice, when the fish are active, but the design of the gear can be adapted: instead of anchors, feeders, you use a heavy loader, and the feeder falls separately into the hole upstream.
Which color of line is better to choose?
For bream fishing at depth, the color of the line is not critical, since at a depth of 5+ meters, the fish navigates mainly along the lateral line and sense of smell. However, many anglers prefer to use a line of dark green, brown or transparent color to be sure of camouflage.
Why is the tackle called "eggs"?
The name comes from the shape of the sliding loader, which historically was made of lead and had an elongated egg-shaped shape, which provides better sliding on the fishing line and less sailing in the water compared to other forms of loaders.